Association between Sarcopenia and Survival in Patients Undergoing Gamma Knife Surgery for Brain Metastasis from Breast Cancer: A Retrospective Single-centre Cohort Study.

AIMS: Many recent studies related to cancer surgery have reported that sarcopenia influences mortality in surgical patients. However, few comprehensive studies have examined the associations between sarcopenia and short- and long-term surgical outcomes of metastatic cancer, especially breast cancer with brain metastasis. In the present study, we investigated the association between sarcopenia and mortality in patients who underwent gamma knife radiosurgery (GKRS) for brain metastasis with breast cancer. MATERIALS AND METHODS: This retrospective study analysed 157 patients who underwent GKRS for brain metastasis with breast cancer between January 2014 and December 2018. A Cox regression analysis was carried out to evaluate the association between sarcopenia and mortality at 90 days, 180 days, 1 year, 3 years and the overall period. RESULTS: In the Cox regression analysis, sarcopenia was significantly associated with high 90-day mortality (adjusted hazard ratio 3.46, 95% confidence interval 1.24-9.67, P = 0.018), 180-day mortality (adjusted hazard ratio 2.67, 95% confidence interval 1.37-5.22, P = 0.004), 1-year mortality (adjusted hazard ratio 2.39, 95% confidence interval 1.42-4.02, P = 0.001), 3-year mortality (adjusted hazard ratio 2.39, 95% confidence interval 1.53-3.74, P < 0.001) and overall mortality (adjusted hazard ratio 2.11, 95% confidence interval 1.37-3.26, P < 0.001). CONCLUSION: Sarcopenia could be a risk factor for short- and long-term mortality in patients undergoing GKRS for brain metastasis from breast cancer.

Extended X-ray absorption fine structure of dynamically-compressed copper up to 1 terapascal.

Large laser facilities have recently enabled material characterization at the pressures of Earth and Super-Earth cores. However, the temperature of the compressed materials has been largely unknown, or solely relied on models and simulations, due to lack of diagnostics under these challenging conditions. Here, we report on temperature, density, pressure, and local structure of copper determined from extended x-ray absorption fine structure and velocimetry up to 1 Terapascal. These results nearly double the highest pressure at which extended x-ray absorption fine structure has been reported in any material. In this work, the copper temperature is unexpectedly found to be much higher than predicted when adjacent to diamond layer(s), demonstrating the important influence of the sample environment on the thermal state of materials; this effect may introduce additional temperature uncertainties in some previous experiments using diamond and provides new guidance for future experimental design.

Experimental evidence of early-time saturation of the ion-Weibel instability in counterstreaming plasmas of CH, Al, and Cu.

The collisionless ion-Weibel instability is a leading candidate mechanism for the formation of collisionless shocks in many astrophysical systems, where the typical distance between particle collisions is much larger than the system size. Multiple laboratory experiments aimed at studying this process utilize laser-driven (I≳10^{15} W/cm^{2}), counterstreaming plasma flows (V≲2000 km/s) to create conditions unstable to Weibel-filamentation and growth. This technique intrinsically produces temporally varying plasma conditions at the midplane of the interaction where Weibel-driven B fields are generated and studied. Experiments discussed herein demonstrate robust formation of Weibel-driven B fields under multiple plasma conditions using CH, Al, and Cu plasmas. Linear theory based on benchmarked radiation-hydrodynamic FLASH calculations is compared with Fourier analyses of proton images taken ∼5-6 linear growth times into the evolution. The new analyses presented here indicate that the low-density, high-velocity plasma-conditions present during the first linear-growth time (∼300-500 ps) sets the spectral characteristics of Weibel filaments during the entire evolution. It is shown that the dominant wavelength (∼300µm) at saturation persists well into the nonlinear phase, consistent with theory under these experimental conditions. However, estimates of B-field strength, while difficult to determine accurately due to the path-integrated nature of proton imaging, are shown to be in the ∼10-30 T range, an order of magnitude above the expected saturation limit in homogenous plamas but consistent with enhanced B fields in the midplane due to temporally varying plasma conditions in experiments.

Characterization of a 1D-imaging high-energy x-ray backlighter driven by the National Ignition Facility Advanced Radiographic Capability laser.

Plastic deformation of samples compressed to Mbar pressures at high strain rates at the National Ignition Facility (NIF) forms the basis of ongoing material strength experiments in conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. Hard x-ray radiography is the primary means of measuring the evolution of these samples, typically employing a slit-collimated high-Z microdot driven by the NIF laser to generate >40 keV x rays [E. Gumbrell et al., Rev. Sci. Instrum. 89, 10G118 (2018) and C. M. Huntington et al., Rev. Sci. Instrum. 89, 10G121 (2018)]. Alternatively, a dysprosium "micro-flag" target driven by the Advanced Radiographic Capability laser (∼2 kJ, 10 ps) can deliver significantly higher spatiotemporal resolution [M. P. Hill et al., Rev. Sci. Instrum. 92, 033535 (2021)], especially in high-opacity samples. Initial experiments revealed problematic brightness and spectral gradients from this source, but by radiographing a set of diamond-turned, 105 µm-thick Pb test objects and supported by simulations using the 3D Monte Carlo code GEANT4, these geometry-dependent gradients across the field of view are quantified and mitigation strategies are assessed. In addition to significantly enhancing the modulation transfer function compared to the existing system, image stacking from multiple layers of image plate is shown to almost double the signal to noise ratio that will reduce uncertainties in future dynamic strength experiments.

Experimental Observations of Laser-Driven Tin Ejecta Microjet Interactions.

The study of high-velocity particle-laden flow interactions is of importance for the understanding of a wide range of natural phenomena, ranging from planetary formation to cloud interactions. Experimental observations of particle dynamics are sparse given the difficulty of generating high-velocity flows of many particles. Ejecta microjets are micron-scale jets formed by strong shocks interacting with imprinted surfaces to generate particle plumes traveling at several kilometers per second. As such, the interaction of two ejecta microjets provides a novel experimental methodology to study interacting particle streams. In this Letter, we report the first time sequences of x-ray radiography images of two interacting tin ejecta microjets taken on a platform designed for the OMEGA Extended Performance (OMEGA EP) laser. We observe that the microjets pass through each other unattenuated for the case of 11.7±3.2 GPa shock pressures and jet velocities of 2.2±0.5 km/s but show strong interaction dynamics for 116.0±6.1 GPa shock pressures and jet velocities of 6.5±0.5 km/s. We find that radiation-hydrodynamic simulations of the experiments are able to capture many aspects of the collisional behavior, such as the attenuation of jet velocity in the direction of propagation, but are unable to match the full spread of the strongly interacting cloud.

Measurements of electron temperature in high-energy-density plasmas using gated x-ray pinhole imaging.

We present measurements of spatially and temporally resolved electron temperature in high-energy-density plasmas using gated x-ray pinhole imagers. A 2D image of bremsstrahlung x-ray self-emission from laser-driven plasma plumes is detected at the same time through two pinholes covered with different filter materials. By comparing the attenuated signal through each filter, a spatially resolved electron temperature as low as 0.1 keV can be estimated. Measurements of the plasma plume taken from different directions indicate that imaging through extended plasmas has a negligible effect on the temperature estimates. Methods for estimating the expected signal, selecting filters, and incorporating the response of the detector are discussed.

High resolution >40 keV x-ray radiography using an edge-on micro-flag backlighter at NIF-ARC.

Radiography of low-contrast features in high-density materials evolving on a nanosecond timescale requires a bright photon source in the tens of keV range with high temporal and spatial resolution. One application for sources in this category is the study of dynamic material strength in samples compressed to Mbar pressures at the National Ignition Facility, high-resolution measurements of plastic deformation under conditions relevant to meteor impacts, geophysics, armor development, and inertial confinement fusion. We present radiographic data and the modulation transfer function (MTF) analysis of a multi-component test object probed at ∼100 keV effective backlighter energy using a 5 µm-thin dysprosium foil driven by the NIF Advanced Radiographic Capability (ARC) short-pulse laser (∼2 kJ, 10 ps). The thin edge of the foil acts as a bright line-projection source of hard x rays, which images the test object at 13.2× magnification into a filtered and shielded image plate detector stack. The system demonstrates a superior contrast of shallow (5 µm amplitude) sinusoidal ripples on gold samples up to 90 µm thick as well as enhanced spatial and temporal resolution using only a small fraction of the laser energy compared to an existing long-pulse-driven backlighter used routinely at the NIF for dynamic strength experiments.

Airflow limitation as a risk factor for vascular stiffness.

BACKGROUND: Cardiovascular disease is one of the main causes of mortality in patients with chronic obstructive pulmonary disease (COPD), and atherosclerosis is a cause of cardiac comorbidities in COPD. However, it is not clear whether airflow limitation is associated with atherosclerosis irrespective of smoking.OBJECTIVE: To investigate whether airflow limitation is independently associated with vascular stiffness.METHODS: We enrolled 18 893 participants (male 70.5%; mean age 47.5 ± 9.8 years; never smokers 44.2%) who underwent spirometry and brachial-ankle pulse wave velocity (baPWV) as part of a standard health examination at Ajou University Hospital, Suwon, South Korea, from January 2010 to December 2015.We defined vascular peripheral atherosclerosis as baPWV ≥ 1400 cm/s and airflow limitation as pre-bronchodilator ratio of forced expiratory volume in 1 sec (FEV1) to forced vital capacity (FVC) <70%.RESULTS: Mean baPWV was higher in subjects with airflow limitation (1477.6 ± 331.7 cm/sec, n = 638) than in those without airflow limitation (1344.1 ± 231.8 cm/sec, n = 18255, P < 0.001). In multivariate logistic regression analysis, the following were independent predictors associated with peripheral atherosclerosis (P < 0.05): age, male sex, fasting serum glucose, mean blood pressure, serum leukocyte count, serum low density lipoprotein level and FEV1.CONCLUSION: Airflow limitation was an independent predictor of vascular stiffness irrespective of smoking history, which suggests that airflow limitation is linked with atherosclerosis.

Measurement of Kinetic-Scale Current Filamentation Dynamics and Associated Magnetic Fields in Interpenetrating Plasmas.

We present the first local, quantitative measurements of ion current filamentation and magnetic field amplification in interpenetrating plasmas, characterizing the dynamics of the ion Weibel instability. The interaction of a pair of laser-generated, counterpropagating, collisionless, supersonic plasma flows is probed using optical Thomson scattering (TS). Analysis of the TS ion-feature revealed anticorrelated modulations in the density of the two ion streams at the spatial scale of the ion skin depth c/ω_{pi}=120 µm, and a correlated modulation in the plasma current. The inferred current profile implies a magnetic field amplitude ∼30±6 T, corresponding to ∼1% of the flow kinetic energy, indicating that magnetic trapping is the dominant saturation mechanism.

Combined surgical approach to intralabyrinthine schwannoma.

INTRODUCTION: Intralabyrinthine schwannoma (ILS) is a tumor originating from the Schwann cells in the inner ear. Various surgical approaches can be used for the resection of ILS. The aim of this report is to describe a case involving a 60-year-old man who was treated successfully with a combined surgical approach. CASE REPORT: The patient underwent a combined microscopic (transmastoid labyrinthectomy) and endoscopic procedure for surgical excision of ILS involving the vestibule and the lower half of the cochlear basal turn. The combined surgical technique enabled a complete removal of the ILS without removal of the unaffected cochlea as well as the external auditory canal. Besides additional exclusion of the middle ear, blind-sac closure of the external auditory canal and cavity obliteration were avoided. No postoperative complications were observed. DISCUSSION: A combined microscopic and endoscopic approach to surgery enables removal of the ILS involving the vestibule and the lower half of the cochlear basal turn while helping to reduce surgical radicality.

Akt1-Mediated Phosphorylation of RBP-Jk Controls Notch1 Signaling.

The Notch1 signaling pathway plays a crucial role in determining cell fate, including cell growth and differentiation. In this study, we demonstrated that the antagonistic action of RTK (receptor tyrosine kinase) signaling pathway on the Notch1 signaling pathway is mediated via Ras-PI3K-Akt1. The PI3K-Akt1 signaling pathway was shown to inhibit Notch1 signaling via phosphorylation of RBP-Jk. We observed not only reduced association between Notch1 and RBP-Jk, but also suppression of the Notch1 transcriptional activity. Our results demonstrated that Akt1 functions as a natural inhibitor of the Notch1 signaling pathway via phosphorylation of RBP-Jk.

Extreme Hardening of Pb at High Pressure and Strain Rate.

We study the high-pressure strength of Pb and Pb-4wt%Sb at the National Ignition Facility. We measure Rayleigh-Taylor growth of preformed ripples ramp compressed to ∼400 GPa peak pressure, among the highest-pressure strength measurements ever reported on any platform. We find agreement with 2D simulations using the Improved Steinberg-Guinan strength model for body-centered-cubic Pb; the Pb-4wt%Sb alloy behaves similarly within the error bars. The combination of high-rate, pressure-induced hardening and polymorphism yield an average inferred flow stress of ∼3.8 GPa at high pressure, a ∼250-fold increase, changing Pb from soft to extremely strong.

Surfactant protein D alleviates eosinophil-mediated airway inflammation and remodeling in patients with aspirin-exacerbated respiratory disease.

BACKGROUND: Surfactant protein D (SPD) is a member of the collectin family that lines the airway epithelial cells with host defense. However, the role of SPD in the pathogenesis of aspirin-exacerbated respiratory disease (AERD) is still unclear. METHODS: The serum SPD level was measured in patients with AERD (n = 336), those with aspirin-tolerant asthma (ATA, n = 442), and healthy controls (HC, n = 104). Polymorphisms of SFTPD in the study subjects were analyzed. The effect of LTE4 on SPD production through eosinophil infiltration was investigated in BALB/c mice. The protective function of SPD against eosinophils inducing inflammation and remodeling was assessed in vitro/vivo. The potential efficacy of nintedanib against airway remodeling through the production of SPD was evaluated. RESULTS: The serum SPD level was significantly lower (P < .001) in AERD compared with ATA patients, and negatively correlated with fall in FEV1 (%) after lysine-aspirin bronchoprovocation test and/or the urinary LTE4 level. In addition, polymorphism of SFTPD at rs721917 was significantly different in the study subjects (odds ratio, 1.310; 95% confidence intervals, 2.124-3.446; P = .002). LTE4-exposed mice showed an increased eosinophil count with a decreased SPD level in bronchoalveolar lavage fluid. Eosinophils increased α-smooth muscle actin expression in airway epithelial cells, which was attenuated by SPD treatment. Furthermore, nintedanib protected the airway epithelial cells against eosinophils by enhancing the production of SPD. CONCLUSION: The decreased level of SPD in AERD was associated with airway inflammation/remodeling under the eosinophilic condition, suggesting that modulation of SPD may provide a potential benefit in AERD.

Nonisentropic Release of a Shocked Solid.

We present molecular dynamics simulations of shock and release in micron-scale tantalum crystals that exhibit postbreakout temperatures far exceeding those expected under the standard assumption of isentropic release. We show via an energy-budget analysis that this is due to plastic-work heating from material strength that largely counters thermoelastic cooling. The simulations are corroborated by experiments where the release temperatures of laser-shocked tantalum foils are deduced from their thermal strains via in situ x-ray diffraction and are found to be close to those behind the shock.

Bremsstrahlung x-ray generation for high optical depth radiography applications on the National Ignition Facility.

We have tested a set of x-ray sources for use as probes of highly attenuating, laser-driven experiments on the National Ignition Facility (NIF). Unlike traditional x-ray sources that optimize for a characteristic atomic transition (often the n = 2 → n = 1 transition in ionized, He-like atoms), the design presented here maximizes the total photon flux by optimizing for intense, broadband Bremsstrahlung radiation. Three experiments were performed with identical targets, including a uranium x-ray source foil and a tungsten substrate with a narrow (25 µm wide) collimating slit to produce a quasi-1D x-ray source. Two experiments were performed using 12 beams from the NIF laser, each delivering approximately 46 kJ of laser energy but with different laser spatial profiles. This pair yielded similar temporal x-ray emission profiles, spatial resolution, and inferred hot electron temperature. A third experiment with only 6 beams delivering approximately 25 kJ produced a lower hot electron temperature and significantly lower x-ray flux, as well as poorer spatial resolution. The data suggest that laser pointing jitter may have affected the location and intensity of the emitting plasma, producing an emission volume that was not well centered behind the collimating slit and lower intensity than designed. However, the 12-beam design permits x-ray radiography through highly attenuating samples, where lower energy line-emission x-ray sources would be nearly completely attenuated.

Characterizing the modulation transfer function for X-ray radiography in high energy density experiments.

The Modulation Transfer Function (MTF) is an established means for characterizing imaging performance of X-ray radiography systems. We report on experiments using high energy, laser-driven X-ray radiography systems that assess performance using MTF values measured with the knife-edge projection method. The broadband, hard X-ray systems under study use line-projection imaging produced by narrowing the laser-generated X-ray source with a slit. We find that good contrast resolution can be achieved (the MTF = 0.5 at 75 µm wavelength) and that this performance is reproduced on different laser facilities. We also find that the MTF is sensitive both to the thickness of the line-projection slit and to the backing material thickness under the knife-edge. Both these sensitivities are due to a common mechanism, namely induced changes in the spectrally-averaged spatial widths of the X-ray source. The same line-projection system is also used on experimental campaigns measuring Rayleigh-Taylor instability growth by dynamically imaging sinusoidal, high Z micro-targets with wavelengths of 100 µm or less. By applying the measured MTF values to correct the ripple target contrast measurements, we can predict ripple growth to approximately 10% accuracy.

Developing a high-flux, high-energy continuum backlighter for extended x-ray absorption fine structure measurements at the National Ignition Facility.

Extended X-ray absorption fine structure (EXAFS) spectroscopy is a powerful tool for in situ characterization of matter in the high energy density regime. An EXAFS platform is currently being developed on the National Ignition Facility. Development of a suitable X-ray backlighter involves minimizing the temporal duration and source size while maximizing spectral smoothness and brightness. One approach involves imploding a spherical shell, which generates a high-flux X-ray flash at stagnation. We present results from a series of experiments comparing the X-ray source properties produced by imploded empty and Ar-filled capsules.

Evolution of asexual and sexual reproduction in the aspergilli.

Aspergillus nidulans has long-been used as a model organism to gain insights into the genetic basis of asexual and sexual developmental processes both in other members of the genus Aspergillus, and filamentous fungi in general. Paradigms have been established concerning the regulatory mechanisms of conidial development. However, recent studies have shown considerable genome divergence in the fungal kingdom, questioning the general applicability of findings from Aspergillus, and certain longstanding evolutionary theories have been questioned. The phylogenetic distribution of key regulatory elements of asexual reproduction in A. nidulans was investigated in a broad taxonomic range of fungi. This revealed that some proteins were well conserved in the Pezizomycotina (e.g. AbaA, FlbA, FluG, NsdD, MedA, and some velvet proteins), suggesting similar developmental roles. However, other elements (e.g. BrlA) had a more restricted distribution solely in the Eurotiomycetes, and it appears that the genetic control of sporulation seems to be more complex in the aspergilli than in some other taxonomic groups of the Pezizomycotina. The evolution of the velvet protein family is discussed based on the history of expansion and contraction events in the early divergent fungi. Heterologous expression of the A. nidulans abaA gene in Monascus ruber failed to induce development of complete conidiophores as seen in the aspergilli, but did result in increased conidial production. The absence of many components of the asexual developmental pathway from members of the Saccharomycotina supports the hypothesis that differences in the complexity of their spore formation is due in part to the increased diversity of the sporulation machinery evident in the Pezizomycotina. Investigations were also made into the evolution of sex and sexuality in the aspergilli. MAT loci were identified from the heterothallic Aspergillus (Emericella) heterothallicus and Aspergillus (Neosartorya) fennelliae and the homothallic Aspergillus pseudoglaucus (=Eurotium repens). A consistent architecture of the MAT locus was seen in these and other heterothallic aspergilli whereas much variation was seen in the arrangement of MAT loci in homothallic aspergilli. This suggested that it is most likely that the common ancestor of the aspergilli exhibited a heterothallic breeding system. Finally, the supposed prevalence of asexuality in the aspergilli was examined. Investigations were made using A. clavatus as a representative 'asexual' species. It was possible to induce a sexual cycle in A. clavatus given the correct MAT1-1 and MAT1-2 partners and environmental conditions, with recombination confirmed utilising molecular markers. This indicated that sexual reproduction might be possible in many supposedly asexual aspergilli and beyond, providing general insights into the nature of asexuality in fungi.

The Processing Time for Recanalization and Size of Ischemic Lesions on DWI is Related With Complete Reperfusion After Mechanical Thrombectomy.

Recent studies demonstrated that modified thrombolysis in cerebral infarction (TICI) 3 reperfusion have better functional outcomes than modified TICI 2b after mechanical thrombectomy in acute ischemic stroke with large vessel occlusion. The purpose of this study was to determine significant factors to forecast the presence of complete reperfusion after mechanical thrombectomy based on multimodal magnetic resonance imaging (MRI). We investigated 96 consecutive patients with acute large intracranial artery occlusion of anterior circulation who based on multimodal MRI. Also, we compared clinical and radiologic parameters between patients with modified TICI 3 and those with modified TICI 0-2b. Among 96 eligible subjects received mechanical thrombectomy, 39 patients (40.6%) showed complete reperfusion and 57 partial or nonreperfusion (mTICI 2b-26, mTICI 2a-9, mTICI 1-8, and mTICI 0-14) after mechanical thrombectomy. Patients with mTICI 3 had significantly smaller initial Diffusion weighted images (DWI) lesion volume (P < .01) and much shorter time interval from onset to reperfusion (P < .01) than those patients with mTICI (0-2b). In multivariate analysis, smaller initial DWI volume (odds ratio [OR], 1.78; 95% confidence interval [CI], 1.23-2.57; P < .01) and faster reperfusion time (OR, 1.07; 95% CI 1.01-1.14; P = .015) had an independence significance for complete reperfusion after mechanical thrombectomy. In this study, the ischemic lesion volume on DWI and faster processing time are critical factor to predict the state of complete reperfusion after mechanical thrombectomy.

Is calcium phosphate augmentation a viable option for osteoporotic hip fractures?

The use of calcium phosphate bone cement has been described to allow for retention of reduction. Therefore, we evaluated whether augmentation with resorbable calcium phosphate could improve fracture stability in osteoporotic hip fractures. The results showed that augmentation with calcium phosphate cement significantly improved the stability of intertrochanteric fractures. INTRODUCTION: The aim with this study was to measure whether augmentation with resorbable calcium phosphate cement could improve fracture stability in osteoporotic hip fractures. METHODS: We retrospectively reviewed 82 patients who underwent closed reduction and internal fixation with proximal femoral nail (PFN) for unstable intertrochanteric fractures between 2014 and 2017. In 42 of 82 patients, patients were treated with a PFN alone (group I). These patients were compared with 40 patients for whom the same device combined with calcium phosphate cement for augmentation was used (group II). Questionnaire surveys or telephone interviews were conducted and patients completed a self-report Harris hip score (HHS) and visual analog scale (VAS) scores. Radiographic outcomes including mean sliding distance of screw, femoral shortening, and varus collapse were compared. Postoperative complications were compared. RESULTS: Clinical outcomes at 6 months after surgery were equivalent in both groups. Screw sliding, femoral shortening, and varus collapse were all significantly reduced in the cemented group at the last follow-up (p < 0.001, p = 0.005, p < 0.001, respectively). A total of 9 (21%) complications occurred in group I. In contrast, 2 (5%) complications were seen in group II (p = 0.029). CONCLUSIONS: Augmentation with calcium phosphate cement significantly improved the stability of intertrochanteric fractures fixed with a PFN and reduced overall failure rates. We believe augmentation with resorbable calcium phosphate cement for osteoporotic hip fractures is a reasonable option in selected patients.