Photovoltaic Electrochemically Driven Degradation of Calcon Dye with Simultaneous Green Hydrogen Production.

In this study, for the first time, the production of green hydrogen gas (H2) in the cathodic compartment, in concomitance with the electrochemical oxidation (EO) of an aqueous solution containing Calcon dye at the anodic compartment, was studied in a PEM-type electrochemical cell driven by a photovoltaic (PV) energy source. EO of Calcon was carried out on a Nb/BDD anode at different current densities (7.5, 15 and 30 mA cm-2), while a stainless steel (SS) cathode was used for green H2 production. The results of the analysis by UV-vis spectroscopy and total organic carbon (TOC) clearly showed that the electrochemical oxidation (EO) of the Calcon dye after 180 min of electrolysis time by applying 30 mA cm-2 reached up to 90% of degradation and 57% of TOC removal. Meanwhile, under these experimental conditions, a green H2 production greater than 0.9 L was achieved, with a Faradaic efficiency of 98%. The hybrid electrolysis strategy is particularly attractive in the context of a circular economy, as these can be coupled with the use of more complex water matrices to transform organic depollution into an energy resource to produce H2 as a chemical energy carrier.

Removal of herbicide 1-chloro-2,4-dinitrobenzene (DNCB) from aqueous solutions by electrochemical oxidation using boron-doped diamond (BDD) and PbO2 electrodes.

The electrochemical removal of the 1-chloro-2,4-dinitrobenzene (DNCB) herbicide, a potentially carcinogenic agent from aqueous solutions, was performed at PbO2 and BDD electrodes by bulk electrolysis under galvanostatic control (300 and 400 A m-2) and under two pH conditions (3 and 9). Results clearly indicated that a 62 % of mineralization was achieved with BDD anode at pH 3, while only a 46 % of electrochemical oxidation (EO) was achieved at PbO2 electrode. The mineralization current efficiency (MCE) depended on the electrode material, current density, and pH conditions; but, for both PbO2 and BDD, high MCE was achieved at pH 3 and 300 A m-2, obtaining 2.54 % and 1.99 % for BDD and PbO2, respectively. The EO pathway depended on the electrocatalytic properties of each one of the anodes to produce hydroxyl radicals which attacked the DNCB molecule as well as the deactivating effects of the chlorine and nitro groups attached to the aromatic ring on the DNCB structure. Finally, HPLC analyses also showed that phenolic intermediates as well as carboxylic acids were formed, at a different extent, during the electrolysis process on both electrodes.

Applicability of Cork as Novel Modifiers to Develop Electrochemical Sensor for Caffeine Determination.

This study aims to investigate the applicability of a hybrid electrochemical sensor composed of cork and graphite (Gr) for detecting caffeine in aqueous solutions. Raw cork (RAC) and regranulated cork (RGC, obtained by thermal treatment of RAC with steam at 380 °C) were tested as modifiers. The results clearly showed that the cork-graphite sensors, GrRAC and GrRGC, exhibited a linear response over a wide range of caffeine concentration (5-1000 µM), with R2 of 0.99 and 0.98, respectively. The limits of detection (LOD), estimated at 2.9 and 6.1 µM for GrRAC and GrRGC, suggest greater sensitivity and reproducibility than the unmodified conventional graphite sensor. The low-cost cork-graphite sensors were successfully applied in the determination of caffeine in soft drinks and pharmaceutical formulations, presenting well-defined current signals when analyzing real samples. When comparing electrochemical determinations and high performance liquid chromatography measurements, no significant differences were observed (mean accuracy 3.0%), highlighting the potential use of these sensors to determine caffeine in different samples.

Cathodic hydrogen production by simultaneous oxidation of methyl red and 2,4-dichlorophenoxyacetate in aqueous solutions using PbO2, Sb-doped SnO2 and Si/BDD anodes. Part 2: hydrogen production.

In this work, results concerning hydrogen gas production during the oxidation of methyl red (MR) and sodium 2,4-dichlorophenoxyacetate (2,4-DNa), is presented, emphasizing not only the amount of hydrogen gas that was produced but also the kinetic and efficiency parameters involved in this process. For this purpose, a two-compartment electrochemical cell was used with a Nafion® membrane as separator in order to collect H2 without other chemical species (only with traces of water vapor). Under these experimental conditions, it was possible to guarantee the purity of the H2 collected. The electrochemical oxidation of MR and 2,4-DNa solutions was carried out by applying 30 mA cm-2 at 298 K, using different non-active anodes (Si/BDD, Pb/PbO2, or Sb-doped SnO2) and different cathodes (Pt mesh, 316-type stainless-steel, or Pt-10%Rh) in order to investigate the effect of the electrocatalytic materials and experimental conditions. Thus, the H2 produced was measured as a function of the electrolysis time and compared with the values estimated by Faraday's law. The results showed that the hydrogen production rate r(H2) is independent of the nature of the anodic material, although an important effect on the oxygen production was observed on the BDD anode by using sulfuric acid as supporting electrolyte. The effect was discussed through the formation of sulphate-oxidizing species (SO4 -˙ and S2O8 2-) which interfere in the oxygen production step on BDD anodes. The use of different cathodes showed small changes in the hydrogen production rate r(H2), which were basically associated with the differences in hydrogen adsorption energy prior to its evolution. The results were discussed in light of the existing literature.

Cathodic hydrogen production by simultaneous oxidation of methyl red and 2,4-dichlorophenoxyacetate aqueous solutions using Pb/PbO2, Ti/Sb-doped SnO2 and Si/BDD anodes. Part 1: electrochemical oxidation.

In this work, the electrochemical oxidation of the Methyl Red (MR) dye and the herbicide sodium 2,4-dichlorophenoxyacetate (2,4-DNa) was investigated on Si/BDD, Pb/PbO2 and Ti/Sb-doped SnO2 anodes in aqueous acidic medium by applying 30 mA cm-2 at 298 K. The electrochemical experiments were carried out in a two-compartment electrochemical cell separated through a Nafion® membrane (417 type) in order to use two types of supporting electrolyte to measure the elimination of the organic compound, the hydrogen production and the amount of oxygen produced during the oxidation of the pollutants. Although the main goal of this study is to understand the relationship between both processes, the evaluation of the current efficiencies (η) is a key parameter to determine the anodic oxidative capacity to degrade the proposed pollutants. The results clearly showed that MR and 2,4-DNa can be oxidized on Si/BDD, Pb/PbO2 and Ti/Sb-doped SnO2 anodes; however, significant variations in the oxidation level and η are achieved. Thus, although the MR solutions were completely discolored in all cases, only on the Si/BDD anode was MR oxidized to carboxylic acids in less than 15 min of electrolysis time. On Pb/PbO2 and Ti/Sb-doped SnO2 electrodes, the discoloration was slower and the oxidation was quasi-completed, leaving in solution some organic by-products, such as 2-aminobenzoic acid and/or N,N'-dimethyl-p-phenylenediamine, in the fixed electrolysis time. The behavior observed during the elimination of 2,4-DNa is due to its difficulty in degrading the chlorine groups in its aromatic ring which makes 2,4-DNa a more stable molecule. In the first oxidation stage, 2,4-dichlorophenol (2,4-DP) is produced in all cases, but on Si/BDD, this intermediate is quickly consumed. From the polarization curves and Tafel analysis, a reaction scheme for the formation and consumption of 2,4-DP was proposed.

Degradation of 1-hydroxy-2,4-dinitrobenzene from aqueous solutions by electrochemical oxidation: role of anodic material.

Electrochemical oxidation (ECOx) of 1-hydroxy-2,4-dinitrobenzene (or 2,4-dinitrophenol: 2,4-DNP) in aqueous solutions by electrolysis under galvanostatic control was studied at Pb/PbO2, Ti/SnO2, Ti/IrxRuySnO2 and Si/BDD anodes as a function of current density applied. Oxidative degradation of 2,4-DNP has clearly shown that electrode material and the current density applied were important parameters to optimize the oxidation process. It was observed that 2,4-DNP was oxidized at few substrates to CO2 with different results, obtaining good removal efficiencies at Pb/PbO2, Ti/SnO2 and Si/BDD anodes. Trends in degradation way depend on the production of hydroxyl radicals (OH) on these anodic materials, as confirmed in this study. Furthermore, HPLC results suggested that two kinds of intermediates were generated, polyhydroxylated intermediates and carboxylic acids. The formation of these polyhydroxylated intermediates seems to be associated with the denitration step and substitution by OH radicals on aromatic rings, this being the first proposed step in the reaction mechanism. These compounds were successively oxidized, followed by the opening of aromatic rings and the formation of a series of carboxylic acids which were at the end oxidized into CO2 and H2O. On the basis of these information, a reaction scheme was proposed for each type of anode used for 2,4-D oxidation.

Resistance to intestinal coccidiosis following DNA immunization with the cloned 3-1E Eimeria gene plus IL-2, IL-15, and IFN-gamma.

A cloned Eimeria acervulina gene (3-1E) was used to vaccinate chickens in ovo against coccidiosis, both alone and in combination with genes encoding interleukin (IL)-1, IL-2, IL-6, IL-8, IL-15, IL-16, IL-17, IL-18, or interferon (IFN)-gamma. Vaccination efficacy was assessed by increased serum anti-3-1E antibody titers, reduced fecal oocyst shedding, and enhanced body weight gain following experimental infection with E. acervulina. When used alone, anti-3-1E antibody titers were transiently, but reproducibly, increased at 2 wk and 3 wk posthatching in a dose-dependent manner. Similarly, significantly reduced oocyst shedding and increased weight gain were observed at relatively high-dose 3-1E vaccinations (> or =25 microg/egg). Combined immunization with the 3-1E and IL-1, IL-2, IL-15, or IFN-gamma genes induced higher serum antibody responses compared with immunization with 3-1E alone. Following parasite infection, chickens hatched from embryos given the 3-1E gene plus the IL-2 or IL-15 genes displayed significantly reduced oocyst shedding compared with those given 3-1E alone, while 3-1E plus IL-15 or IFN-gamma significantly increased weight gain compared with administration of 3-1E alone. Taken together, these results indicate that in ovo immunization with a recombinant Eimeria gene in conjunction with cytokine adjuvants stimulates protective intestinal immunity against coccidiosis.

Protective immunity against Eimeria acervulina following in ovo immunization with a recombinant subunit vaccine and cytokine genes.

A purified recombinant protein from Eimeria acervulina (3-1E) was used to vaccinate chickens in ovo against coccidiosis both alone and in combination with expression plasmids encoding the interleukin 1 (IL-1), IL-2, IL-6, IL-8, IL-15, IL-16, IL-17, IL-18, or gamma interferon (IFN-gamma) gene. When used alone, vaccination with 100 or 500 mug of 3-1E resulted in significantly decreased oocyst shedding compared with that in nonvaccinated chickens. Simultaneous vaccination of the 3-1E protein with the IL-1, -15, -16, or -17 gene induced higher serum antibody responses than 3-1E alone. To evaluate protective intestinal immunity, vaccinated birds were challenged with live E. acervulina oocysts 14 days posthatch, and fecal-oocyst shedding and body weight gain were determined as parameters of coccidiosis. Chickens vaccinated with 3-1E protein showed significantly lower oocyst shedding and normal body weight gain than nonvaccinated and infected controls. Simultaneous immunization with 3-1E and the IL-2, -15, -17, or -18 or IFN-gamma gene further reduced oocyst shedding compared with that achieved with 3-1E alone. These results provide the first evidence that in ovo vaccination with the recombinant 3-1E Eimeria protein induces protective intestinal immunity against coccidiosis, and this effect was enhanced by coadministration of genes encoding immunity-related cytokines.