High energy density in artificial heterostructures through relaxation time modulation.

Electrostatic capacitors are foundational components of advanced electronics and high-power electrical systems owing to their ultrafast charging-discharging capability. Ferroelectric materials offer high maximum polarization, but high remnant polarization has hindered their effective deployment in energy storage applications. Previous methodologies have encountered problems because of the deteriorated crystallinity of the ferroelectric materials. We introduce an approach to control the relaxation time using two-dimensional (2D) materials while minimizing energy loss by using 2D/3D/2D heterostructures and preserving the crystallinity of ferroelectric 3D materials. Using this approach, we were able to achieve an energy density of 191.7 joules per cubic centimeter with an efficiency greater than 90%. This precise control over relaxation time holds promise for a wide array of applications and has the potential to accelerate the development of highly efficient energy storage systems.

Nonconventional Strain Engineering for Uniform Biaxial Tensile Strain in MoS2 Thin Film Transistors.

Strain engineering has been employed as a crucial technique to enhance the electrical properties of semiconductors, especially in Si transistor technologies. Recent theoretical investigations have suggested that strain engineering can also markedly enhance the carrier mobility of two-dimensional (2D) transition-metal dichalcogenides (TMDs). The conventional methods used in strain engineering for Si and other bulk semiconductors are difficult to adapt to ultrathin 2D TMDs. Here, we report a strain engineering approach to apply the biaxial tensile strain to MoS2. Metal-organic chemical vapour deposition (MOCVD)-grown large-area MoS2 films were transferred onto SiO2/Si substrate, followed by the selective removal of the underneath Si. The release of compressive residual stress in the oxide layer induces strain in MoS2 on top of the SiO2 layer. The amount of strain can be precisely controlled by the thickness of oxide stressors. After the transistors were fabricated with strained MoS2 films, the array of strained transistors was transferred onto plastic substrates. This process ensured that the MoS2 channels maintained a consistent tensile strain value across a large area.

Development of a Gene-Based Soybean-Origin Discrimination Method Using Allele-Specific Polymerase Chain Reaction.

A low soybean self-sufficiency rate in South Korea has caused a high import dependence and considerable price variation between domestic and foreign soybeans, causing the false labeling of foreign soybeans as domestic. Conventional soybean origin discrimination methods prevent a single-grain analysis and rely on the presence or absence of several compounds or concentration differences. This limits the origin discrimination of mixed samples, demonstrating the need for a method that analyzes individual grains. Therefore, we developed a method for origin discrimination using genetic analysis. The whole-genome sequencing data of the Williams 82 reference cultivar and 15 soybean varieties cultivated in South Korea were analyzed to identify the dense variation blocks (dVBs) with a high single-nucleotide polymorphism density. The PCR primers were prepared and validated for the insertion-deletion (InDel) sequences of the dVBs to discriminate each soybean variety. Our method effectively discriminated domestic and foreign soybean varieties, eliminating their false labeling.

Monolithic 3D integration of 2D materials-based electronics towards ultimate edge computing solutions.

Three-dimensional (3D) hetero-integration technology is poised to revolutionize the field of electronics by stacking functional layers vertically, thereby creating novel 3D circuity architectures with high integration density and unparalleled multifunctionality. However, the conventional 3D integration technique involves complex wafer processing and intricate interlayer wiring. Here we demonstrate monolithic 3D integration of two-dimensional, material-based artificial intelligence (AI)-processing hardware with ultimate integrability and multifunctionality. A total of six layers of transistor and memristor arrays were vertically integrated into a 3D nanosystem to perform AI tasks, by peeling and stacking of AI processing layers made from bottom-up synthesized two-dimensional materials. This fully monolithic-3D-integrated AI system substantially reduces processing time, voltage drops, latency and footprint due to its densely packed AI processing layers with dense interlayer connectivity. The successful demonstration of this monolithic-3D-integrated AI system will not only provide a material-level solution for hetero-integration of electronics, but also pave the way for unprecedented multifunctional computing hardware with ultimate parallelism.

Comparing the VITEK 2 ANC card, species-specific PCR, and MALDI-TOF mass spectrometry methods for identification of lactic acid bacteria.

Lactic acid bacteria (LAB) are not only the most common probiotics in the food and feed industry but are also used as plant probiotics. Therefore, precise identification of LAB at the species level is required. In this study, we compared three different methods, the VITEK 2 ANC card, species-specific PCR, and MALDI-TOF MS, to identify six LAB (Lacticaseibacillus casei, Lacticaseibacillus paracasei, Lacticaseibacillus rhamnosus, Lactiplantibacillus plantarum, Lentilactobacillus buchneri, and Limosilactobacillus fermentum) species previously assigned to the genus Lactobacillus that are used as biofertilizers. Twenty-two strains of six LAB species were analyzed using the VITEK 2 ANC card, species-specific PCR, and MALDI-TOF MS, and identification rates at the species level were 45.5%, 95.5%, and 95.5%, respectively. There were cross-reactions between L. casei and L. parpacasei, and one strain of L. casei could not be identified by these three methods. PCR assays and MALDI-TOF MS were applicable for LAB identification. PRACTICAL APPLICATION: LAB are the most common probiotics in the food and feed industry, so precise identification and classification of LAB at the species level are required. This study aimed at comparing three different methods for the effective identification of six LAB species: biochemical testing using VITEK 2 ANC card, species-specific PCR, and MALDI-TOF MS analysis.

Graphene nanopattern as a universal epitaxy platform for single-crystal membrane production and defect reduction.

Heterogeneous integration of single-crystal materials offers great opportunities for advanced device platforms and functional systems1. Although substantial efforts have been made to co-integrate active device layers by heteroepitaxy, the mismatch in lattice polarity and lattice constants has been limiting the quality of the grown materials2. Layer transfer methods as an alternative approach, on the other hand, suffer from the limited availability of transferrable materials and transfer-process-related obstacles3. Here, we introduce graphene nanopatterns as an advanced heterointegration platform that allows the creation of a broad spectrum of freestanding single-crystalline membranes with substantially reduced defects, ranging from non-polar materials to polar materials and from low-bandgap to high-bandgap semiconductors. Additionally, we unveil unique mechanisms to substantially reduce crystallographic defects such as misfit dislocations, threading dislocations and antiphase boundaries in lattice- and polarity-mismatched heteroepitaxial systems, owing to the flexibility and chemical inertness of graphene nanopatterns. More importantly, we develop a comprehensive mechanics theory to precisely guide cracks through the graphene layer, and demonstrate the successful exfoliation of any epitaxial overlayers grown on the graphene nanopatterns. Thus, this approach has the potential to revolutionize the heterogeneous integration of dissimilar materials by widening the choice of materials and offering flexibility in designing heterointegrated systems.

Impact of 2D-3D Heterointerface on Remote Epitaxial Interaction through Graphene.

Remote epitaxy has drawn attention as it offers epitaxy of functional materials that can be released from the substrates with atomic precision, thus enabling production and heterointegration of flexible, transferrable, and stackable freestanding single-crystalline membranes. In addition, the remote interaction of atoms and adatoms through two-dimensional (2D) materials in remote epitaxy allows investigation and utilization of electrical/chemical/physical coupling of bulk (3D) materials via 2D materials (3D-2D-3D coupling). Here, we unveil the respective roles and impacts of the substrate material, graphene, substrate-graphene interface, and epitaxial material for electrostatic coupling of these materials, which governs cohesive ordering and can lead to single-crystal epitaxy in the overlying film. We show that simply coating a graphene layer on wafers does not guarantee successful implementation of remote epitaxy, since atomically precise control of the graphene-coated interface is required, and provides key considerations for maximizing the remote electrostatic interaction between the substrate and adatoms. This was enabled by exploring various material systems and processing conditions, and we demonstrate that the rules of remote epitaxy vary significantly depending on the ionicity of material systems as well as the graphene-substrate interface and the epitaxy environment. The general rule of thumb discovered here enables expanding 3D material libraries that can be stacked in freestanding form.

3D motion tracking display enabled by magneto-interactive electroluminescence.

Development of a human-interactive display enabling the simultaneous sensing, visualisation, and memorisation of a magnetic field remains a challenge. Here we report a skin-patchable magneto-interactive electroluminescent display, which is capable of sensing, visualising, and storing magnetic field information, thereby enabling 3D motion tracking. A magnetic field-dependent conductive gate is employed in an alternating current electroluminescent display, which is used to produce non-volatile and rewritable magnetic field-dependent display. By constructing mechanically flexible arrays of magneto-interactive displays, a spin-patchable and pixelated platform is realised. The magnetic field varying along the z-axis enables the 3D motion tracking (monitoring and memorisation) on 2D pixelated display. This 3D motion tracking display is successfully used as a non-destructive surgery-path guiding, wherein a pathway for a surgical robotic arm with a magnetic probe is visualised and recorded on a display patched on the abdominal skin of a rat, thereby helping the robotic arm to find an optimal pathway.

Epitaxial Growth of Wafer-Scale Molybdenum Disulfide/Graphene Heterostructures by Metal-Organic Vapor-Phase Epitaxy and Their Application in Photodetectors.

Van der Waals heterostructures have attracted increasing interest, owing to the combined benefits of their constituents. These hybrid nanostructures can be realized via epitaxial growth, which offers a promising approach for the controlled synthesis of the desired crystal phase and the interface between van der Waals layers. Here, the epitaxial growth of a continuous molybdenum disulfide (MoS2) film on large-area graphene, which was directly grown on a sapphire substrate, is reported. Interestingly, the grain size of MoS2 grown on graphene increases, whereas that of MoS2 grown on SiO2 decreases with an increasing amount of hydrogen in the chemical vapor deposition reactor. In addition, to achieve the same quality, MoS2 grown on graphene requires a much lower growth temperature (400 °C) than that grown on SiO2 (580 °C). The MoS2/graphene heterostructure that was epitaxially grown on a transparent platform was investigated to explore its photosensing properties and was found to exhibit inverse photoresponse with highly uniform photoresponsivity in the photodetector pixels fabricated across a full wafer. The MoS2/graphene heterostructure exhibited ultrahigh photoresponsivity (4.3 × 104 A W-1) upon exposure to visible light of a wide range of wavelengths, confirming the growth of a high-quality MoS2/graphene heterostructure with a clean interface.

Stretchable Electroluminescent Display Enabled by Graphene-Based Hybrid Electrode.

Stretchable alternating-current electroluminescent (ACEL) devices are required due to their potential in wearable, biomedical, e-skin, robotic, lighting, and display applications; however, one of the main hurdles is to achieve uniform electroluminescence with an optimal combination of transparency, conductivity, and stretchability in electrodes. We therefore propose a fabrication scheme involving strategically combining two-dimensional graphene layers with a silver nanowire (Ag NW)-embedded PEDOT:PSS film. The developed hybrid electrode overcomes the limitations of commonly known metallic NWs and ionic conductor-based electrodes for ACEL applications. Furthermore, the potential of the hybrid electrode is realized in demonstrating large-area stretchable ACEL devices composed of an 8 × 8 passive array. The prototype ACEL passive array demonstrates efficient and uniform electroluminescence under high levels of mechanical deformation such as bending, rolling, twisting, and stretching.

Soy milk digestion extract inhibits progression of prostate cancer cell growth via regulation of prostate cancer­specific antigen and cell cycle-regulatory genes in human LNCaP cancer cells.

Soy milk, which is produced from whole soybeans, contains a variety of biologically active components. Isoflavones are a class of soy-derived phytoestrogens with beneficial effects, among which genistein (GEN) has been previously indicated to reduce the risk of prostate cancer. The present study evaluated the effects of soy milk digestion extract (SMD) on the progression of prostate cancer via the estrogen receptor (ER)ß in human LNCaP prostate cancer cells. To evaluate the effects of SMD (daizein, 1.988 mg/100g, glycitein, 23.537 mg/100 g and GEN, 0.685 mg/100g) on cell proliferation, LNCaP cells were cultured in media containing vehicle (0.1% dimethyl sulfoxide), 17ß­estradiol (E2; 2.7x10­7 mg/ml), GEN (2.7x10-2 mg/ml) of SMD (total aglycon concentration, 0.79 mg/ml), after which the cell viability was examined using an MTT assay. The cell viability was significantly elevated by E2 (by 45±0.18%), while it was markedly reduced by GEN (73.2±0.03%) or SMD (74.8±0.09%). Semi­quantitative reverse transcription polymerase chain reaction analysis was performed to assess the mRNA expression levels of target genes, including ERß, prostate cancer­specific antigen (PSA) and cell cycle regulators p21, Cyclin D1 and cyclin-dependent kinase (CDK)4. The expression of ERß was almost completely diminished by E2, whereas it was significantly elevated by SMD. In addition, the expression levels of PSA were considerably reduced by SMD. The expression of p21 was significantly elevated by SMD, while it was markedly reduced by E2. Of note, the expression levels of Cyclin D1 and CDK4 were considerably elevated by E2, while being significantly reduced by GEN and SMD. All of these results indicated that SMD may inhibit the proliferation of human prostate cancer cells via regulating the expression of ERß, PSA, p21, Cyclin D1 and CDK4 in an ER-dependent manner.