Catalyst Supraparticles: Tuning the Structure of Spray-Dried Pt/SiO2 Supraparticles via Salt-Based Colloidal Manipulation to Control their Catalytic Performance.

The structure of supraparticles (SPs) is a key parameter for achieving advanced functionalities arising from the combination of different nanoparticle (NP) types in one hierarchical entity. However, whenever a droplet-assisted forced assembly approach is used, e.g., spray-drying, the achievable structure is limited by the inherent drying phenomena of the method. In particular, mixed NP dispersions of differently sized colloids are heavily affected by segregation during the assembly. Herein, the influence of the colloidal arrangement of Pt and SiO2 NPs within a single supraparticulate entity is investigated. A salt-based electrostatic manipulation approach of the utilized NPs is proposed to customize the structure of spray-dried Pt/SiO2 SPs. By this, size-dependent separation phenomena of NPs during solvent evaporation, that limit the catalytic performance in the reduction of 4-nitrophenol, are overcome by achieving even Pt NP distribution. Additionally, the textural properties (pore size and distribution) of the SiO2 pore framework are altered to improve the mass transfer within the material leading to increased catalytic activity. The suggested strategy demonstrates a powerful, material-independent, and universally applicable approach to deliberately customize the structure and functionality of multi-component SP systems. This opens up new ways of colloidal material combinations and structural designs in droplet-assisted forced assembly approaches like spray-drying.

Polymer-acid-metal quasi-ohmic contact for stable perovskite solar cells beyond a 20,000-hour extrapolated lifetime.

The development of a robust quasi-ohmic contact with minimal resistance, good stability and cost-effectiveness is crucial for perovskite solar cells. We introduce a generic approach featuring a Lewis-acid layer sandwiched between dopant-free semicrystalline polymer and metal electrode in perovskite solar cells, resulting in an ideal quasi-ohmic contact even at elevated temperature up to 85 °C. The solubility of Lewis acid in alcohol facilitates nondestructive solution processing on top of polymer, which boosts hole injection from polymer into metal by two orders of magnitude. By integrating the polymer-acid-metal structure into solar cells, devices exhibit remarkable resilience, retaining 96% ± 3%, 96% ± 2% and 75% ± 7% of their initial efficiencies after continuous operation in nitrogen at 35 °C for 2212 h, 55 °C for 1650 h and 85 °C for 937 h, respectively. Leveraging the Arrhenius relation, we project an impressive T80 lifetime of 26,126 h at 30 °C.

Preparation of atom probe tips from (nano)particles in dispersion using (di)electrophoresis and electroplating.

The behavior of catalytic particles depends on their chemical structure and morphology. To reveal this information, the characterization with atom probe tomography has huge potential. Despite progresses and papers proposing various approaches towards the incorporation of particles inside atom probe tips, no single approach has been broadly applicable to date. In this paper, we introduce a workflow that allowed us to prepare atom probe specimens from Ga particles in suspension in the size range of 50 nm up to 2 µm. By combining dielectrophoresis and electrodeposition in a suitable way, we achieve a near-tip shape geometry, without a time-consuming FIB lift-out. This workflow is a simple and quick method to prepare atom probe tips and allows for a high preparation throughput. Also, not using a lift-out allowed us to use a cryo-stage, avoiding melting of the Ga particles, while ensuring a mechanical stable atom probe tip. The specimen prepared by this workflow enable a stable measurement and low fracture rates. RESEARCH HIGHLIGHTS: Enabling cryo-preparation of (nano)particles for the atom probe. Characterization of surface and bulk elemental distribution of GaPt model SCALMS.

Synergistic Combination of Reductive Covalent Functionalization and Atomic Layer Deposition-Towards Spatially Defined Graphene-Organic-Inorganic Heterostructures.

Three-dimensionally (3D) well-ordered and highly integrated graphene hybrid architectures are considered to be next-generation multifunctional graphene materials but still remain elusive. Here, we report the first realization of unprecedented 3D-patterned graphene nano-ensembles composed of a graphene monolayer, a tailor-made structured organophenyl layer, and three metal oxide films, providing the first example of such a hybrid nano-architecture. These spatially resolved and hierarchically structured quinary hybrids are generated via a two-dimensional (2D)-functionalization-mediated atomic layer deposition growth process, involving an initial lateral molecular programming of the graphene lattice via lithography-assisted 2D functionalization and a subsequent stepwise molecular assembly in these regions in the z-direction. Our breakthrough lays the foundation for the construction of emerging 3D-patterned graphene heterostructures.

The H-D-isotope effect of heavy water affecting ligand-mediated nanoparticle formation in SANS and NMR experiments.

An isotopic effect of normal (H2O) vs. heavy water (D2O) is well known to fundamentally affect the structure and chemical properties of proteins, for instance. Here, we correlate the results from small angle X-ray and neutron scattering (SAXS, SANS) with high-resolution scanning transmission electron microscopy to track the evolution of CdS nanoparticle size and crystallinity from aqueous solution in the presence of the organic ligand ethylenediaminetetraacetate (EDTA) at room temperature in both H2O and D2O. We provide evidence via SANS experiments that exchanging H2O with D2O impacts nanoparticle formation by changing the equilibria and dynamics of EDTA clusters in solution as investigated by nuclear magnetic resonance analysis. The colloidal stability of the CdS nanoparticles, covered by a layer of [Cd(EDTA)]2- complexes, is significantly reduced in D2O despite the strong stabilizing effect of EDTA in suspensions of normal water. Hence, conclusions about nanoparticle formation mechanisms from D2O solutions reveal limited transferability to reactions in normal water due to isotopic effects, which thus need to be discussed for contrast match experiments.

AgIn5S8/ZnS Quantum Dots for Luminescent Down-Shifting and Antireflective Layer in Enhancing Photovoltaic Performance.

Colloidal AgIn5S8/ZnS quantum dots (QDs) have recently emerged as a promising, efficient, nontoxic, down-shifting material in optoelectronic devices. These QDs exhibit a high photoluminescent quantum yield and offer a range of potential applications, specifically in the field of photovoltaics (PVs) for light management. In this work, we report an eco-friendly method to synthesize AgIn5S8/ZnS QDs and deposit them on commercial silicon solar cells (with an active area of 7.5 cm2), with which the short-circuit current (JSC) enhanced by 1.44% and hence the power conversion efficiency by 2.51%. The enhancements in PV performance are mainly attributable to the improved external quantum efficiency in the ultraviolet region and reduced surface reflectance in the ultraviolet and near-infrared regions. We study the effect of QD concentration on the bifunctions of downshifting and antireflection. The optimal 15 mg/mL QDs blade-coated onto the Si solar cells realize maximum current generation as the reflectance loss in the visible wavelength is compensated by the minimized reflection in the near-infrared region.

A Sustainable Method for Removal of the Full Range of Liquid and Solid Hydrocarbons from Water Including Up- and Recycling.

Beyond their CO2 emittance when burned as fuels, hydrocarbons (HCs) serve as omnipresent raw materials and commodities. No matter if as liquid oil spills or the endless amounts of plastic roaming the oceans, HCs behave as persistent pollutants with water as main carrier to distribute. Even if their general chemical structure [-(CH2 )n -] is quite simple, the endless range of n leads to contaminations of different appearances and properties. A water remediation method based on superparamagnetic iron oxide nanoparticles (SPIONs) modified with self-assembled monolayers of alkyl phosphonic acid derivatives is presented. These molecules enable the SPIONs to non-covalently bind HCs, independently from the molecular weight, size and morphology. The attractive interaction is mainly based on hydrophobic and Coulomb interaction, which allows recycling of the SPIONs. The superparamagnetic core allows a simple magnetic collection and separation from the water phase which makes it a promising addition to wastewater treatment. Agglomerates of collected plastic "waste" even exhibit superior adsorption properties for crude oil, another hydrocarbon waste which gives these collected wastes a second life. This upcycling approach combined with presented recycling methods enables a complete recycling loop.

Fast Gas-Adsorption Kinetics in Supraparticle-Based MOF Packings with Hierarchical Porosity.

Metal-organic frameworks (MOFs) are microporous adsorbents for high-throughput gas separation. Such materials exhibit distinct adsorption characteristics owing to the flexibility of the crystal framework in a nanoparticle, which can be different from its bulk crystal. However, for practical applications, such particles need to be compacted into macroscopic pellets, creating mass-transport limitations. In this work, this problem is addressed by forming materials with structural hierarchy, using a supraparticle-based approach. Spherical supraparticles composed of nanosized MOF particles are fabricated by emulsion templating and they are used as the structural component forming a macroscopic material. Zeolitic imidazolate framework-8 (ZIF-8) particles are used as a model system and the gas-adsorption kinetics of the hierarchical material are compared with conventional pellets without structural hierarchy. It is demonstrated that a pellet packed with supraparticles exhibits a 30 times faster adsorption rate compared to an unstructured ZIF-8 powder pellet. These results underline the importance of controlling structural hierarchy to maximize the performance of existing materials. In the hierarchical MOFs, large macropores between the supraparticles, smaller macropores between individual ZIF-8 primary particles, and micropores inherent to the ZIF-8 framework collude to combine large surface area, defined adsorption sites, and efficient mass transport to enhance performance.

Supraparticles on beads for supported catalytically active liquid metal solutions - the SCALMS suprabead concept.

A novel GaPt-based supported catalytically active liquid metal solution (SCALMS) material is developed by exploiting the suprabead concept: Supraparticles, i.e. micrometer-sized particles composed of nanoparticles assembled by spray-drying, are bonded to millimeter-sized beads. The suprabeads combine macroscale size with catalytic properties of nanoscale GaPt particles entrapped in their silica framework.

Controlled Self-Assembly of Gold Nanotetrahedra into Quasicrystals and Complex Periodic Supracrystals.

The self-assembly of shape-anisotropic nanocrystals into large-scale structures is a versatile and scalable approach to creating multifunctional materials. The tetrahedral geometry is ubiquitous in natural and manmade materials, yet regular tetrahedra present a formidable challenge in understanding their self-assembly behavior as they do not tile space. Here, we report diverse supracrystals from gold nanotetrahedra including the quasicrystal (QC) and the dimer packing predicted more than a decade ago and hitherto unknown phases. We solve the complex three-dimensional (3D) structure of the QC by a combination of electron microscopy, tomography, and synchrotron X-ray scattering. Nanotetrahedron vertex sharpness, surface ligands, and assembly conditions work in concert to regulate supracrystal structure. We also discover that the surface curvature of supracrystals can induce structural changes of the QC tiling and eventually, for small supracrystals with high curvature, stabilize a hexagonal approximant. Our findings bridge the gap between computational design and experimental realization of soft matter assemblies and demonstrate the importance of accurate control over nanocrystal attributes and the assembly conditions to realize increasingly complex nanopolyhedron supracrystals.

Early-stage bifurcation of crystallization in a sphere.

Bifurcations in kinetic pathways decide the evolution of a system. An example is crystallization, in which the thermodynamically stable polymorph may not form due to kinetic hindrance. Here, we use confined self-assembly to investigate the interplay of thermodynamics and kinetics in the crystallization pathways of finite clusters. We report the observation of decahedral clusters from colloidal particles in emulsion droplets and show that these decahedral clusters can be thermodynamically stable, just like icosahedral clusters. Our hard sphere simulations reveal how the development of the early nucleus shape passes through a bifurcation that decides the cluster symmetry. A geometric argument explains why decahedral clusters are kinetically hindered and why icosahedral clusters can be dominant even if they are not in the thermodynamic ground state.

Polythiophene as a Double-Electrostatic Template for Zinc Oxide and Gold: Multicomponent Nano-Objects for Enhanced Photocatalysis.

Using electrostatic self-assembly and electrostatic nanotemplating, a quaternary nanostructured system consisting of zinc oxide nanoparticles, gold nanoparticles, poly[3-(potassium-4-butanoate)thiophene-2,5-diyl] (PT), and methyltrioctylammonium chloride (MTOA) (PT-MTOA-ZnO-Au) was designed for aqueous photocatalysis. The PT-MTOA hollow sphere aggregates served as an electrostatic template for both individual inorganic nanoparticles controlling their morphology, stabilizing the nanoparticles, and acting as a photosensitizer. The hybrid structures included spherical ZnO nanoparticles with a diameter of d = 2.6 nm and spherical Au nanoparticles with d = 6.0 nm embedded in PT-MTOA hollow spheres with a hydrodynamic radius of RH = 100 nm. The ZnO nanoparticles acted as the main catalyst, while the Au nanoparticles acted as the cocatalyst. As a photocatalytic model reaction, the dye degradation of methylene blue in aqueous solution using the full spectral range from UV to visible light was tested. The photocatalytic activity was optimized by varying the Zn and Au loading ratios and was substantially enhanced regarding the components; for example, it was increased by about 61% using PT-MTOA-ZnO-Au compared to the composite without gold particles. A photocatalytic mechanism of the methylene blue degradation was proposed when catalyzed by these multicomponent nano-objects. Thus, a simple procedure of templating two different nanoparticle species within the same cocatalytically active template has been demonstrated, which can be extended to other inorganic particles, making a variety of task-specific catalysts accessible.

Highly Localized Optical Field Enhancement at Neon Ion Sputtered Tungsten Nanotips.

We present laser-driven rescattering of electrons at a nanometric protrusion (nanotip), which is fabricated with an in situ neon ion sputtering technique applied to a tungsten needle tip. Electron energy spectra obtained before and after the sputtering show rescattering features, such as a plateau and high-energy cutoff. Extracting the optical near-field enhancement in both cases, we observe a strong increase of more than 2-fold for the nanotip. Accompanying finite-difference time-domain (FDTD) simulations show a good match with the experimentally extracted near-field strengths. Additionally, high electric field localization for the nanotip is found. The combination of transmission electron microscope imaging of such nanotips and the determination of the near-field enhancement by electron rescattering represent a full characterization of the electric near-field of these intriguing electron emitters. Ultimately, nanotips as small as single nanometers can be produced, which is of utmost interest for electron diffraction experiments and low-emittance electron sources.

Hexagonal Hybrid Bismuthene by Molecular Interface Engineering.

High-quality devices based on layered heterostructures are typically built from materials obtained by complex solid-state physical approaches or laborious mechanical exfoliation and transfer. Meanwhile, wet-chemically synthesized materials commonly suffer from surface residuals and intrinsic defects. Here, we synthesize using an unprecedented colloidal photocatalyzed, one-pot redox reaction a few-layers bismuth hybrid of "electronic grade" structural quality. Intriguingly, the material presents a sulfur-alkyl-functionalized reconstructed surface that prevents it from oxidation and leads to a tuned electronic structure that results from the altered arrangement of the surface. The metallic behavior of the hybrid is supported by ab initio predictions and room temperature transport measurements of individual nanoflakes. Our findings indicate how surface reconstructions in two-dimensional (2D) systems can promote unexpected properties that can pave the way to new functionalities and devices. Moreover, this scalable synthetic process opens new avenues for applications in plasmonics or electronic (and spintronic) device fabrication. Beyond electronics, this 2D hybrid material may be of interest in organic catalysis, biomedicine, or energy storage and conversion.

Magnetic in situ determination of surface coordination motifs by utilizing the degree of particle agglomeration.

Most analytical techniques used to study the surface chemical properties of superparamagnetic iron oxide nanoparticles (SPIONs) are barely suitable for in situ investigations in liquids, where SPIONs are mostly applied for hyperthermia therapy, diagnostic biosensing, magnetic particle imaging or water purification. Magnetic particle spectroscopy (MPS) can resolve changes in magnetic interactions of SPIONs within seconds at ambient conditions. Herein, we show that by adding mono- and divalent cations to citric acid capped SPIONs, the degree of agglomeration can be utilized to study the selectivity of cations towards surface coordination motifs via MPS. A favored chelate agent, like ethylenediaminetetraacetic acid (EDTA) for divalent cations, removes cations from coordination sites on the SPION surface and causes redispersion of agglomerates. The magnetic determination thereof represents what we call a "magnetically indicated complexometric titration". The relevance of agglomerate sizes for the MPS signal response is studied on a model system of SPIONs and the surfactant cetrimonium bromide (CTAB). Analytical ultracentrifugation (AUC) and cryogenic transmission electron microscopy (cryo-TEM) reveal that large micron-sized agglomerates are required to significantly change the MPS signal response. With this work, a fast and easy-to-use characterization method to determine surface coordination motifs of magnetic nanoparticles in optically dense media is demonstrated.