Effects of 445-nm Diode Laser-Assisted Debonding of Metallic Brackets on Shear Bond Strength and Enamel Surface Morphology.

Objective: To evaluate the effect of a 445-nm diode laser on the shear bond strength (SBS) of metallic brackets before debonding. Background: Due to the new blue laser technology, very few studies are available in this context. Methods: Seventy metallic brackets (Discovery; Dentaurum, Ispringen, Germany) were bonded to the frontal enamel surfaces of 70 caries-free bovine incisors in a standardized way. Each sample was randomly assigned to the control or laser group, with 35 samples per group. The brackets in the laser group were irradiated with the diode laser (SIROLaser Blue®; Sirona, Bensheim, Germany) on three sides of the bracket bases for 5 s each (lateral-coronal-lateral, a total of 15 s) immediately before debonding. SBS values were evaluated for the control group and laser group. Micrographs of the enamel surface were taken with 10 × magnification to assess the adhesive remnant index (ARI) and the degree of enamel fractures after debonding. Results: There were no statistically significant differences in SBS in the laser group in comparison with the control group (p > 0.05). The distribution of ARI scores was also not statistically significantly different in the laser group in comparison with the control group (p > 0.05). Three enamel fractures occurred in the control group and one in the laser group after debonding. Conclusions: Irradiation of metallic brackets with the 445-nm diode laser before debonding does not significantly reduce the SBS values and does not influence the remaining amount of adhesive on the enamel surface. The risk of enamel fractures during debonding is therefore not clinically affected.

Microcrack Analysis of Dental Hard Tissue After Root Canal Irradiation with a 970-nm Diode Laser.

OBJECTIVES: The aim of the present study was to investigate differences in the amount of dentin microcracking caused by the use of a 970-nm diode laser with different parameters for endodontic disinfection procedures. MATERIALS AND METHODS: Forty dental roots underwent mechanical endodontic preparation in a standardized manner. Each sample was randomly allocated to 4 groups receiving constant or interval laser irradiation time, calcium hydroxide disinfection, or a control group, with 10 samples per group. Transmission microscopy of all samples was performed at T0, before preparation; T1, immediately after endodontic preparation; and T2, after laser application in the laser groups and after 1 week of storage in the control and calcium hydroxide groups. The microcracks at each measurement point were color labeled, layered, and compared. RESULTS: No significant differences were noted at T0 and T1 (p > 0.05). Statistically significant differences in the overall amount of microcracking were observed between the constant laser group and all other groups at T2 (p < 0.05). There were no statistically significant differences between the interval laser group, the calcium hydroxide group, and the control group at T2 in relation to the overall amount of microcracking (p > 0.05). When the root sections were analyzed separately, the coronal section did not show any statistically significant differences between the constant laser and interval laser groups (p > 0.05). The middle and apical root sections in the constant laser group showed the significantly largest amount of crack formation in comparison with the other groups (p < 0.05). The statistically significantly smallest amount of crack formation was observed in the apical third for all groups (p < 0.05). CONCLUSIONS: Clinically proposed laser protocol seems to be able to prevent side effects to the tissue, such as microcracks of the root canal dentine.

Influence on interradicular bone volume of Invisalign treatment for adult crowding with interproximal enamel reduction: a retrospective three-dimensional cone-beam computed tomography study.

BACKGROUND: The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding, using Invisalign aligner and interproximal enamel reduction (IER), and changes in the volume of interradicular bone. METHODS: A total of 60 cone-beam computed tomography (CBCT) scans from 30 adult patients (28 women, two men; 30 CBCTs pre-treatment, 30 post-treatment) were examined retrospectively in order to measure bone volume three-dimensionally. The patients' average age was 36.03 ± 9.7 years. The interradicular bone volume was measured with OsiriX at four levels in the anterior tooth areas of the maxilla and mandible. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. RESULTS: Overall, a slight increase in the quantity of bone was found (0.12 ± 0.73 mm). There was a highly significant increase in bone in the mandible (0.40 ± 0.62 mm; P <  0.001), while in the maxilla there was a slight loss of bone, which was highly significant in the apical third (- 0.16 ± 0.77 mm; P = 0.001). CONCLUSIONS: Overall, treatment for adult crowding using an aligner and IER appears to have a positive effect on interradicular bone volume, particularly in patients with severe grades of the condition (periodontally high-risk dentition). This effect is apparently independent of IER. This is extremely important with regard to the treatment outcome, since IER and root proximity have been matters of debate in the literature and teeth should remain firmly embedded in their alveolar sockets.

Influence of Photobiomodulation Therapy on Gingivitis Induced by Multi-Bracket Appliances: A Split-Mouth Randomized Controlled Trial.

OBJECTIVE: The objective of this split-mouth trial was to investigate the influence of photobiomodulation therapy (PBMT) on adjuvant treatment of gingivitis induced by multi-bracket appliances, after bracket debonding and professional tooth cleaning. MATERIALS AND METHODS: Thirteen patients (mean age 16.15 years; standard deviation ±2.12 years) who had completed active orthodontic treatment with fixed orthodontic appliances in an orthodontic clinic were included on a randomized basis. At time point T0, after bracket debonding and professional tooth cleaning, the papilla bleeding index (PBI) and bleeding on probing (BOP) were assessed in the upper jaw by the blinded investigator (M.S.), who was not aware at any time of which quadrant received PBMT. The study was based on a patient-blinded split-mouth design. In each patient, PBMT was administered by a practitioner (S.S.) in one upper quadrant (wavelength: 660 nm; Power: 100 mW; Power density: 100 mW/cm2; Energy density per application point = 2 J/cm2; Energy per application point = 2 J; Total dose = 52 J/cm2; Total energy = 52 J; Irradiation time: 26 × 20 sec), while the other upper quadrant received a simulated laser application with the laser system turned off. Randomized equal allocation of the sides was accomplished. The second PBI and BOP assessment followed 4-6 days after laser irradiation (T1) by M.S. RESULTS: No statistical differences were observed between the sides with regard to PBI and BOP values at T0 (p > 0.05). The PBI and BOP values decreased significantly between T0 and T1 on both sides (p < 0.05). At T1, the PBI and BOP values were significantly lower in the laser side in comparison with the control side (p < 0.05). CONCLUSIONS: On the basis of these results and study parameters, adjuvant PBMT is able to accelerate the healing process in patients with gingivitis induced by multi-bracket appliances.

Intrapulpal Temperature Increases Caused by 445-nm Diode Laser-Assisted Debonding of Self-Ligating Ceramic Brackets During Simulated Pulpal Fluid Circulation.

OBJECTIVE: This study investigated temperature increases in dental pulp resulting from laser-assisted debonding of ceramic brackets using a 445-nm diode laser. MATERIALS AND METHODS: Eighteen ceramic brackets were bonded in standardized manner to 18 caries-free human third molars. Pulpal fluid circulation was simulated by pumping distilled water at 37°C through the pulp chamber. The brackets were irradiated with a 445-nm diode laser. Temperatures were measured using a thermal camera at points P1 (center of the pulp) and P2 (in the hard dental tissue) at the baseline (T0), at the start and end of laser application (T1 and T2), and the maximum during the sequence (Tmax). RESULTS: Significant differences in the temperatures measured at P1 and P2 were observed among T0, T1, T2, and Tmax. Significant increases in temperature were noted at points P1 and P2, between T1 and T2, T1 and Tmax, and T2 and Tmax. The maximum P2 values were significantly higher than at P1. The maximum temperature increase measured in the pulp was 2.23°C, lower than the critical threshold of 5.5°C. CONCLUSIONS: On the basis of the laser settings used, there is no risk to the vitality of dental pulp during laser-assisted debonding of ceramic brackets with a 445-nm diode laser.

Effects of 445-nm Diode Laser-Assisted Debonding of Self-Ligating Ceramic Brackets on Shear Bond Strength.

OBJECTIVE: The aim of this study was to measure the effect of irradiation with a novel 445-nm diode laser on the shear bond strength (SBS) of ceramic brackets before debonding. MATERIALS AND METHODS: Thirty ceramic brackets (In-Ovation® C, GAC) were bonded in standard manner to the planed and polished buccal enamel surfaces of 30 caries-free human third molars. Each tooth was randomly allocated to the laser or control group, with 15 samples per group. The brackets in the laser group were irradiated with the diode laser (SIROLaser Blue®; Sirona) on three sides of the bracket bases for 5 sec each (lateral-coronal-lateral, a total of 15 sec) immediately before debonding. SBS values were measured for the laser group and control group. To assess the adhesive remnant index (ARI) and the degree of enamel fractures, micrographs of the enamel surface were taken with 10-fold magnification after debonding. RESULTS: The SBS values were significantly lower statistically in the laser group in comparison with the control group (p < 0.05). The ARI scores were also significantly lower statistically in the laser group in comparison with the control group (p < 0.05). No bracket fractures or enamel fractures occurred in either group after debonding. CONCLUSIONS: Irradiation of ceramic brackets with the novel diode laser before debonding significantly reduces the SBS values. This is of clinical importance, as it means that the risk of damage to the teeth, bracket fractures, and the overall treatment time can be reduced.

445-nm diode laser-assisted debonding of self-ligating ceramic brackets.

OBJECTIVES: This study determined the influence of irradiation on aesthetic ceramic brackets with a novel 445-nm diode laser prior to debonding on the bracket failure mode. MATERIALS AND METHODS: Thirty ceramic brackets (In-Ovation® C, GAC) were standard-bonded to the oral and buccal planed and polished enamel surfaces of 15 caries-free human 3rd molars. Prior to study-blinded debonding, the brackets in the laser group were irradiated with the diode laser (SIROLaser Blue®, Sirona), while the irradiation was simulated within the conventional group. To determine the degree of enamel fractures and the adhesive remnant index (ARI) before debonding (T0), after debonding (T1) and after removal of the remaining composite using a rotating fraise (red ring, Comet) (T2), micrographs of the enamel surface at 10-fold and 20-fold magnifications were taken. Additionally, the enamel surface was investigated using seven randomly chosen samples from each group at every time point by SEM at 200-fold and 500-fold magnifications. RESULTS: In the laser group, the ARI-score was statistically significantly reduced (p<0.05) at 10-fold and 20-fold magnifications compared to the conventional group, while enamel fractures were not found at any magnification in either group at T1. Enamel fractures and grinding marks were increasingly found in the conventional group by SEM at T2. CONCLUSION: Irradiation with the novel diode laser prior to debonding of ceramic brackets significantly changes bonding failure in terms of less remaining adhesive. This is of clinical importance as the risk of enamel fractures and chair time can be reduced.

Internal derangement in the temporomandibular joint of juveniles with clinical signs of TMD : MRI-assessed association with skeletal and dental classes.

AIM: The aim of this study was to investigate possible correlation of specific skeletal or dental class in children and adolescents with clinical signs of temporomandibular dysfunction (TMD) with the severity of internal derangement (ID) of the temporomandibular joint. MATERIALS AND METHODS: Based on MRI images, the ID of 232 juvenile temporomandibular joints in 116 patients were retrospectively recorded. The distribution of the ID stages within the skeletal and dental classes was compared by means of the χ 2 test. RESULTS: Excluding the comparison between skeletal Class I (S I) and skeletal Class II (S II; p < 0.05), no statistically significant differences in the distribution of the ID stages were found between the skeletal classes (p > 0.05). No statistically significant differences were found when comparing the distribution of the ID stages between the dental classes (p > 0.05). CONCLUSION: According to these findings, there is no skeletal or dental class that is related to higher degrees of internal derangement in the TMJs of children and adolescents presenting clinical signs of TMD. Therefore, it is not possible to draw conclusions about the severity of the ID in relation to the dental and skeletal class in symptomatic juvenile TMJs.

Shear Bond Strength of Three Orthodontic Bonding Systems on Enamel and Restorative Materials.

Objective. The aim of this in vitro study was to determine the shear bond strength (SBS) and adhesive remnant index (ARI) score of two self-etching no-mix adhesives (iBond™ and Scotchbond™) on different prosthetic surfaces and enamel, in comparison with the commonly used total etch system Transbond XT™. Materials and Methods. A total of 270 surfaces (1 enamel and 8 restorative surfaces, n = 30) were randomly divided into three adhesive groups. In group 1 (control) brackets were bonded with Transbond XT primer. In the experimental groups iBond adhesive (group 2) and Scotchbond Universal adhesive (group 3) were used. The SBS was measured using a Zwicki 1120™ testing machine. The ARI and SBS were compared statistically using the Kruskal-Wallis test (P ≤ 0.05). Results. Significant differences in SBS and ARI were found between the control group and experimental groups. Conclusions. Transbond XT showed the highest SBS on human enamel. Scotchbond Universal on average provides the best bonding on all other types of surface (metal, composite, and porcelain), with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures on restorative materials in patients. If metal brackets have to be bonded to a metal surface, the use of a dual-curing resin is recommended.

Influence of Invisalign treatment with interproximal enamel reduction (IER) on bone volume for adult crowding: a retrospective three-dimensional cone beam computed tomography study.

BACKGROUND: The aim of this study was to use three-dimensional datasets to identify associations between treatment for adult crowding using Invisalign and interproximal enamel reduction (IER) and changes in the bone volume. METHODS: A total of 60 digital cone beam computed tomography (CBCT) scans from 30 patients (28 women, two men; 30 CBCTs pretreatment, 30 posttreatment) were examined retrospectively in order to record bone volume three-dimensionally before and after treatment. The patients' average age was 36.03 ± 9.7 years. The data were collected and analyzed using the computer programs Mimics 15.0 and OsiriX. Differences in bone between T0 and T1 were analyzed with IBM SPSS 21.0 using the Wilcoxon test for paired samples. RESULTS: Analysis of the orovestibular bone volume showed highly significant changes (bone change P <0.001) only in the mandible where more expansion of the dental arch was carried out using proclination or protrusion. The bone lamella was thinner buccally and thicker lingually. In general, bone increases in the oral direction were slightly greater than bone losses in the vestibular direction. No significant changes were detected in the maxilla (bone change P = 0.13). Significant vertical bone loss in the bone height was detected in both the maxilla and the mandible. The largest bone loss was observed in the vestibular direction in the mandible, at a high level of significance (P <0.001). CONCLUSIONS: Particularly in the mandible, therapeutic reduction of the vertical and sagittal bone volume shows that caution should be used in the treatment of tertiary crowding with proclination and expansion. The cortical walls appear to represent the limits for orthodontic tooth movement, at least in adult female patients.

Enamel shear bond strength of two orthodontic self-etching bonding systems compared to Transbond™ XT.

OBJECTIVE: The aim of this in vitro study was to compare the shear bond strength (SBS) and Adhesive Remnant Index (ARI) scores of two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances to the commonly used total etch system Transbond XT™ (in combination with phosphoric acid). MATERIALS AND METHODS: In all, 60 human premolars were randomly divided into three groups of 20 specimens each. In group 1 (control), brackets were bonded with Transbond™ XT primer. Prompt L-Pop™ (group 2) and Scotchbond™ Universal (group 3) were used in the experimental groups. Lower premolar brackets were bonded by light curing the adhesive. After 24 h of storage, the shear bond strength (SBS) was measured using a Zwicki 1120 testing machine. The adhesive remnant index (ARI) was determined under 10× magnification. The Kruskal-Wallis test was used to statistically compare the SBS and the ARI scores. RESULTS: No significant differences in the SBS between any of the experimental groups were detected (group 1: 15.49 ± 3.28 MPa; group 2: 13.89 ± 4.95 MPa; group 3: 14.35 ± 3.56 MPa; p = 0.489), nor were there any significant differences in the ARI scores (p = 0.368). CONCLUSIONS: Using the two self-etching no-mix adhesives (Prompt L-Pop™ and Scotchbond™) for orthodontic appliances does not affect either the SBS or ARI scores in comparison with the commonly used total-etch system Transbond™ XT. In addition, Scotchbond™ Universal supports bonding on all types of surfaces (enamel, metal, composite, and porcelain) with no need for additional primers. It might therefore be helpful for simplifying bonding in orthodontic procedures.

Shear bond strength and debonding characteristics of a new premixed self-etching with a reference total-etch adhesive.

BACKGROUND: To determine the shear bond strength and adhesive remnant index of a new premixed self-etching primer and adhesive (Tectosan, BonaDent, Germany) for orthodontic appliances in comparison to a reference total-etch system Transbond XT. METHODS: Bovine incisors were embedded in resin and randomly divided into two groups of 16 samples each. Brackets (Discovery, Dentaurum, Germany) were bonded in group 1 (total-etch-system, Transbond XT) and in group 2 (self-etch-system, Tectosan) with curing light for 40 s. Shear bonding strengths were measured after 24 h of storage in distilled water at 37 °C with a Zwicki 1120 testing machine (Zwick Roell, Germany). A force was applied on the bracket base at the wings in occluso-gingival direction. Then the adhesive remnant index (ARI) was determined. RESULTS: No statistical differences on SBS were found for both bonding agents (p = 0.63). ARI scores however differed statistically significantly (p = 0.035): in the total-etch group more adhesive remained on the teeth, whereas in the self-etch group more adhesive remained on the brackets. There were no visible enamel damages in both groups. CONCLUSIONS: No differences in the shear bond strength were found between both bonding agents. In our study the self-etch-system shifted the adhesive remnant index from more adhesive on the teeth to more adhesive on the bracket - as other already published self-etch systems did - with the new benefit of not increased enamel damages. Tectosan might therefore be a promising alternative to adhesive systems.

Pain reduced by low-level laser therapy during use of orthodontic separators in early mixed dentition.

OBJECTIVE: The purpose of this work was to investigate whether low-level laser therapy (LLLT) applied at a defined distance from the gingiva has a pain-reducing effect in young patients undergoing orthodontic separation during the early mixed-dentition stage. MATERIALS AND METHODS: A total of 40 children in early mixed dentition (mean age 8.05 years) who required separation of molars were included. The study comprised a group of 20 patients whose treatment included laser application on the day of separation and a control group of 20 patients not receiving LLLT. All patients recorded their maximum pain intensities on the day of separation (day 1) and on the following 4 days. RESULTS: Compared to the control group, pain perception was significantly reduced (p < 0.05) in the LLLT group on day 1 and continued to be reduced on day 2. Equivalent pain levels were recorded in both groups on days 3-5. CONCLUSION: Given our findings of a pain-reducing effect in young patients undergoing orthodontic separation during the early mixed-dentition stage, LLLT is an interesting alternative option of providing analgesia even in very young patients.

Construction and in vitro test of a new electrode for dentin resistance measurement.

It is necessary to reduce the tooth substance before treating a tooth with a dental crown. The preparation often requires reduction of the dentin. This results in a dentin wound and a thinner substance over the pulp, increases the risk of inflammation, and could result in necrosis of the pulp. To give the dentist information about the amount of dentin over the pulp during preparation, the Prepometer was developed. The function of this device is based on the measurement of the electric resistance of the tooth substance. The measuring behavior of the first-generation Prepometer is characterized by smaller values of electric resistance before reaching full contact of the measuring head to the dentin surface and the actual value RT. This measuring behavior can mislead inexperienced therapists with inaccurate values that suggest thinner dentin than the reality. In this study, a new electrode based on the technology of active guard drive was constructed to overcome this issue. The results show that improvement in the measuring behavior of the new electrode could be achieved, eliminating the earlier disadvantage of the Prepometer.