Production of parathyroid-like cells from thyroid stem cells in co-culture environment.

BACKGROUND: Parathyroid-like cells were aimed to be developed using cells isolated from thyroid since their embryological origins are the same. METHOD: Activin A and sonic hedgehog (Shh) are the proteins used in differentiation (dif) medium. Parathyroid and thyroid cells were cultured in a 3-dimensional environment and divided into five groups: thyroid standard (st) medium, thyroid dif medium, parathyroid st medium, thyroid-parathyroid co-culture st medium, and thyroid-parathyroid co-culture dif medium. Throughout 28 days of incubation, groups were investigated by carrying out the live dead assay, confocal microscopy, real-time PCR, immunohistochemistry and biochemical assays. RESULTS: Thyroid-parathyroid co-culture cells grown in dif medium exhibited upregulated expressions of parathormone (PTH) (5.1-fold), PTH1R (3.6-fold), calcium sensing receptor (CaSR) (8.8-fold), and loss of thyroid-specific thyroid transcription factor 1 (TTF1) expression when compared to the thyroid st medium group. PTH secretion decreased by 35% in the parathyroid st medium group and 99.9% in the thyroid-parathyroid co-culture st medium group but decreased only 3.5% in the thyroid-parathyroid co-culture dif medium group on day 28. CONCLUSION: Using Activin A and Shh proteins, thyroid stem/progenitor cells were differentiated to parathyroid-like cells successfully in a co-culture environment. A potentially effective novel method for cell differenatiation is co-culture of cells having the same embryological origin.

Striatal dopaminergic neurons as a potential target for GDNF based ischemic stroke therapy.

BACKGROUND: Glial cell-line-derived neurotrophic factor (GDNF) is a well-known regulatory neurotrophic factor on dopaminergic neurons. Several pathologies have been documented so far in case of any impairment in the dopaminergic system. This study aimed to investigate the potential protective role of lentiviral GNDF delivery on the small population of tyrosine hydroxylase (TH) positive dopamine producing striatal neurons after ischemic stroke. METHODS: Fourteen C57BL/6J male mice (8-10 weeks) were intracerebrally treated with lentiviral GDNF (Lv-GDNF) or vehicle. Ten days after injections, cerebral ischemia was induced by blockage of the middle cerebral artery. Animals were terminated 72 h after ischemia, and their brains were taken for histological and molecular investigations. Following confirmation of GDNF overexpression, TH immunostaining and immunoblotting were used to evaluate the role of GDNF on dopaminergic neurons. Next, Fluro Jade C staining was implemented to examine the degree of neuronal degeneration at the damaged parenchyma. RESULTS: Neither the amount of TH positive dopaminergic neurons nor the expression of TH changed in the Lv-GDNF treated animals comparing to the vehicle group. On the other hand, GDNF exposure caused a significant increase in the expression of Nurr1, an essential transcription factor for dopaminergic neurons and Gap43, growth and plasticity promoting protein, in the ischemic striatum. Treatment with Lv-GDNF gave rise to a significant reduction in the number of degenerated neurons. Finally, enhanced GDNF expression also induced expression of an important stress-related transcription factor NF-κB as well as the nitric oxide synthase enzymes iNOS and nNOS in the contralesional hemisphere.

A novel method for providing scaffold: Decellularization of parathyroid capsule.

This study aimed to generate a novel biomatrix from the decellularized human parathyroid capsule using different methods and to compare the efficiency of decellularization in the means of cell removal, structural integrity and extracellular matrix preservation. The parathyroid capsules, which were carefully dissected from the parathyroid tissue, were randomly divided into four groups and then decellularized using three different protocols: freeze-thaw only, sodium dodecyl sulphate and Triton X-100 treatments after freeze-thawing. Quantitative DNA analysis, agarose gel electrophoresis, sulphated glycosaminoglycan assay, histological analysis, immunohistochemistry and scanning electron microscopy were used to observe the efficiency of parathyroid capsule decellularization and preservation of extracellular matrix components. Considering all the results, it can be said that only freeze-thawing is not an effective method in parathyroid capsule decellularization. When the tissue was treated with a detergent agent in addition to freeze-thawing, the amount of DNA decreased by 90% while sulphated glycosaminoglycan amount maintained 50% compared to untreated tissue. Comparing the effects of the two detergents on the preservation of extracellular matrix such as collagen and sulphated glycosaminoglycan, it was seen that the integrity of tissues treated with Triton X-100 was preserved more than tissues treated with sodium dodecyl sulphate. It is concluded that Triton X-100 treatment with freeze-thawing is the most suitable and effective method for decellularizing the human parathyroid capsule. The biomatrix obtained with this method can be applied in the transplantation of parathyroid tissue and other endocrine tissue types in the body.

Evaluation of natural gum-based cryogels for soft tissue engineering.

In this study, three natural biomaterials, Locust bean gum (LBG), Xanthan gum (XG), and Mastic gum (MG), were combined to form cryogel scaffolds. Thermal and chemical characterizations revealed the successful blend formation from LBG-XG (LX) and LBG-XG-MG (LXM) polymers. All blends resulted in macro-porous scaffolds with interconnected pore structures under the size of 400 µm. The swollen cryogels had similar mechanical properties compared with other polysaccharide-based cryogels. The mean tensile and compressive modulus values of the wet cryogels were in the range of 3.5-11.6 kPa and 82-398 kPa, respectively. The sustained release of the small molecule Kartogenin from varying concentrations and ratios of cryogels was in between 32 and 66% through 21 days of incubation. Physical, mechanical, and chemical properties make LX and LXM polysaccharide-based cryogels promising candidates for cartilage and other soft tissue engineering, and drug delivery applications.

Investigation of Vasculogenesis Inducing Biphasic Scaffolds for Bone Tissue Engineering.

Vascularization is the main obstacle for the bone tissue engineering strategies since the defect size is generally large. Incorporation of angiogenic factors is one of the strategies employed in order to accelerate vascularization and improve bone healing. In this study, a biphasic scaffold consisting of fibrous poly(lactide-co-glycolide) (PLGA) and poly(lactide-co-glycolide)-block-poly(ethylene glycol)-block-poly(lactide-co-glycolide) (PLGA-PEG-PLGA) hydrogel loaded with vascular endothelial growth factor-A (VEGF) inducer, GS4012, was constructed. Mesenchymal stem cells isolated from rat bone marrow (rBMSCs) were used for differentiation into osteogenic cells, and endothelial cells isolated from rat peripheral blood (rPBECs) were used to test the in vitro endothelial cell recruitment. The biphasic scaffold was tested for cell proliferation, ALP expression, VEGF induction, expression of osteogenic genes by rBMSCs, and recruitment of rPBECs in vitro and for improved bone healing and vascularization in vivo on critical size rat cranial defects. Endothelial migration through porous insert and VEGF induction were obtained in vitro in response to GS4012 as well as the upregulation of ALP, Runx2, Col I, and OC gene expressions. The biphasic scaffold was also shown to be effective in improving endothelial cell recruitment, vascularization, and bone healing in vivo. Thus, the proposed design has a great potential for the healing of critical size bone defect in tissue engineering studies according to both in vitro and in vivo investigations.

The effect of polyethylenglycol gel on the delivery and osteogenic differentiation of homologous tooth germ-derived stem cells in a porcine model.

OBJECTIVES: The aim of this study was to investigate if bone regeneration can be promoted by homologous transplantation of STRO-1 sorted (STRO-1+) porcine tooth germ mesenchymal stem cells (TGSCs) with the combination of polyethylenglycol (PEG)-based hydrogel and biphasic calcium phosphate (BCP) scaffolds. MATERIAL AND METHODS: TGSCs were isolated from impacted third molars of domestic pigs. Nine critical-sized defects were created as (1) untreated defect; filled with (2) autogenous bone; (3) BCP + PEG; (4) BCP + PEG + unsorted TGSCs; (5) BCP + unsorted TGSCs; (6) BCP + PEG + STRO-1-sorted TGSCs; (7) BCP + STRO-1-sorted TGSCs; (8) BCP + PEG + osteogenic induced unsorted TGSCs; and (9) BCP + PEG + osteogenic induced STRO-1-sorted TGSCs in 20 domestic pigs. CM-DiI labelling was used to track cells in vivo. Histomorphometric assessment of new bone formation was achieved by toluidine blue O staining and microradiography after 1, 2, 4 and 12 weeks posttransplantation. RESULTS: Complete healing was achieved in all defects although defects with PEG hydrogel presented better bone formation while STRO-1+ and unsorted TGSCs showed similar ability to form new bone after 12 weeks. Transplanted cells were seen in defects where PEG hydrogel was used as carriers in contrast to defects treated with cells and only bone grafts. CONCLUSIONS: PEG hydrogel is an efficient carrier for homologous stem cell transplantation. TGSCs are capable of promoting bone healing in critical-sized defects in combination with bone graft and PEG hydrogel. CLINICAL RELEVANCE: This study provides information about the importance of the delivery vehicle for future translational stem cell delivery approaches.

Tissue transglutaminase_variant 2-transduced mesenchymal stem cells and their chondrogenic potential.

As cartilage is incapable of self-healing upon severe degeneration because of the lack of blood vessels, cartilage tissue engineering is gaining importance in the treatment of cartilage defects. This study was designed to improve cartilage tissue regeneration by expressing tissue transglutaminase variant 2 (TGM2_v2) in mesenchymal stem cells (MSC) derived from bone marrow of rats. For this purpose, rat MSCs transduced with TGM2_v2 were grown and differentiated on three-dimensional polybutylene succinate (PBSu) and poly-l-lactide (PLLA) blend scaffolds. The transduced cells could not only successfully express the short form transglutaminase-2, but also deposited the protein onto the scaffolds. In addition, they could spontaneously produce cartilage-specific proteins without any chondrogenic induction, suggesting that TGM2_v2 expression provided the cells the ability of chondrogenic differentiation. PBSu:PLLA scaffolds loaded with TGM2_v2 expressing MSCs could be used in repair of articular cartilage defects.

Fibrous bone tissue engineering scaffolds prepared by wet spinning of PLGA.

Having a self-healing capacity, bone is very well known to regenerate itself without leaving a scar. However, critical size defects due to trauma, tumor, disease, or infection involve bone graft surgeries in which complication rate is relatively at high levels. Bone tissue engineering appears as an alternative for grafting. Fibrous scaffolds are useful in tissue engineering applications since they have a high surface-to-volume ratio, and adjustable, highly interconnected porosity to enhance cell adhesion, survival, migration, and proliferation. They can be produced in a wide variety of fiber sizes and organizations. Wet spinning is a convenient way to produce fibrous scaffolds with consistent fiber size and good mechanical properties. In this study, a fibrous bone tissue engineering scaffold was produced using poly(lactic-co-glycolic acid) (PLGA). Different concentrations (20%, 25%, and 30%) of PLGA (PLA:PGA 75:25) (Mw = 66,000-107,000) were wet spun using coagulation baths composed of different ratios (75:25, 60:40, 50:50) of isopropanol and distilled water. Scanning electron microscopy (SEM) and in vitro degradation studies were performed to characterize the fibrous PLGA scaffolds. Mesenchymal stem cells were isolated from rat bone marrow, characterized by flow cytometry and seeded onto scaffolds to determine the most appropriate fibrous structure for cell proliferation. According to the results of SEM, degradation studies and cell proliferation assay, 20% PLGA wet spun in 60:40 coagulation bath was selected as the most successful condition for the preparation of wet-spun scaffolds. Wet spinning of different concentrations of PLGA (20%, 25%, 30%) dissolved in dichloromethane using different isopropanol:distilled water ratios of coagulation baths (75:25, 60:40, 50:50) were shown in this study.

Magnesium doping on TiN coatings affects mesenchymal stem cell differentiation and proliferation positively in a dose-dependent manner.

BACKGROUND: In vitro evaluation of cell-surface interactions for hard tissue implants have mostly been done using osteoblasts. However, when an implant is placed in the body, mesenchymal stem cells (MSCs) play a major role in new bone formation. Therefore, using MSCs in cell-surface investigations may provide more reliable information on the prediction of in vivo behavior of implants. OBJECTIVE: In this study, Mg doped TiN coatings ((Ti,Mg)N) were prepared and tested for their effect on MSC differentiation and mineralization. METHODS: MSCs were isolated from rat bone marrow (rBMSCs) and seeded onto bare Ti, TiN and Mg containing (Ti,Mg)N surfaces. Cell proliferation, osteogenic differentiation (collagen type 1, alkaline phosphatase activity), calcium phosphate deposition (von Kossa staining, Scanning Electron Microscopy) analysis were conducted. RESULTS: Differentiation towards osteoblast lineage was significantly improved with the increment in Mg presence. Collagen type I deposition, mineralization, and the ALP activity were higher on high Mg containing (>10 at% Mg) surfaces but differentiation of rBMSCs were found to be delayed. CONCLUSIONS: Mg presence affected rBMSCs proliferation and differentiation positively in a dose-dependent manner. However, high Mg amounts delayed both proliferation and differentiation.

Hyaluronic Acid/Chitosan Coacervate-Based Scaffolds.

Chitosan-chloride (CHI) and sodium hyaluronate (HA), two semiflexible biopolymers, self-assemble to form nonstoichiometric coacervates. The effect of counterions was briefly investigated by preparing HA/CHI coacervates in either CaCl2 or NaCl solutions to find only a small difference in their tendency to coacervate. Higher water content in coacervates within CaCl2 was attributed to the chaotropic nature of Ca2+ ions. This effect was also evidenced with smaller pore sizes for coacervates in NaCl. Besides, for coacervation of chitosan-glutamate (CHI-G) with HA, dynamic light scattering at different charge ratios indicated a wider coacervation region for the HA/CHI-G pair than the HA/CHI. This was attributed to the chaotropic and "soft" ion nature of glutamate compared to chloride as a counterion of chitosan. Positive zeta potential values for both coacervate suspensions were explained by the contribution of charge mismatch, chain semiflexibility, and intra- and intercomplex disproportionation. Finally, HA/CHI coacervates were used to encapsulate bone marrow stem cells. While cell viabilities in HA/CHI coacervates were remarkable up to 21 days, their well-spread morphology has proved that HA/CHI coacervates are promising scaffolds for cartilage tissue engineering.

Role of STRO-1 sorting of porcine dental germ stem cells in dental stem cell-mediated bone tissue engineering.

Stem cells of dental origin emerged as a new source for the regeneration of tissues with advantages mainly including non-invasive collection procedures and lack of ethical contraversies with their harvest or use. In this study, porcine TGSCs (pTGSCs) were isolated from mandibular third molar tooth germs of 6-month-old domestic pigs. This is the first study that reports the isolation and characterization of TGSCs from porcine third molars and their differentiation depending on STRO-1 expression. PTGSCs were sorted according to their STRO-1 expression as STRO-1(+) and STRO-1(-). Sorted and unsorted heterogenous cells (US) were characterized by their osteogenic, chondrogenic and adipogenic differentiation capabilities. STRO-1(+) cells exhibited a higher proliferation rate owing to their clonogenic properties. All three groups of cells were found differentiated into osteogenic lineage as shown by ALP activity, calcium deposition assay, detection of osteogenic mRNAs and, proteins and mineralization staining. According to differentiation analysis, STRO-1(+) cells did not show a better performance for osteogenesis compared to STRO-1(-) and US cells. This might indicate that STRO-1(+) cells might require a heterogeneous population of cells including STRO-1(-) in their niche to perform their proposed role in osteogenesis.

3D printed poly(ε-caprolactone) scaffolds modified with hydroxyapatite and poly(propylene fumarate) and their effects on the healing of rabbit femur defects.

A large variety of approaches have been used to treat large and irregular shaped bone defects with less than optimal success due to material or design issues. In recent years patient specific constructs prepared by additive manufacturing provided a solution to the need for shaping implants to fit irregular defects in the surgery theater. In this study, cylindrical disks of poly(ε-caprolactone) (PCL) were printed by fused deposition modeling and modified with nanohydroxyapatite (HAp) and poly(propylene fumarate) (PPF) to create a mechanically strong implant with well-defined pore size and porosity, controllable surface hydrophilicity (with PPF) and osteoconductivity (with HAp). Cytotoxicity, irritation and inflammation tests demonstrated that the scaffolds were biocompatible. PCL/HAp and PCL/HAp/PPF scaffolds were implanted in the femurs of rabbits with and without seeding with rabbit Bone Marrow Stem Cells (BMSC) and examined after 4 and 8 weeks with micro-CT, mechanically and histologically. BMSC seeded PCL/HAp/PPF scaffolds showed improved tissue regeneration as determined by bone mineral density and micro-CT. Compressive and tension stiffness values (394 and 463 N mm-1) were significantly higher than those of the healthy rabbit femur (316 and 392 N mm-1, respectively) after 8 weeks of implantation. These 3D implants have great potential for patient-specific bone defect treatments.

Poly(amino acid)-based fibrous scaffolds modified with surface-pendant peptides for cartilage tissue engineering.

In this study, fibrous scaffolds based on poly(γ-benzyl-l-glutamate) (PBLG) were investigated in terms of the chondrogenic differentiation potential of human tooth germ stem cells (HTGSCs). Through the solution-assisted bonding of the fibres, fully connected scaffolds with pore sizes in the range 20-400 µm were prepared. Biomimetic modification of the PBLG scaffolds was achieved by a two-step reaction procedure: first, aminolysis of the PBLG fibres' surface layers was performed, which resulted in an increase in the hydrophilicity of the fibrous scaffolds after the introduction of N5 -hydroxyethyl-l-glutamine units; and second, modification with the short peptide sequence azidopentanoyl-GGGRGDSGGGY-NH2 , using the 'click' reaction on the previously modified scaffold with 2-propynyl side-chains, was performed. Radio-assay of the 125 I-labelled peptide was used to evaluate the RGD density in the fibrous scaffolds (which varied in the range 10-3 -10 pm/cm2 ). All the PBLG scaffolds, especially with density 90 ± 20 fm/cm2 and 200 ± 100 fm/cm2 RGD, were found to be potentially suitable for growth and chondrogenic differentiation of HTGSCs. Copyright © 2015 John Wiley & Sons, Ltd.

Influence of co-culture on osteogenesis and angiogenesis of bone marrow mesenchymal stem cells and aortic endothelial cells.

Co-culture of bone forming cells and endothelial cells to induce pre-vascularization is one of the strategies used to solve the insufficient vascularization problem in bone tissue engineering attempts. In the study, primary cells isolated from 2 different tissues of the same animal, rat bone marrow stem cells (RBMSCs) and rat aortic endothelial cells (RAECs) were co-cultured to study the effects of co-culturing on both osteogenesis and angiogenesis. The formation of tube like structure in 2D culture was observed for the first time in the literature by the co-culture of primary cells from the same animal and also osteogenesis and angiogenesis were investigated at the same time by using this co-culture system. Co-cultured cells mineralized and formed microvasculature beginning from 14days of incubation. After 28days of incubation in the osteogenic medium, expression of osteogenic genes in co-cultures was significantly upregulated compared to RBMSCs cultured alone. These results suggest that the co-culture of endothelial cells with mesenchymal stem cells induces both osteogenesis and angiogenesis.

Behavior of mammalian cells on magnesium substituted bare and hydroxyapatite deposited (Ti,Mg)N coatings.

TiN and (Ti,Mg)N thin film coatings were deposited on titanium substrates by using cathodic arc physical vapor deposition (arc-PVD) technique with magnesium contents of 0, 4.24 at% (low Mg) and 10.42 at% (high Mg). The presence of magnesium on both normal (hFOB) and cancer (SaOS-2) osteoblast cell behavior was investigated in (Ti,Mg)N surfaces with or without prior hydroxyapatite (HA) deposition (in simulated body fluid, SBF). Mg incorporation on TiN films was found to have no apparent effect on the cell proliferation in bare surfaces but cell spreading was better on low Mg content surface for hFOB cells. SaOS-2 cells, on the other hand, showed an increased extra cellular matrix (ECM) deposition on low Mg surfaces but ECM deposition almost disappeared when Mg content was increased above 10 at%. HA deposited surfaces with high Mg content was shown to cause a significant decrease in cell viability. While the cells were flattened, elongated and spread over the surface in contact with each other via cellular extensions on unmodified and low Mg doped surfaces, unhealthy morphologies of cells with round shape with a limited number of extended arms was visualized on high Mg containing samples. In summary, Mg incorporation into the TiN coatings by arc-PVD technique and successive HA deposition led to promising cell responses on low Mg content surfaces for a better osteointegration performance.

Collagen scaffolds with in situ-grown calcium phosphate for osteogenic differentiation of Wharton's jelly and menstrual blood stem cells.

The aim of this research was to investigate the osteogenic differentiation potential of non-invasively obtained human stem cells on collagen nanocomposite scaffolds with in situ-grown calcium phosphate crystals. The foams had 70% porosity and pore sizes varying in the range 50-200 µm. The elastic modulus and compressive strength of the calcium phosphate containing collagen scaffolds were determined to be 234.5 kPa and 127.1 kPa, respectively, prior to in vitro studies. Mesenchymal stem cells (MSCs) obtained from Wharton's jelly and menstrual blood were seeded on the collagen scaffolds and proliferation and osteogenic differentiation capacities of these cells from two different sources were compared. The cells on the composite scaffold showed the highest alkaline phosphatase activity compared to the controls, cells on tissue culture polystyrene and cells on collagen scaffolds without in situ-formed calcium phosphate. MSCs isolated from both Wharton's jelly and menstrual blood showed a significant level of osteogenic activity, but those from Wharton's jelly performed better. In this study it was shown that collagen nanocomposite scaffolds seeded with cells obtained non-invasively from human tissues could represent a potential construct to be used in bone tissue engineering.

Cytotoxicity of local anesthetics to rats' articular cartilage: an experimental study.

OBJECTIVE: The aim of this study was to evaluate the effects of both in vivo and in vitro bupivacaine, levobupivacaine and tramadol on articular cartilage and chondrocytes in experimental rat models. METHODS: Thirty mature Sprague Dawley rats weighing 230-300 g were randomized into 3 groups. Bupivacaine (Group 1), levobupivacaine (Group 2) and tramadol (Group 3) were injected into the right knee joints and a physiological 0.9% saline into the left. From each group, 5 rats were executed 48 hours following drug administration after 5 and 10 days. The specimens were fixed, decalcified and stained with hematoxylin & eosin and toluidine blue. All samples were histopathologically evaluated according to the recommendation of ICRS' osteoarthritis and cartilage histopathology grading and staging system. Articular cartilage cells of the rats were cultured and seeded into cell culture flasks. Cartilage cell seeded samples (104 cells/ml) were incubated in three different anesthetic agents (0.5%); bupivacaine, levobupivacaine, and tramadol, respectively. CellTiter 96(®) Non-Radioactive Cell Proliferation (MTS) assay was used to determine the cell density on the samples. RESULTS: Statistically significant higher OARSI grades and OA stage and scores were detected when comparing the group injected with levobupivacaine and executed after 10 days with the levobupivacaine injected group killed after 48 hours (p<0.01 [p=0.008]). Although, statistical analysis could not be done due to insufficient number of samples in the in vitro part of the experiment, it can be concluded that tramadol is cytotoxic to rat chondrocyte in vitro after 30 min of exposure. Additionally, cell numbers in both the bupivacaine and levobupivacaine treated wells showed decrease throughout 15, 30 and 60 minute exposures. CONCLUSION: Although chondrotoxicity of bupivacaine was less harmful than levobupivacaine and tramadol, these findings suggest that local anesthetics may negatively affect articular cartilage and chondrocytes.

Effect of hyperbaric oxygen therapy on bone prefabrication in rats.

OBJECTIVES: This experimental study aimed to create a prefabricated vascularized bone graft using the interconnected porous coralline hydroxyapatite ceramic by combining vascular bundle implantation, mesenchymal stem cells, and hyperbaric oxygen therapy (HBOT) administration in a rat model. METHODS: Forty-five male Sprague-Dawley rats were divided into three groups, each containing 15 rats. The hydroxyapatite ceramics were vascularized by the superficial inferior epigastric artery and vein in all groups. These vessels passed through the hole of the hydroxyapatite blocks. In Group 2, mesenchymal stem cells were administered into the hydroxyapatite. In Group 3, both mesenchymal stem cells and HBOT were administered. The presence and density of any new bone formation and neovascularization were evaluated by radiography, microangiography, scintigraphy, biochemical analysis, and histomorphometry. RESULTS: Neovascularization and bone formation were significantly greater in Group 3, in which both mesenchymal stem cells and HBOT were applied, than the other groups. CONCLUSION: HBOT enhances neovascularization and osteogenesis, thus HBOT can provide optimal and faster prefabrication of a vascularized bone graft.