RESUMO
This study employed cell recycling, batch adaptation, cell mating and high-throughput screening to select adapted Spathaspora passalidarum strains with improved fermentative ability. The most promising candidate YK208-E11 (E11) showed a 3-fold increase in specific fermentation rate compared to the parental strain and an ethanol yield greater than 0.45 g/g substrate while co-utilizing cellobiose, glucose and xylose. Further characterization showed that strain E11 also makes 40% less biomass compared to the parental strain when cultivated in rich media under aerobic conditions. A tetrazolium agar overlay assay in the presence of respiration inhibitors, including rotenone, antimycin A, KCN and salicylhydroxamic acid elucidated the nature of the mutational events. Results indicated that E11 has a deficiency in its respiration system that could contribute to its low cell yield. Strain E11 was subjected to whole genome sequencing and an â¼11 kb deletion was identified; the open reading frames absent in strain E11 code for proteins with predicted functions in respiration, cell division and the actin cytoskeleton, and may contribute to the observed physiology of the adapted strain. Results of the tetrazolium overlay also suggest that cultivation on xylose affects the respiration capacity in the wild-type strain, which could account for its faster fermentation of xylose as compared to glucose. These results support our previous finding that S. passalidarum has highly unusual physiological responses to xylose under oxygen limitation.
Assuntos
Adaptação Fisiológica , Microbiologia Industrial , Saccharomycetales/crescimento & desenvolvimento , Saccharomycetales/metabolismo , Biomassa , Etanol/metabolismo , Fermentação , Proteínas Fúngicas/genética , Proteínas Fúngicas/metabolismo , Genoma Fúngico/genética , Viabilidade Microbiana , Oxigênio/metabolismo , Saccharomycetales/genética , Saccharomycetales/fisiologia , Análise de Sequência de DNA , Deleção de Sequência , Açúcares/metabolismoRESUMO
Lipid production by oleaginous yeasts is optimal at high carbon-to-nitrogen ratios. In the current study, nitrogen and carbon consumption by Lipomyces starkeyi were directly measured in defined minimal media with nitrogen content and agitation rates as variables. Shake flask cultures with an initial C:N ratio of 72:1 cultivated at 200rpm resulted in a lipid output of 10g/L, content of 55%, yield of 0.170g/g, and productivity of 0.06g/L/h. All of these values decreased by ≈50-60% when the agitation rate was raised to 300rpm or when the C:N ratio was lowered to 24:1, demonstrating the importance of these parameters. Under all conditions, L. starkeyi cultures tolerated acidified media (pH≈2.6) without difficulty, and produced considerable amounts of alcohols; including ethanol, mannitol, arabitol, and 2,3-butanediol. L. starkeyi also produced lipids from a corn stover hydrolysate, showing its potential to produce biofuels from renewable agricultural feedstocks.
Assuntos
Metabolismo dos Lipídeos/efeitos dos fármacos , Lipídeos/biossíntese , Lipomyces/metabolismo , Nitrogênio/farmacologia , Oxigênio/farmacologia , Aerobiose/efeitos dos fármacos , Amônia/metabolismo , Biocombustíveis , Carbono/análise , Ácidos Graxos/metabolismo , Concentração de Íons de Hidrogênio , Lipomyces/efeitos dos fármacos , Polímeros/metabolismo , Metabolismo Secundário/efeitos dos fármacos , Resíduos , Zea mays/químicaRESUMO
Spathaspora passalidarum NN245 (NRRL-Y27907) is an ascomycetous yeast that displays a higher specific fermentation rate with xylose than with glucose. Previous studies have shown that its capacity for xylose fermentation increases while cell yield decreases with decreasing aeration. Aeration optimization plays a crucial role in maximizing bioethanol production from lignocellulosic hydrolysates. Here, we compared the kinetics of S. passalidarum NN245 and Scheffersomyces (Pichia) stipitis NRRL Y-7124 fermenting 15% glucose, 15% xylose, or 12% xylose plus 3% glucose under four different aeration conditions. The maximum specific fermentation rate for S. passalidarum was 0.153 g ethanol/g CDW · h with a yield of 0.448 g/g from 150 g/L xylose at an oxygen transfer rate of 2.47 mmol O2 /L h. Increasing the OTR to 4.27 mmol O2 /L h. decreased the ethanol yield from 0.46 to 0.42 g/g xylose while increasing volumetric ethanol productivity from 0.52 to 0.8 g/L h. Both yeasts had lower cells yields and higher ethanol yields when growing on xylose than when growing on glucose. Acetic acid accretions of both strains correlated positively with increasing aeration. S. passalidarum secreted lower amounts of polyols compared to S. stipitis under most circumstances. In addition, the composition of polyols differed: S. passalidarum accumulated mostly xylitol and R,R-2,3-butanediol (BD) whereas S. stipitis accumulated mostly xylitol and ribitol when cultivated in xylose or a mixture of 12% xylose and 3% glucose. R,R-2,3-BD accumulation by S. passalidarum during xylose fermentation can be as much as four times of that by S. stipitis, and R,R-2,3-BD is also the most abundant byproduct after xylitol. The ratios of polyols accumulated by the two species under different aeration conditions and the implications of these observations for strain and process engineering are discussed.
Assuntos
Etanol/metabolismo , Oxigênio/metabolismo , Polímeros/metabolismo , Saccharomycetales/metabolismo , Ácido Acético/análise , Ácido Acético/metabolismo , Biocombustíveis , Etanol/análise , Fermentação , Glucose/metabolismo , Cinética , Polímeros/análise , Xilose/metabolismoRESUMO
The inability of the yeast Saccharomyces cerevisiae to ferment xylose effectively under anaerobic conditions is a major barrier to economical production of lignocellulosic biofuels. Although genetic approaches have enabled engineering of S. cerevisiae to convert xylose efficiently into ethanol in defined lab medium, few strains are able to ferment xylose from lignocellulosic hydrolysates in the absence of oxygen. This limited xylose conversion is believed to result from small molecules generated during biomass pretreatment and hydrolysis, which induce cellular stress and impair metabolism. Here, we describe the development of a xylose-fermenting S. cerevisiae strain with tolerance to a range of pretreated and hydrolyzed lignocellulose, including Ammonia Fiber Expansion (AFEX)-pretreated corn stover hydrolysate (ACSH). We genetically engineered a hydrolysate-resistant yeast strain with bacterial xylose isomerase and then applied two separate stages of aerobic and anaerobic directed evolution. The emergent S. cerevisiae strain rapidly converted xylose from lab medium and ACSH to ethanol under strict anaerobic conditions. Metabolomic, genetic and biochemical analyses suggested that a missense mutation in GRE3, which was acquired during the anaerobic evolution, contributed toward improved xylose conversion by reducing intracellular production of xylitol, an inhibitor of xylose isomerase. These results validate our combinatorial approach, which utilized phenotypic strain selection, rational engineering and directed evolution for the generation of a robust S. cerevisiae strain with the ability to ferment xylose anaerobically from ACSH.
Assuntos
Biocombustíveis , Lignina/metabolismo , Saccharomyces cerevisiae/genética , Xilose/metabolismo , Amônia/metabolismo , Anaerobiose , Biomassa , Etanol/metabolismo , Fermentação , Engenharia Genética , Hidrólise , Saccharomyces cerevisiae/enzimologia , Xilose/genética , Zea mays/metabolismoRESUMO
We report the development of an efficient genetic transformation system for Lipomyces starkeyi based on a modified lithium acetate transformation protocol. L. starkeyi is a highly lipogenic yeast that grows on a wide range of substrates. The initial transformation rate for this species was extremely low, and required very high concentrations of DNA. A systematic approach for optimizing the protocol resulted in an increase in the transformation efficiency by four orders of magnitude. Important parameters included cell density, the duration of incubation and recovery periods, the heat shock temperature, and the concentration of lithium acetate and carrier DNA within the transformation mixture. We have achieved efficiencies in excess of 8,000 transformants/µg DNA, which now make it possible to screen libraries in the metabolic engineering of this yeast. Metabolic engineering based on this transformation system could improve lipogenesis and enable formation of higher value products.
Assuntos
Técnicas de Transferência de Genes , Lipomyces/genética , Transformação Genética , Acetatos , Lipomyces/crescimento & desenvolvimento , Lipomyces/metabolismo , Plasmídeos/genética , TemperaturaRESUMO
BACKGROUND: Simultaneous saccharification and co-fermentation (SSCF) process involves enzymatic hydrolysis of pretreated lignocellulosic biomass and fermentation of glucose and xylose in one bioreactor. The optimal temperatures for enzymatic hydrolysis are higher than the standard fermentation temperature of ethanologenic Saccharomyces cerevisiae. Moreover, degradation products resulting from biomass pretreatment impair fermentation of sugars, especially xylose, and can synergize with high temperature stress. One approach to resolve both concerns is to utilize a strain background with innate tolerance to both elevated temperatures and degradation products. RESULTS: In this study, we screened a panel of 108 wild and domesticated Saccharomyces cerevisiae strains isolated from a wide range of environmental niches. One wild strain was selected based on its growth tolerance to simultaneous elevated temperature and AFEX™ (Ammonia Fiber Expansion) degradation products. After engineering the strain with two copies of the Scheffersomyces stipitis xylose reductase, xylitol dehydrogenase and xylulokinase genes, we compared the ability of this engineered strain to the benchmark 424A(LNH-ST) strain in ethanol production and xylose fermentation in standard lab medium and AFEX pretreated corn stover (ACS) hydrolysates, as well as in SSCF of ACS at different temperatures. In SSCF of 9% (w/w) glucan loading ACS at 35°C, the engineered strain showed higher cell viabilities and produced a similar amount of ethanol (51.3 g/L) compared to the benchmark 424A(LNH-ST) strain. CONCLUSION: These results validate our approach in the selection of wild Saccharomyces cerevisiae strains with thermo-tolerance and degradation products tolerance properties for lignocellulosic biofuel production. The wild and domesticated yeast strains phenotyped in this work are publically available for others to use as genetic backgrounds for fermentation of their pretreated biomass at elevated temperatures.
RESUMO
Fermentation of cellulosic and hemicellulosic sugars from biomass could resolve food-versus-fuel conflicts inherent in the bioconversion of grains. However, the inability to coferment glucose and xylose is a major challenge to the economical use of lignocellulose as a feedstock. Simultaneous cofermentation of glucose, xylose, and cellobiose is problematic for most microbes because glucose represses utilization of the other saccharides. Surprisingly, the ascomycetous, beetle-associated yeast Spathaspora passalidarum, which ferments xylose and cellobiose natively, can also coferment these two sugars in the presence of 30 g/liter glucose. S. passalidarum simultaneously assimilates glucose and xylose aerobically, it simultaneously coferments glucose, cellobiose, and xylose with an ethanol yield of 0.42 g/g, and it has a specific ethanol production rate on xylose more than 3 times that of the corresponding rate on glucose. Moreover, an adapted strain of S. passalidarum produced 39 g/liter ethanol with a yield of 0.37 g/g sugars from a hardwood hydrolysate. Metabolome analysis of S. passalidarum before onset and during the fermentations of glucose and xylose showed that the flux of glycolytic intermediates is significantly higher on xylose than on glucose. The high affinity of its xylose reductase activities for NADH and xylose combined with allosteric activation of glycolysis probably accounts in part for its unusual capacities. These features make S. passalidarum very attractive for studying regulatory mechanisms enabling bioconversion of lignocellulosic materials by yeasts.
Assuntos
Celobiose/metabolismo , Glucose/metabolismo , Saccharomycetales/metabolismo , Xilose/metabolismo , Animais , Besouros/microbiologia , Etanol/metabolismo , Fermentação , Metaboloma , Saccharomycetales/isolamento & purificaçãoRESUMO
The polyhydroxyalkanoate (PHA) copolymer poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB-co-HHx)] has been shown to have potential to serve as a commercial bioplastic. Synthesis of P(HB-co-HHx) from plant oil has been demonstrated with recombinant Ralstonia eutropha strains expressing heterologous PHA synthases capable of incorporating HB and HHx into the polymer. With these strains, however, short-chain-length fatty acids had to be included in the medium to generate PHA with high HHx content. Our group has engineered two R. eutropha strains that accumulate high levels of P(HB-co-HHx) with significant HHx content directly from palm oil, one of the world's most abundant plant oils. The strains express a newly characterized PHA synthase gene from the bacterium Rhodococcus aetherivorans I24. Expression of an enoyl coenzyme A (enoyl-CoA) hydratase gene (phaJ) from Pseudomonas aeruginosa was shown to increase PHA accumulation. Furthermore, varying the activity of acetoacetyl-CoA reductase (encoded by phaB) altered the level of HHx in the polymer. The strains with the highest PHA titers utilized plasmids for recombinant gene expression, so an R. eutropha plasmid stability system was developed. In this system, the essential pyrroline-5-carboxylate reductase gene proC was deleted from strain genomes and expressed from a plasmid, making the plasmid necessary for growth in minimal media. This study resulted in two engineered strains for production of P(HB-co-HHx) from palm oil. In palm oil fermentations, one strain accumulated 71% of its cell dry weight as PHA with 17 mol% HHx, while the other strain accumulated 66% of its cell dry weight as PHA with 30 mol% HHx.
Assuntos
Ácido 3-Hidroxibutírico/metabolismo , Biotecnologia/métodos , Caproatos/metabolismo , Cupriavidus necator/genética , Cupriavidus necator/metabolismo , Redes e Vias Metabólicas/genética , Óleos de Plantas/metabolismo , DNA Bacteriano/química , DNA Bacteriano/genética , Engenharia Genética , Dados de Sequência Molecular , Pseudomonas aeruginosa/enzimologia , Pseudomonas aeruginosa/genética , Proteínas Recombinantes/genética , Proteínas Recombinantes/metabolismo , Rhodococcus/enzimologia , Rhodococcus/genética , Análise de Sequência de DNARESUMO
We employed systematic mixture analysis to determine optimal levels of acetate, propionate, and butyrate for cell growth and polyhydroxyalkanoate (PHA) production by Ralstonia eutropha H16. Butyrate was the preferred acid for robust cell growth and high PHA production. The 3-hydroxyvalerate content in the resulting PHA depended on the proportion of propionate initially present in the growth medium. The proportion of acetate dramatically affected the final pH of the growth medium. A model was constructed using our data that predicts the effects of these acids, individually and in combination, on cell dry weight (CDW), PHA content (%CDW), PHA production, 3HV in the polymer, and final culture pH. Cell growth and PHA production improved approximately 1.5-fold over initial conditions when the proportion of butyrate was increased. Optimization of the phosphate buffer content in medium containing higher amounts of butyrate improved cell growth and PHA production more than 4-fold. The validated organic acid mixture analysis model can be used to optimize R. eutropha culture conditions, in order to meet targets for PHA production and/or polymer HV content. By modifying the growth medium made from treated industrial waste, such as palm oil mill effluent, more PHA can be produced.
Assuntos
Ácidos/metabolismo , Meios de Cultura/metabolismo , Cupriavidus necator/crescimento & desenvolvimento , Cupriavidus necator/metabolismo , Poli-Hidroxialcanoatos/metabolismo , Butiratos/metabolismo , Meios de Cultura/química , Cupriavidus necator/genética , Concentração de Íons de HidrogênioRESUMO
We report the successful culture of oil palm (Elaeis guineensis Jacq.) suspension cells in a bioreactor. In vitro propagation of this perennial monocotyledonous tree is an important part of the oil palm industry's approach to clonal propagation of high-yielding accessions. During culture of oil palm cells in a batch bioreactor, nutrients and extracellular metabolites were monitored, and kinetic parameters and nutrient-to-biomass conversion yields were calculated. The biomass increased approximately 3.5-fold per month, consistent with values reported for shake flask cultures. Although the carbon source was completely depleted by the end of the run, nitrogen sources remained in large excess and the sugar-to-biomass conversion yield remained low. Linear growth indicated that the cells were limited. The results obtained from the bioreactor runs indicated that we should be able to improve biomass production by carrying out optimization studies. Therefore, we initiated multi-factorial analyses using response surface experimental designs to investigate the effects of different nitrogen sources, as well as inoculum size and conditioned medium, on biomass production in flask cultures. Whereas glutamine does not have a significant effect on biomass production, ammonia has a positive effect up to an optimum concentration. Both inoculum density and conditioned medium have positive, synergistic effects on biomass production.