Intelligent health and sport: An interplay between flexible sensors and basketball.

Basketball, as one of the most popular sports in the world, has millions of followers and massive economic value. Basketball evolves so fast that it requires teams with smarter strategies, better skills, and stronger players. However, the competition strategies and training methods in basketball are still experience-based, lacking precise data to drive for more efficient training and strategies. On the other hand, flexible sensors, as a new class of sensors, have been a hotspot for scientific research and widely applied in various fields. Due to their excellent characteristics of flexibility, wearing comfort, convenience, and response speed, integrating flexible sensors into basketball has the potential to greatly promote all aspects of the sport. This paper aims to bring more fusion between basketball and flexible sensors. In this perspective, we first perform a review of the history of sensing technologies in the basketball sport and discuss mechanisms of flexible sensors applied on basketball players. Then specific scenarios for flexible sensors applied in basketball were elaborated on in detail. Finally, we envision the potential applications of flexible sensors in basketball and present our views on future development directions. We hope this paper can depict how flexible sensing technology is integrated into basketball systems and point out the future development of basketball with the help of flexible sensors.

Controllable-morphology polymer blend photonic metafoam for radiative cooling.

Incorporating radiative cooling photonic structures into the cooling systems of buildings presents a novel strategy to mitigate global warming and boost global carbon neutrality. Photonic structures with excellent solar reflection and thermal emission can be obtained by a rational combination of different materials. The current preparation strategies of radiative cooling materials are dominated by doping inorganic micro-nano particles into polymers, which usually possess insufficient solar reflectance. Here, a porous polymer metafoam was prepared with polycarbonate (PC) and polydimethylsiloxane (PDMS) using a simple thermally induced phase separation method. The metafoam exhibits strong solar reflectivity (97%), superior thermal emissivity (91%), and low thermal conductivity (46 mW m-1 K-1) due to the controllable morphology of the randomly dispersed light-scattering air voids. Cooling tests demonstrate that the metafoam could reduce the average temperature by 5.2 °C and 10.2 °C during the daytime and nighttime, respectively. In addition, the simulation of a cooling energy system of buildings indicates that the metafoam can save 3.2-26.7 MJ m-2 per year in different cities, which is an energy-saving percentage of 14.7-41%. The excellent comprehensive performances, including the passive cooling property, thermal insulation and self-cleaning of the metafoam makes it appropriate for practical outdoor applications, exhibiting its great potential as an energy-saving building cooling material.

Synthesis of carboxymethyl chitosan-functionalized graphene nanomaterial for anticorrosive reinforcement of waterborne epoxy coating.

In this study, a carboxymethyl chitosan functionalized graphene (CMCS-rGO) nanomaterial was successfully synthesized in aqueous solution by non-covalent functionalization method. Fourier transform infrared, Raman, ultraviolet visible spectroscopy and thermogravimetric analysis confirmed that carboxymethyl chitosan had been successfully anchored on the surface of graphene. In addition, the CMCS-rGO was used as an anticorrosive nanofiller to be added to waterborne epoxy (EP) coatings to protect steel substrates. The corrosion protection behavior of all coatings was tested by electrochemical workstation, and the results proved that the incorporation of well-dispersed CMCS-rGO nanomaterials could significantly improve the anti-corrosion performance of waterborne epoxy coatings. Furthermore, even after 180 days of immersion, the impedance modulus value of the 0.2 % CMCS-rGO/EP at |Z|f =0.01 Hz was still approximately 2 orders of magnitude higher than that of the EP.

A less harmful system of preparing robust fabrics for integrated self-cleaning, oil-water separation and water purification.

Although the development of constructing oil-water separation materials is quick, the defects of using harmful regents, weak stability and single function still exist. Here, we report an effective and less-harmful system with poly-dimethylsiloxane (PDMS)/ZnO composite solution to fabricate robust superhydrophobic surfaces for oil-water separation and removal of organic pollutant. The obtained samples were characterized by a range of instruments. The water contact angle (WCA) of coated cotton was 155.6°, which attributed to the synergetic effect of low surface energy of PDMS and roughness of ZnO nanoparticles. The coated cotton was tolerant to mechanical damage, various corrosive solvents and temperature conditions. The emphasis of this study is the combination of superhydrophobicity and photocatalysis, resulting in multifunctional cotton with dual self-cleaning properties, outstanding oil-water separation ability and efficient water purification property. When utilized a simple laboratory facility, the cotton could separate water from oil-water mixture with a high efficiency (99.3%). Furthermore, the dyed water could be purified with coated cotton through photocatalysis under UV light and became colorless. Meanwhile, this mild and facile method could also be utilized to modify other porous substrates, such as PET, silk, non-woven and sponge. Therefore, the characteristics of environmental protection and easy operation make this cotton a desirable candidate for extensive applications in self-cleaning, oil-water separation and water purification.

Fabrication of superhydrophobic cotton fabric with fluorinated TiO2 sol by a green and one-step sol-gel process.

The purpose of this paper is to propose a facile, green and low-cost approach of the preparation of superhydrophobic cotton textiles, which can be fabricated with fluorinated TiO2 sols via a sol-gel method. The coating was prepared with TiO2 sols catalyzed with acetic acid, then modified by poly(Hexafluorobutyl methacrylate) (PHFBMA) which was synthesized by free radical polymerization. The wettability, surface morphology and chemical composition of pristine and modified cotton fabrics were investigated. The modified fabric presents a high contact angle reached up to 152.5°. The successful incorporation of fluorinated TiO2 nanoparticles into cotton fabric was verified by the above measurements results. Additionally, the chemical stability of the coated fabric has been tested by immersing in different pH solutions and organic solvents, demonstrating the outstanding water repellency of the fabric. Furthermore, the treated cotton fabric shows excellent self-cleaning properties, which makes it an ideal material for large-scaled industrial applications in various conditions.

Biodegradable sizing agents from soy protein via controlled hydrolysis and dis-entanglement for remediation of textile effluents.

Fully biodegradable textile sizes with satisfactory performance properties were developed from soy protein with controlled hydrolysis and dis-entanglement to tackle the intractable environmental issues associated with the non-biodegradable polyvinyl alcohol (PVA) in textile effluents. PVA derived from petroleum is the primary sizing agent due to its excellent sizing performance on polyester-containing yarns, especially in increasingly prevailing high-speed weaving. However, due to the poor biodegradability, PVA causes serious environmental pollution, and thus, should be substituted with more environmentally friendly polymers. Soy protein treated with high amount of triethanolamine was found with acceptable sizing properties. However, triethanolamine is also non-biodegradable and originated from petroleum, therefore, is not an ideal additive. In this research, soy sizes were developed from soy protein treated with glycerol, the biodegradable triol that could also be obtained from soy. The soy sizes had good film properties, adhesion to polyester and abrasion resistance close to PVA, rendering them qualified for sizing applications. Regarding desizing, consumption of water and energy for removal of soy size could be remarkably decreased, comparing to removal of PVA. Moreover, with satisfactory degradability, the wastewater containing soy sizes was readily dischargeable after treated in activated sludge for two days. In summary, the fully biodegradable soy sizes had potential to substitute PVA for sustainable textile processing.