RESUMO
BACKGROUND: Simulation-based medical education (SBME) and three-dimensional printed (3DP) models are increasingly used in continuing medical education and clinical training. However, our understanding of their role and value in improving trainees' understanding of the anatomical and surgical procedures associated with liver surgery remains limited. Furthermore, gender bias is also a potential factor in the evaluation of medical education. Therefore, the aim of this study was to evaluate the educational benefits trainees receive from the use of novel 3DP liver models while considering trainees' experience and gender. METHODS: Full-sized 3DP liver models were developed and printed using transparent material based on anonymous CT scans. We used printed 3D models and conventional 2D CT scans of the liver to investigate thirty trainees with various levels of experience and different genders in the context of both small group teaching and formative assessment. We adopted a mixed methods approach involving both questionnaires and focus groups to collect the views of different trainees and monitors to assess trainees' educational benefits and perceptions after progressing through different training programs. We used Objective Structured Clinical Examination (OSCE) and Likert scales to support thematic analysis of the responses to the questionnaires by trainees and monitors, respectively. Descriptive analyses were conducted using SPSS statistical software version 21.0. RESULTS: Overall, a 3DP model of the liver is of great significance for improving trainees' understanding of surgical procedures and cooperation during operation. After viewing the personalized full-sized 3DP liver model, all trainees at the various levels exhibited significant improvements in their understanding of the key points of surgery (p < 0.05), especially regarding the planned surgical procedure and key details of the surgical procedures. More importantly, the trainees exhibited higher levels of satisfaction and self-confidence during the operation regardless of gender. However, with regard to gender, the results showed that the improvement of male trainees after training with the 3DP liver model was more significant than that of female trainees in understanding and cooperation during the surgical procedure, while no such trend was found with regard to their understanding of the base knowledge. CONCLUSION: Trainees and monitors agreed that the use of 3DP liver models was acceptable. The improvement of the learning effect for practical skills and theoretical understanding after training with the 3DP liver models was significant. This study also indicated that training with personalized 3DP liver models can improve all trainees' presurgical understanding of liver tumours and surgery and males show more advantage in understanding and cooperation during the surgical procedure as compared to females. Full-sized realistic 3DP models of the liver are an effective auxiliary teaching tool for SBME teaching in Chinese continuing medical education.
Assuntos
Neoplasias , Sexismo , Humanos , Feminino , Masculino , Fígado/diagnóstico por imagem , Fígado/cirurgia , Abdome , Impressão TridimensionalRESUMO
OBJECTIVE: Improper placement of the ventricular catheter tip is the most common cause of shunting disorders after ventriculoperitoneal shunt (VPS) placement surgery. Here, through two illustrative cases, we described a novel method of precise ventricular catheter tip location. METHODS: Three-dimensional (3D) Slicer software was used to define the ventricle puncture path and determine the ventricle catheter tip location preoperatively, and the 3D individualized guide model was printed. RESULTS: The ventricular puncture was performed under the guidance of the 3D guide to achieve precise ventricle catheter tip location intraoperatively. CONCLUSIONS: This technique is safe, simple, efficient and cost-effective, which facilitates its clinical implementation and promotion.
Assuntos
Catéteres , Procedimentos Neurocirúrgicos , Impressão Tridimensional , Software , Derivação Ventriculoperitoneal , Humanos , Ventrículos Cerebrais/cirurgia , Hidrocefalia/cirurgia , Procedimentos Neurocirúrgicos/efeitos adversos , Procedimentos Neurocirúrgicos/métodos , Derivação Ventriculoperitoneal/efeitos adversos , Derivação Ventriculoperitoneal/métodos , Masculino , Adulto , Pessoa de Meia-Idade , Cuidados Intraoperatórios/efeitos adversos , Cuidados Intraoperatórios/métodosRESUMO
Background: We present the first case report of the treatment of congenital vaginal atresia by 3D-printed patient-specific vaginal scaffold from China. Case presentation: A 17-year-old female patient was referred to our department for treatment of congenital vaginal atresia and complications arising from previous failed operations. Pelvic examination was conducted to understand the morphological characteristics and severity of stenosis, and based on which we designed our prototypes of vaginal scaffold using software UG NX10.0. We finally obtained our patient-specific mold, which was 50 mm in length, 28 mm in diameter, 2 mm of thickness with a whole weight of 7.6 g, and it was made of polycaprolactone. After removing scar tissues caused by vaginal stenosis, an 8 cm long artificial tunnel was created, and then the polycaprolactone (PCL) vaginal mold was placed and sutured. The patient had no discomfort after surgery and was discharged 3 days after the surgery. Follow-up for 1 year after surgery, through hysteroscopy and colposcopy, it was found that the cervix was smooth, the vaginal wall was covered with stratified squamous epithelium, and the vaginal wall was soft and lubricated, which was close to a normal vagina. The incompletely absorbed mold was taken out one year after the operation. Hysteroscopy and colposcopy were performed one year and two years after the mold was taken out. The vagina was unobstructed and the length was about 12 cm. The appearance of the vaginal wrinkles was normal. The patient's quality of sexual life was good. Conclusion: Our team tried to treat congenital vaginal atresia by 3D-printed patient-specific vaginal scaffold, which can effectively reduce patient complications and reduce patient pain. Through long-term follow-up, we found that this technique has achieved favorable results and improved the patient's quality of sexual life.
RESUMO
This study evaluated the efficacy and safety of 3D printing technology combined with percutaneous nephrolithotomy in the treatment of complex renal calculi. Ninety patients with complex renal calculi were randomly divided into a 3D printing group (45 patients) and a control group (45 patients). In the 3D printing group, a patient-specific 1:1 3D printing model was established based on the patient's thin-layer CT scanning data. A 3D printing model was used for preoperative communication between doctors and patients. Preoperative puncture training, channel design, residual stone prediction, and percutaneous nephrolithotomy were performed under the guidance of a 3D printing model and B-ultrasound. The control group was treated with the conventional B-ultrasound-guided puncture method. Results suggest that there was a statistically significant difference between the two groups (P < 0.05). The overall score of the doctor-patient communication objects in the 3D printing group was 19.32 ± 1.57 points, and in the control group, it was 14.51 ± 2.13 points. The operation time of the 3D printing group was 103.21 ± 13.49 min, and that of the control group was 126.12 ± 25.87 min. The calculi clearance rate of the 3D printing group was 96%, while that of the control group was 80%. The incidence of postoperative complications was 6.67% in the 3D printing group and 22.22% in the control group. Compared with traditional percutaneous nephrolithotomy, 3D printing technology combined with percutaneous nephrolithotomy can significantly enhance the effectiveness of doctor-patient communication, shorten operation time, reduce operation bleeding, improve the stone clearance rate, reduce the incidence of complications and shorten the length of hospital stay. The proposed method is thus a safe and effective method to treat complex renal calculi.
Assuntos
Cálculos Renais/cirurgia , Modelos Anatômicos , Nefrolitotomia Percutânea , Impressão Tridimensional , Adulto , Idoso , China , Feminino , Comunicação em Saúde , Humanos , Cálculos Renais/diagnóstico por imagem , Tempo de Internação , Masculino , Pessoa de Meia-Idade , Nefrolitotomia Percutânea/efeitos adversos , Duração da Cirurgia , Educação de Pacientes como Assunto , Relações Médico-Paciente , Complicações Pós-Operatórias/etiologia , Fatores de Tempo , Tomografia Computadorizada por Raios X , Resultado do Tratamento , Ultrassonografia , Adulto JovemRESUMO
OBJECTIVE: The oblique lateral locking plate system (OLLPS) is a novel internal fixation with a locking and reverse pedicle track screw configuration designed for oblique lumbar interbody fusion (OLIF). The OLLPS is placed in a single position through the oblique lateral surgical corridor to reduce operative time and complications associated with prolonged anesthesia and prone positioning. The purpose of this study was to verify the biomechanical effect of the OLLPS. METHODS: An intact finite element model of L1-S1 (intact) was established based on computed tomography images of a healthy male volunteer. The L4-L5 intervertebral space was selected as the surgical segment. The surgical models were established separately based on OLIF surgical procedures and different internal fixations: 1) stand-alone OLIF (SA); 2) OLIF with a 2-screw lateral plate; 3) OLIF with a 4-screw lateral plate; 4) OLIF with OLLPS; and 5) OLIF with bilateral pedicle screw fixation (BPS). After validation of the intact model, physiologic loads were applied to the superior surface of L1 to simulate motions such as flexion, extension, left bending, right bending, left rotation, and right rotation. The evaluation indices included the L4/5 range of motion, the L4 maximum displacement, and the maximum stresses of the superior and inferior end plates, the cage, and the supplemental fixation. RESULTS: During OLIF surgery, the OLLPS provided multiplanar stability similar to that provided by BPS. Compared with 2-screw lateral plate and 4-screw lateral plate, OLLPS had better biomechanical properties in terms of enhancing the instant stability of the surgical segment, reducing the stress on the superior and inferior end plates of the surgical segment, and decreasing the risk of cage subsidence. CONCLUSIONS: With a minimally invasive background, the OLLPS can be used as an alternative to BPS in OLIF and it has better prospects for clinical promotions and applications.
Assuntos
Parafusos Pediculares , Fusão Vertebral , Fenômenos Biomecânicos/fisiologia , Análise de Elementos Finitos , Humanos , Vértebras Lombares/diagnóstico por imagem , Vértebras Lombares/cirurgia , Masculino , Amplitude de Movimento Articular/fisiologia , Fusão Vertebral/métodosRESUMO
BACKGROUND: Longbone infected bone defect remains a great challenge due to multiple surgeries, long-term treatment duration, and uncertain prognosis. Treatment principles include eradication/debridement, stabilization, and antibiotic administration. An antibiotic cement-coated nail has shown great prospects due to both local antibiotic elution and stabilization of bone defects. However, the current fabrication technique remains to be improved. METHODS: For the first time, we described a new method for custom-made cement-coated nail fabrication based on a 3D printing technique. A retrospective study of 19 consecutive patients with long bone infected bone defects from one medical center was conducted who met the inclusion and exclusion criteria from November 2016 to May 2020. The treatment involved thorough debridement, custom-made antibiotic cement-coated nail filling, and culture-specific systemic antibiotic treatment guided by a multidisciplinary team. Clinical and radiographic examinations (X-ray and CT scans) were used to evaluate bony union. Clinical and laboratory examinations were used to evaluate the infection control. The SF-36 score was used to evaluate patients' quality of life pre- and postoperatively. RESULTS: The mean follow-up was 98.8 weeks (ranging from 40 to 192). All cases achieved infection control, 3 cases achieved bone healing after one-stage operation, and 12 cases achieved bone healing after a two-stage bone graft procedure. At the last follow-up, none of the 19 patients had infection recurrence or 1 case had failure of the protective plate. The pre- and postoperative SF-36 score showed that there were statistical differences in all the 9 aspects. CONCLUSIONS: The precise custom-made antibiotic cement-coated intramedullary nail through the 3D printing technique used in this study is an effective strategy for the treatment of infected bone defects of long bone. This technique may help to increase the infection control rate and promote bone healing.