RESUMO
3D bioprinting is recognized as a promising biomanufacturing technology that enables the reproducible and high-throughput production of tissues and organs through the deposition of different bioinks. Especially, bioinks based on loaded cells allow for immediate cellularity upon printing, providing opportunities for enhanced cell differentiation for organ manufacturing and regeneration. Thus, extensive applications have been found in the field of tissue engineering. The performance of the bioinks determines the functionality of the entire printed construct throughout the bioprinting process. It is generally expected that bioinks should support the encapsulated cells to achieve their respective cellular functions and withstand normal physiological pressure exerted on the printed constructs. The bioinks should also exhibit a suitable printability for precise deposition of the constructs. These characteristics are essential for the functional development of tissues and organs in bioprinting and are often achieved through the combination of different biomaterials. In this review, we have discussed the cutting-edge outstanding performance of different bioinks for printing various human tissues and organs in recent years. We have also examined the current status of 3D bioprinting and discussed its future prospects in relieving or curing human health problems.
Assuntos
Bioimpressão , Humanos , Impressão Tridimensional , Engenharia Tecidual , Materiais BiocompatíveisRESUMO
A VCF-based mode-matching micromachine-optimized tuning fork gyroscope is proposed to not only maximize the scale factor of the device, but also avoid use of an additional quadrature-nulling loop to prevent structure complexity, pick-up electrode occupation, and coupling with a mode-matching loop. In detail, a mode-matching, closed-loop system without a quadrature-nulling loop is established, and the corresponding convergence and matching error are quantitatively analyzed. The optimal straight beam of the gyro structure is then modeled to significantly reduce the quadrature coupling. The test results show that the frequency split is narrowed from 20 Hz to 0.014 Hz. The scale factor is improved 20.6 times and the bias instability (BI) is suppressed 3.28 times. The observed matching accuracy demonstrates that a mode matching system without a quadrature suppression loop is feasible and that the proposed device represents a competitive design for a mode-matching gyroscope.
RESUMO
Planar super-oscillatory lens (SOL), a far-field subwavelength-focusing diffractive device, holds great potential for achieving sub-diffraction-limit imaging at multiple wavelengths. However, conventional SOL devices suffer from a numerical-aperture-related intrinsic tradeoff among the depth of focus (DoF), chromatic dispersion and focusing spot size. Here, we apply a multi-objective genetic algorithm (GA) optimization approach to design an apochromatic binary-phase SOL having a prolonged DoF, customized working distance (WD), minimized main-lobe size, and suppressed side-lobe intensity. Experimental implementation demonstrates simultaneous focusing of blue, green and red light beams into an optical needle of ~0.5λ in diameter and DOF > 10λ at WD = 428 µm. By integrating this SOL device with a commercial fluorescence microscope, we perform, for the first time, three-dimensional super-resolution multicolor fluorescence imaging of the "unseen" fine structures of neurons. The present study provides not only a practical route to far-field multicolor super-resolution imaging but also a viable approach for constructing imaging systems avoiding complex sample positioning and unfavorable photobleaching.
RESUMO
Moisture condensation, fogging, and frost or ice formation on structural surfaces cause severe hazards in many industrial components such as aircraft wings, electric power lines, and wind-turbine blades. Surface-acoustic-wave (SAW) technology, which is based on generating and monitoring acoustic waves propagating along structural surfaces, is one of the most promising techniques for monitoring, predicting, and also eliminating these hazards occurring on these surfaces in a cold environment. Monitoring condensation and frost/ice formation using SAW devices is challenging in practical scenarios including sleet, snow, cold rain, strong wind, and low pressure, and such a detection in various ambient conditions can be complex and requires consideration of various key influencing factors. Herein, the influences of various individual factors such as temperature, humidity, and water vapor pressure, as well as combined or multienvironmental dynamic factors, are investigated, all of which lead to either adsorption of water molecules, condensation, and/or frost/ice in a cold environment on the SAW devices. The influences of these parameters on the frequency shifts of the resonant SAW devices are systematically analyzed. Complemented with experimental studies and data from the literature, relationships among the frequency shifts and changes of temperature and other key factors influencing the dynamic phase transitions of water vapor on SAW devices are investigated to provide important guidance for icing detection and monitoring.
RESUMO
There is huge demand for recreating human skin with the functions of epidermis and dermis for interactions with the physical world. Herein, a biomimetic, ultrasensitive, and multifunctional hydrogel-based electronic skin (BHES) was proposed. Its epidermis function was mimicked using poly(ethylene terephthalate) with nanoscale wrinkles, enabling accurate identification of materials through the capabilities to gain/lose electrons during contact electrification. Internal mechanoreceptor was mimicked by interdigital silver electrodes with stick-slip sensing capabilities to identify textures/roughness. The dermis function was mimicked by patterned microcone hydrogel, achieving pressure sensors with high sensitivity (17.32 mV/Pa), large pressure range (20-5000 Pa), low detection limit, and fast response (10 ms)/recovery time (17 ms). Assisted by deep learning, this BHES achieved high accuracy and minimized interference in identifying materials (95.00% for 10 materials) and textures (97.20% for four roughness cases). By integrating signal acquisition/processing circuits, a wearable drone control system was demonstrated with three-degree-of-freedom movement and enormous potentials for soft robots, self-powered human-machine interaction interfaces of digital twins.
Assuntos
Aprendizado Profundo , Dispositivos Eletrônicos Vestíveis , Humanos , Hidrogéis , Biomimética , PeleRESUMO
Sub-diffraction-limit quasi-non-diffracting light sheets (SQLSs) are crucial for a resolution-enhanced and field of view (FOV)-enlarged light sheet microscope. However, it has aways been plagued by sidelobes inducing severe background noise. Here, a self-trade-off optimized method is proposed to generate sidelobe-suppressed SQLSs based on super-oscillatory lenses (SOLs). An SQLS thus obtained shows sidelobes of only 15.4%, first realizing the sub-diffraction-limit thickness, quasi-non-diffracting characteristic, and suppressed sidelobes simultaneously for static light sheets. Moreover, a window-like energy allocation is realized by the self-trade-off optimized method, successfully further suppressing the sidelobes. In particular, an SQLS with theoretical sidelobes of 7.6% is achieved within the window, which provides a new strategy to deal with sidelobes for light sheets and shows great potential in high signal-to-noise ratio light sheet microscopy (LSM).
RESUMO
Biomimetic riblet surfaces, such as blade, wavy, sinusoidal, and herringbone riblet surfaces, have widespread applications for drag reduction in the energy, transportation, and biomedicine industries. The drag reduction ability of a blade riblet surface is sensitive to the yaw angle, which is the angle between the design direction of the riblet surface and the average flow direction. In practical applications, the average flow direction is often misaligned with the design direction of riblet surfaces with different morphologies and arrangements. However, previous studies have not reported on the drag reduction characteristics and regularities related to the yaw angle for surfaces with complex riblet microstructures. For the first time, we systematically investigated the aerodynamic drag reduction characteristics of blade, wavy, sinusoidal, and herringbone riblet surfaces affected by different yaw angles. A precisely adjustable yaw angle measurement method was proposed based on a closed air channel. Our results revealed the aerodynamic behavior regularities of various riblet surfaces as affected by yaw angles and Reynolds numbers. Riblet surfaces with optimal air drag reduction were obtained in yaw angles ranging from 0 to 60° and Reynolds numbers ranging from 4000 to 7000. To evaluate the effects of the yaw angle, we proposed a criterion based on the actual spanwise spacing (d+) of microstructure surfaces with the same phase in a near-wall airflow field. Finally, we established conceptual models of aerodynamic behaviors for different riblet surfaces in response to changes in the airflow direction. Our research lays a foundation for practical various riblet surface applications influenced by yaw angles to reduce air drag.
Assuntos
Hidrodinâmica , Modelos TeóricosRESUMO
We propose a non-paraxial diffraction model of the digital micromirror device (DMD) by combining the conventional Fraunhofer diffraction and a simple method of coordinative mapping. It is equivalent to adding aberrations of diffracted wave fields to the aberration-free Fraunhofer diffraction instead of complex integral calculations, allowing the simulated diffraction patterns to be consistent with the actual experimental counterparts. Moreover, it is verified by the experiments and literature that the diffraction angles, orders, and efficiency can all be well predicted for arbitrary incident angles and wavelengths. Especially for diffracted zenith angles within 50°, the predicted values reveal â¼1% error, and in a broader range, the predicted errors of diffracted azimuth angles are less than 4%. To the best of our knowledge, it is the first model capable of describing the non-paraxial diffraction behavior of the DMD. The proposed model with universality and effectiveness will help users to optimally construct DMD-based optical systems by guiding optical layouts, selection of light sources, and utilization and suppression of diffraction effects.
RESUMO
Flexible superomniphobic doubly re-entrant (Dual-T) microstructures inspired by springtails have attracted growing attention due to their excellent liquid-repellent properties. However, the simple and practical manufacturing processes of the flexible Dual-T microstructures are urgently needed. Here, we proposed a one-step molding process coupled with the lithography technique to fabricate the elastomeric polydimethylsiloxane (PDMS) Dual-T microstructure surfaces with high uniformity. The angle between the downward overhang and the horizontal direction could reach 90° (vertical overhang). The flexible superomniphobic Dual-T microstructure surfaces, without fluorination treatment and physical treatments, could repel liquids with a surface tension lower than 20 mN m-1 in the Cassie-Baxter state. Owing to the excellent robustness of the one-step molding downward overhanging, the max breakthrough pressure of this surface could reach up to 164.3 Pa for ethanol droplets. Furthermore, the flexible superomniphobic Dual-T surface allowed impinging ethanol droplets to completely rebound at the Weber number up to 7.1 with an impact velocity of â¼0.32 m s-1. The Dual-T microstructure surface maintained excellent superomniphobicity even after surface oxygen plasma treatment and exhibited excellent structural robustness and recoverability to various large mechanical deformations.
RESUMO
Static light sheets are widely used in various super-resolution three-dimensional (3D) imaging applications. Here, a multifocal diffraction-free optimized design method is proposed for super-oscillatory lenses (SOLs) owning an enlarged field of view (FOV) to generate sub-diffraction-limit light sheets with reduced divergence. Various propagation lengths of sub-diffraction-limit thickness for light sheets can be obtained by adopting corresponding numbers of discrete foci and spacing between them. In particular, the propagation lengths of 150.4λ and 118.9λ are obtained by SOLs with an enlarged FOV of 150λ and 820λ, respectively, which show the longest depth of focus (DOF), as far as we know, and are the first to realize the combination of enlarged DOF and FOV for SOLs. We show a way of using binary-amplitude modulation to generate static light sheets with sub-diffraction-limit thickness and reduced divergence, which is simple, easy to integrate, and sidelobe-suppressed.
RESUMO
Lower stiffness can improve the performance of capacitive-based microelectromechanical systems sensors. In this paper, softened beams, achieved by the electrostatic assembly approach, are proposed to lower the stiffness of a capacitive MEMS accelerometer. The experiments show that the stiffness of the accelerometer is reduced by 43% with softened beams and the sensitivity is increased by 72.6%. As a result, the noise of the accelerometer is reduced to 26.2 µg/âHz with an improvement of 44.5%, and bias instability is reduced to 5.05 µg with an enhancement of 38.7%. The electrostatic assembly-based stiffness softening technique is proven to be effective and can be used in many types of MEMS devices.
RESUMO
Rapid advances in wearable electronics and mechno-sensational human-machine interfaces impose great challenges in developing flexible and deformable tactile sensors with high efficiency, ultra-sensitivity, environment-tolerance, and self-sustainability. Herein, a tactile hydrogel sensor (THS) based on micro-pyramid-patterned double-network (DN) ionic organohydrogels to detect subtle pressure changes by measuring the variations of triboelectric output signal without an external power supply is reported. By the first time of pyramidal-patterned hydrogel fabrication method and laminated polydimethylsiloxane (PDMS) encapsulation process, the self-powered THS shows the advantages of remarkable flexibility, good transparency (≈85%), and excellent sensing performance, including extraordinary sensitivity (45.97 mV Pa-1 ), fast response (≈20 ms), very low limit of detection (50 Pa) as well as good stability (36 000 cycles). Moreover, with the LiBr immersion treatment method, the THS possesses excellent long-term hyper anti-freezing and anti-dehydrating properties, broad environmental tolerance (-20 to 60 °C), and instantaneous peak power density of 20 µW cm-2 , providing reliable contact outputs with different materials and detecting very slight human motions. By integrating the signal acquisition/process circuit, the THS with excellent self-power sensing ability is utilized as a switching button to control electric appliances and robotic hands by simulating human finger gestures, offering its great potentials for wearable and multi-functional electronic applications.
Assuntos
Hidrogéis , Tato , Fontes de Energia Elétrica , Eletrônica , Humanos , PressãoRESUMO
Riblets inspired by shark skin exhibit a great air drag reduction potential in many industries, such as the aircraft, energy, and transportation industries. Many studies have reported that blade riblets attain the highest air drag reduction ability, with a current limit of â¼11%. Here, we propose multilayer hierarchical riblets (MLHRs) to further improve the air drag reduction ability. MLHRs were fabricated via a three-layer hybrid mask lithography method, and the air drag reduction ability was studied in a closed air channel. The experimental results indicated that the maximum air drag reduction achieved with MLHRs in the closed channel was 16.67%, which represents a 52% higher reduction than the highest previously reported. Conceptual models were proposed to explain the experiments from a microscopic perspective. MLHRs enhanced the stability of lifting and pinning vortices, while vortices gradually decelerated further, reducing the momentum exchange occurring near the wall. This verified that MLHRs overcome the current air drag reduction limit of riblets. The conceptual models lay a foundation to further improve the air drag reduction ability of riblets.
RESUMO
Ice accumulation causes great risks to aircraft, electric power lines, and wind-turbine blades. For the ice accumulation on structural surfaces, ice adhesion force is a crucial factor, which generally has two main sources, for exampple, electrostatic force and mechanical interlocking. Herein, we present that surface acoustic waves (SAWs) can be applied to minimize ice adhesion by simultaneously reducing electrostatic force and mechanical interlocking, and generating interface heating effect. A theoretical model of ice adhesion considering the effect of SAWs is first established. Experimental studies proved that the combination of nanoscale vibration and interface heating effects lead to the reduction of ice adhesion on the substrate. With the increase of SAW power, the electrostatic force decreases due to the increase of dipole spacings, which is mainly attributed to the SAW induced nanoscale surface vibration. The interface heating effect leads to the transition of the locally interfacial contact phase from solid-solid to solid-liquid, hence reducing the mechanical interlocking of ice. This study presents a strategy of using SAWs device for ice adhesion reduction, and results show a considerable potential for application in deicing.
RESUMO
Flexible, compact, lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles (UAVs). Hierarchical honeycomb has the unique merits of compact mesostructures, excellent energy absorption properties and considerable weight to strength ratios. Herein, a honeycomb-inspired triboelectric nanogenerator (h-TENG) is proposed for biomechanical and UAV morphing wing energy harvesting based on contact triboelectrification wavy surface of cellular honeycomb structure. The wavy surface comprises a multilayered thin film structure (combining polyethylene terephthalate, silver nanowires and fluorinated ethylene propylene) fabricated through high-temperature thermoplastic molding and wafer-level bonding process. With superior synchronization of large amounts of energy generation units with honeycomb cells, the manufactured h-TENG prototype produces the maximum instantaneous open-circuit voltage, short-circuit current and output power of 1207 V, 68.5 µA and 12.4 mW, respectively, corresponding to a remarkable peak power density of 0.275 mW cm-3 (or 2.48 mW g-1) under hand pressing excitations. Attributed to the excellent elastic property of self-rebounding honeycomb structure, the flexible and transparent h-TENG can be easily pressed, bent and integrated into shoes for real-time insole plantar pressure mapping. The lightweight and compact h-TENG is further installed into a morphing wing of small UAVs for efficiently converting the flapping energy of ailerons into electricity for the first time. This research demonstrates this new conceptualizing single h-TENG device's versatility and viability for broad-range real-world application scenarios.
RESUMO
Super-oscillatory lens (SOL) optical microscopy, behaving as a non-invasive and universal imaging technique, as well as being a simple post-processing procedure, may provide a potential application for sub-diffraction-limit fluorescence imaging. However, the low energy concentration, high-intensity sidelobes and micrometer-scale working distance of the reported planar SOLs impose unavoidable restrictions on the ground-state applications. Here, we demonstrate step-shaped SOLs based on the multiple-phase-modulated (MPM) method to improve the focusing efficiency. Two pivotal advantages are thus generated: (i) the fabrication complexity can be effectively reduced based on several conventional optical lithography steps; (ii) the focusing efficiency is much higher than that of the random MPM ones due to the efficient manipulation of the wavefronts, bringing about a stronger light concentration to the focal spot. Additionally, the ratio of the sidelobe intensity is flexibly tuned to meet the customized requirements, and a 2 mm-working-distance MPM SOL with the sidelobe intensity highly suppressed is finally exploited. For the first time, as far as we know, a SOL-based fluorescence microscopy without the pinhole filter to map the horizontal morphology of the dispersive fluorescent particles is established. Compared with the results achieved by the conventional wide-field microscopy, the sample details beating the diffraction limit can be reconstructed by simple imaging fusion. This research demonstrates the promising applications of SOLs for low-cost, simplified and highly customized sub-diffraction-limit fluorescence imaging systems free from photobleaching and an extremely short working distance.
RESUMO
One of the critical issues for electret/triboelectric devices is the poor charge viability and stability in humid environments. Herein, we propose a new origami-inspired "W-tube"-shaped triboelectric nanogenerator (W-TENG) with two thin-film electrets folded based on Miura-origami. The Miura-origami fold is capable of transforming flat materials with large surface areas into reduced and compressed complex 3D structures with parallelogram tessellations. The triboelectric power generation components can thus be hermetically sealed inside the "W-tube" to avoid contact with the external humid environment. Furthermore, the elastic nature of the Miura-origami fold endows the proposed W-TENG device with excellent deformability, flexibility, and stretchability. Therefore, it is capable of harvesting kinetic energy from various directions and forms of movement, including horizontal pressing, vertical tapping, and lateral bending. The compact, light weight, and self-rebounding properties of the origami structure also make it convenient for integration into wearable devices. Various parameters of the W-TENG are intensively investigated, including the number of power generation units, original height of the device, acceleration magnitude, excitation direction, and water-proof capability. Triggered by hand tapping impulse excitation in the horizontal and vertical directions, the instantaneous open-circuit voltages can reach 791 V and 116 V with remarkable optimum powers of 691 µW at 50 MΩ and 220 µW at 35 MΩ, respectively. The outcomes of this work demonstrate the fusion of the ancient art of origami, material science, and energy conversion techniques to realize flexible, multifunctional, and water-proof TENG devices.
RESUMO
Conventional optics suffer from the diffraction limit. Our recent work has predicted a nanoslit-based two-dimensional (2D) lens with transverse-electric (TE) polarized design that is capable of realizing the super-resolution focusing of light beyond the diffraction limit in the quasi-far field. Furthermore, the super-resolution capability can be kept in a high-refractive-index dielectric over a wide wavelength range from ultraviolet to visible light. Here, we systematically investigate the influence of various factors on the super-resolution focusing performance of the lens. Factors such as lens aperture, focal length and nanoslit length are considered. In particular, the influence of nanoslit length on lens focusing was ignored in the previous reports about nanoslit-based 2D lenses, since nanoslit length was assumed to be infinite. The numerical results using the finite-difference time-domain (FDTD) method demonstrate that the super-resolution focusing capability of a nanoslit-based 2D lens increases with the lens aperture and reduces with the increase of the lens focal length. On the other hand, it is notable that the length of the lens focus is not equal to but smaller than that of the nanoslits. Therefore, in order to achieve a desired focus length, a lens should be designed with longer nanoslits.
RESUMO
A zero-cross detection algorithm was proposed for the cavity-length interrogation of fiber-optic Fabry-Perot (FP) sensors. The method can avoid the inaccuracy of peak determination in the conventional peak-to-peak method for the cavity-length interrogation of fiber-optic FP sensors caused by the slow variation of the spectral power density in peak neighboring regions. Both simulations and experiments were carried out to investigate the feasibility and performance of the zero-cross detection algorithm. Fiber-optic FP sensors with cavity lengths in the range of 150-1000 µm were successfully interrogated with a maximum error of 0.083 µm.