The Potential of Xylooligosaccharides as Prebiotics and Their Sustainable Production from Agro-Industrial by-Products.

In recent years, concerns about a good-quality diet have increased. Food supplements such as prebiotics have great nutritional and health benefits. Within the diverse range of prebiotics, xylooligosaccharides (XOs) show high potential, presenting exceptional properties for the prevention of systemic disorders. XOs can be found in different natural sources; however, their production is limited. Lignocellulosic biomasses present a high potential as a source of raw material for the production of XOs, making the agro-industrial by-products the perfect candidates for production on an industrial scale. However, these biomasses require the application of physicochemical pretreatments to obtain XOs. Different pretreatment methodologies are discussed in terms of increasing the production of XOs and limiting the coproduction of toxic compounds. The advance in new technologies for XOs production could decrease their real cost (USD 25-50/kg) on an industrial scale and would increase the volume of market transactions in the prebiotic sector (USD 4.5 billion). In this sense, new patents and innovations are being strategically developed to expand the use of XOs as daily prebiotics.

Simultaneous reuse and treatment of sugar-sweetened beverage wastes for citric acid production.

This study aimed to evaluate the feasibility of using sugar-sweetened beverages (SSB) for citric acid (CA) production and its impact on chemical oxygen demand (COD) of SSB. Five types of SSB were used as a carbon source for CA production by A. niger, and the COD of each SSB was measured before and after the bioprocess. Results showed that all tested SSB were suitable for CA production, with maximum yields ranging from 13.01 to 56.62 g L- 1. The COD was reduced from 53 to 75.64%, indicating that the bioprocess effectively treated SSB wastes. The use of SSB as a substrate for CA production provides an alternative to traditional feedstocks, such as sugarcane and beet molasses. The low-cost and high availability of SSB makes it an attractive option for CA production. Moreover, the study demonstrated the potential of the bioprocess to simultaneously treat and reuse SSB wastes, reducing the environmental impact of the beverage industry. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05761-9.

Deciphering the blackbox of omics approaches and artificial intelligence in food waste transformation and mitigation.

It is necessary to stop the wastage of food during any stage of food chain to resolve the challenge of starvation, hunger and malnutrition in the world. Inception of modern techniques like omics (metagenomics, proteomics, transcriptomics, wasteomics, diseaseomics etc), enzymatic treatments, and artificial intelligence in food waste reduction and management can bring a sustainable solution for food loss management, starvation and environmental challenges. Acceptance of modern techniques while policies formulation by government bodies can substantially strengthen the idea of waste reduction, food security and can easily save the life of around 25,000 children and adults dying of starvation every day. Artificial Intelligence (AI) can bestead current agriculture and food supply chain system to overcome the challenges of nutrition demand, resource depletion, climate change, population growth, and pollution. This communication provides a thorough examination of the concept of food waste management with omics approaches linkages. In addition, the notion of artificial intelligence in food waste transformation and mitigation, as well as present challenges and future prospects have been covered. Overall, this communication would assist decision-makers in identifying economically and environmentally appropriate biorefinery solutions ahead of time.

Multi-product biorefinery from Arthrospira platensis biomass as feedstock for bioethanol and lactic acid production.

With the aim to reach the maximum recovery of bulk and specialty bioproducts while minimizing waste generation, a multi-product biorefinery for ethanol and lactic acid production from the biomass of cyanobacterium Arthrospira platensis was investigated. Therefore, the residual biomass resulting from different pretreatments consisting of supercritical fluid extraction (SF) and microwave assisted extraction with non-polar (MN) and polar solvents (MP), previously applied on A. platensis to extract bioactive metabolites, was further valorized. In particular, it was used as a substrate for fermentation with Saccharomyces cerevisiae LPB-287 and Lactobacillus acidophilus ATCC 43121 to produce bioethanol (BE) and lactic acid (LA), respectively. The maximum concentrations achieved were 3.02 ± 0.07 g/L of BE by the MN process at 120 rpm 30 °C, and 9.67 ± 0.05 g/L of LA by the SF process at 120 rpm 37 °C. An economic analysis of BE and LA production was carried out to elucidate the impact of fermentation scale, fermenter costs, production titer, fermentation time and cyanobacterial biomass production cost. The results indicated that the critical variables are fermenter scale, equipment cost, and product titer; time process was analyzed but was not critical. As scale increased, costs tended to stabilize, but also more product was generated, which causes production costs per unit of product to sharply decrease. The median value of production cost was US$ 1.27 and US$ 0.39, for BE and LA, respectively, supporting the concept of cyanobacterium biomass being used for fermentation and subsequent extraction to obtain ethanol and lactic acid as end products from A. platensis.

Designing enzyme cocktails from Penicillium and Aspergillus species for the enhanced saccharification of agro-industrial wastes.

The aim of this study was to develop optimized enzyme cocktails, containing native and recombinant purified enzymes from five fungal species, for the saccharification of alkali- and acid-pretreated sugarcane bagasse (SCB), soybean hulls (SBH) and oil palm empty fruit bunches (EFB). Basic cellulases were represented by cellobiohydrolase I (CBH) and endo-glucanase II (EG) from Penicillium verruculosum and ß-glucosidase (BG) from Aspergillus niger. Auxiliary enzymes were represented by endo-xylanase A (Xyl), pectin lyase (PNL) and arabinoxylanhydrolase (AXH) from Penicillium canescens, ß-xylosidase (BX) from Aspergillus japonicus, endo-arabinase (ABN) from A. niger and arabinofuranosidase (Abf) from Aspergillus foetidus. Enzyme loads were 5 mg protein/g dry substrate (basic cellulases) and 1 mg/g (each auxiliary enzyme). The best choice for SCB and EFB saccharification was alkaline pretreatment and addition of Xyl + BX, AXH + BX or ABN + BX + Abf to basic cellulases. For SBH, acid pretreatment and basic cellulases combined with ABN + BX + Abf or Xyl + BX performed better than other enzyme preparations.

Biohydrogen production in cassava processing wastewater using microbial consortia: Process optimization and kinetic analysis of the microbial community.

Biohydrogen production was evaluated using cassava processing wastewater (CPW) and two microbial consortia (Vir and Gal) from different Brazilian environments. The biohydrogen production was optimized using a Box-Behnken design (T, pH, C/N, and % v/v inoculum). Maximum yields were obtained with hydrolyzed substrate: 4.12 and 3.80 mol H2 / for Vir and Gal, respectively. Similarly, the kinetic parameters µ, k, and q were higher with hydrolyzed CPW in both consortia. The molecular analysis of the consortia through Illumina high-throughput sequencing showed the presence of bacteria from the families Porphyromonadaceae, Clostridiaceae, Ruminococcaceae, and Enterococcaceae. The relative abundance of microbial families varies as fermentation progresses. In both consortia, Clostridiaceae reached the maximum relative abundance in the media between 16 and 24 h, interval in which approximately 90% of the biohydrogen is generated.

Microalgal biomass pretreatment for integrated processing into biofuels, food, and feed.

Microalgae are sources of nutritional products and biofuels. However, their economical processing is challenging, because of (i) the inherently low concentration of biomass in algal cultures, below 0.5%, (ii) the high-water content in the harvested biomass, above 70%; and (iii) the variable intracellular content and composition. Cell wall structure and strength vary enormously among microalgae, from naked Dunaliella cells to robust Haematococcus cysts. High-value products justify using fast and energy-intensive processes, ranging from 0.23 kWh/kg dry biomass in high-pressure homogenization, to 6 kWh/kg dry biomass in sonication. However, in biofuels production, the energy input must be minimized, requiring slower, thermal or chemical pretreatments. Whichever the primary fraction of interest, the spent biomass can be processed into valuable by-products. This review discusses microalgal cell structure and composition, how it affects pretreatment, focusing on technologies tested for large scale or promising for industrial processes, and how these can be integrated into algal biorefineries.

Simultaneous cellulase production using domestic wastewater and bioprocess effluent treatment - A biorefinery approach.

The production of cellulases using domestic wastewater as an alternative culture medium and reducing the pollutant charge of the resultant effluents were assessed for the first time in this study. Cellulase production was carried out in a bubble column, column-packed bed and stirred tank reactors by Trichoderma harzianum. Maximum cellulase activity and productivity of 31 UFP/mL and 645 UFP/mL.h, respectively were achieved in the bubble column bioreactor system without immobilization. The fermented broth was microfiltrated and ultrafiltrated, leading to a cellulase recovery of 73.5% using a 30 kDa membrane and resulting in a 4.23-fold activity concentration. Chemical oxygen demand and nitrogen concentration were reduced 81.37% and 52.9%, respectively, showing great promise in producing cellulases using domestic wastewater with concomitant development of a medium- to-high added-value process and reduced environmental impact. These results contribute to the development of sustainable bioprocesses approaching a biorefinery concept.

Potential applications of plant probiotic microorganisms in agriculture and forestry.

Agriculture producers, pushed by the need for high productivity, have stimulated the intensive use of pesticides and fertilizers. Unfortunately, negative effects on water, soil, and human and animal health have appeared as a consequence of this indiscriminate practice. Plant probiotic microorganisms (PPM), also known as bioprotectants, biocontrollers, biofertilizers, or biostimulants, are beneficial microorganisms that offer a promising alternative and reduce health and environmental problems. These microorganisms are involved in either a symbiotic or free-living association with plants and act in different ways, sometimes with specific functions, to achieve satisfactory plant development. This review deals with PPM presentation and their description and function in different applications. PPM includes the plant growth promoters (PGP) group, which contain bacteria and fungi that stimulate plant growth through different mechanisms. Soil microflora mediate many biogeochemical processes. The use of plant probiotics as an alternative soil fertilization source has been the focus of several studies; their use in agriculture improves nutrient supply and conserves field management and causes no adverse effects. The species related to organic matter and pollutant biodegradation in soil and abiotic stress tolerance are then presented. As an important way to understand not only the ecological role of PPM and their interaction with plants but also the biotechnological application of these cultures to crop management, two main approaches are elucidated: the culture-dependent approach where the microorganisms contained in the plant material are isolated by culturing and are identified by a combination of phenotypic and molecular methods; and the culture-independent approach where microorganisms are detected without cultivating them, based on extraction and analyses of DNA. These methods combine to give a thorough knowledge of the microbiology of the studied environment.

Pharmacological Properties of Biocompounds from Spores of the Lingzhi or Reishi Medicinal Mushroom Ganoderma lucidum (Agaricomycetes): A Review.

Ganoderma lucidum is a well-known representative of mushrooms that have been used in traditional Chinese medicine for centuries. New discoveries related to this medicinal mushroom and its biological properties are frequently reported. However, only recently have scientists started to pay special attention to G. lucidum spores. This is in part because of the recent development of methods for breaking the spore wall and extracting biocompounds from the spore. Although some research groups are working with G. lucidum spores, data in the literature are still limited, and the methods used have not been systematized. This review therefore describes the main advances in techniques for breaking the spore wall and extracting biocompounds from the spore. In addition, the major active components identified and their biological properties, such as neurological activity and antiaging and cell-protective effects, are investigated because these are of importance for potential drug development.