Fluorescent probes based on N-CQDs: For direct detection of food additives STPP and Al3.

Sodium tripolyphosphate (STPP), as one of the many food additives, can cause gastrointestinal discomfort and a variety of adverse reactions when ingested by the human body, which is a great potential threat to human health. Therefore, it is necessary to develop a fast, sensitive and simple method to detect STPP in food. In this study, we synthesized a kind of nitrogen-doped carbon quantum dots (N-CQDs), and were surprised to find that the addition of STPP led to the gradual enhancement of the emission peaks of the N-CQDs, with a good linearity in the range of 0.067-1.96 µM and a low detection limit as low as 0.024 µM. Up to now, there is no report on the use of carbon quantum dots for the direct detection of STPP. Meanwhile, we found that the addition of Al3+ effectively bursts the fluorescence intensity of N-CQDs@STPP solution and has a good linear relationship in the range of 0.33-6.25 µM with a lower detection limit of 0.24 µM. To this end, we developed a fluorescent probe to detect STPP and Al3+. In addition, the probe was successfully applied to the detection of bread samples, which has great potential for practical application.

Highly fluorescent CdTe/ZnSe quantum dot-based "turn-off" sensor for the on-site rapid detection of Lead ions in aqueous medium.

Lead (Pb) is a heavy metal known for its adverse effects on both human health and the environment. In recent years, the industrial utilization of Pb2+ has surged, underscoring the imperative need for efficient measurement methods. In this study, a rapid and simple photochemical method was used to synthesize thioglycolic acid (TGA)-stabilized CdTe/ZnSe core-shell quantum dots (QDs). These CdTe/ZnSe QDs emit vibrant green fluorescence and exhibit remarkable quenching in the presence of Pb2+ ions. This property enables the development of an on-site on/off sensor without the necessity of additional modifications. The proposed sensor possesses an outstanding sensitivity to Pb2+, with a detection limit and linear range of 31.8 nM and 50 nM-10 µM, respectively. Importantly, the selectivity of this fluorescence-based sensor was validated by analyzing various positively and negatively charged ions. Furthermore, the developed sensor showed reliable performance against real river, agricultural, and tap water, as confirmed by Inductively Coupled Plasma (ICP) analysis. Additionally, CdTe/ZnSe QDs immobilized on glass slides were successfully employed for on-site water sample analysis, providing a versatile solution for environmental monitoring.

Construction of eco-friendly dual carbon dots ratiometric fluorescence probe for highly selective and efficient sensing mercury ion.

In present work, blue carbon dots (b-CDs) were derived from ammonium citrate and guanidine hydrochloride, and red carbon dots (r-CDs) were stemmed from malonate, ethylenediamine and meso­tetra (4-carboxyphenyl) porphin based on facile hydrothermal method. Eco-friendly ratiometric fluorescence probe was innovatively constructed to effectively measure Hg2+ utilizing b-CDs and r-CDs. The developed probe displayed two typical emission peaks at 450 nm from b-CDs and 650 nm from r-CDs under the excitation at 360 nm. Mercury ion has strong quenching effect on the fluorescence intensity at 450 nm due to the electron transfer process and the fluorescence change at 450 nm was used as the response signal, whereas the fluorescence intensity at 650 nm kept unchangeable which resulted from the chemical inertness between Hg2+ and r-CDs, serving as the reference signal in the sensing system. Under optimal circumstances, this probe exhibited an excellent linearity between the fluorescence response values of ΔF450/F650 and Hg2+ concentrations over range of 0.01-10 µmol/L, and the limit of detection was down to 5.3 nmol/L. Furthermore, this probe was successfully employed for sensing Hg2+ in practical environmental water samples with satisfied recoveries of 98.5%-105.0%. The constructed ratiometric fluorescent probe provided a rapid, environmental-friendly, reliable, and efficient platform for measuring trace Hg2+ in environmental field.

Multi-Stimuli-Responsive Carbon Dots with Intrinsic Photochromism and In Situ Radical Afterglow.

The combination of advanced photoluminescence characteristics to photochromism is highly attractive in preparing high-performance multifunctional photo-responsive materials for optoelectronic applications. However, this is rather challenging in material design owing to the limited mechanism understanding and construction principles. Here, an effective strategy to integrate photochromism and afterglow emission in carbon dots (CDs) is proposed through embedding naphthaleneimide (NI) structure in CDs followed by polyvinylpyrrolidone (PVP) encapsulation. The NI-structured CDs-PVP shows intrinsic photochromism owing to the in situ formation of NI-radical anions and controllable multi-stimuli-responsive afterglow behaviors related to the oxygen-trigged triplet exciton quenching and Förster resonance energy transfer (FRET) from the pristine CDs to the photoactivated CDs radicals. Notably, a wide range of appearance colors from colorless to brown, luminescence color transition from blue to yellow, and much elongated afterglow lifetime up to 253 ms are observed. With the extraordinary stimuli-chromic and stimuli-luminescent CDs-PVP film dynamically responsive to multiple external stimuli, reversible secure snapchat, data encryption/decryption and synaptic imaging recognition are realized. These findings demonstrate a fundamental principle to design multi-stimuli-responsive photochromic CDs with afterglow, providing important understandings on the synergic mechanism of dynamic photochromism and emission behaviors and thereby expanding their applications in advanced information anti-counterfeiting and artificial intelligence.

Yellow Emissive Carbon Dots - A Robust Nanoprobe for Highly Sensitive Quantification of Jaundice Biomarker and Mitochondria Targeting in Cancer Cells.

The abnormally high level of bilirubin (BR) in biofluids (human serum and urine) indicates a high probability of jaundice and liver dysfunction. However, quantification of BR as the Jaundice biomarker is difficult due to the interference of various biomolecules in serum and urine. To address this issue, we developed a fluorescence-based detection strategy, for which yellow emissive carbon dots (YCDs) were produced from a one-step solvothermal process using phloroglucinol and thionin acetate as chemical precursors. The as-fabricated YCDs exhibited a strong fluorescence peak at the wavelength of 542 nm upon excitation at 390 nm. We used YCDs for detecting BR through the fluorescence turn-off mechanism, unveiling the excellent sensitivity in the linear range of 0.5-12.5 µM with a limit of detection (LOD) of 9.62 nM, which was far below the clinically relevant range. The analytical nanoprobe also offered excellent detection specificity for quantifying BR in real samples. Moreover, the biocompatible fluorescent nanoprobe was successfully employed to target mitochondria in live cancer cells. A colocalization study confirmed that YCDs possessed the ability to target mitochondria and overlapped completely with MitoTracker Red. The developed nanoprobe of YCDs turned out to be straightforward in their synthesis, noninvasive, and can be utilized for biomedical sensors to diagnose the onset of jaundice as well as for mitochondria targeting.

Carbon Dots-Mediated Photodynamic Treatment Reduces Postharvest Senescence and Decay of Grapes by Regulating the Antioxidant System.

Grapes are susceptible to mold and decay during postharvest storage, and developing new technologies to extend their storage period has important application value. Photodynamic technology (PDT) in concurrence with carbon dots (CDs) proposes an innovative and eco-friendly preservation strategy. We examined the effects of carbon dots combined with photodynamic treatment on postharvest senescence and antioxidant system of table grape. The compounding of photodynamic technology with a 0.06 g L-1 CDs solution could possibly extend the postharvest storage period of grape berries. Through this strategy, we achieved a decreased rate of fruit rotting and weight loss alongside the delayed deterioration of fruit firmness, soluble solids, and titratable acid. As paired with photodynamic technology, CDs considerably decreased the postharvest storage loss of phenols, flavonoids, and reducing sugars as compared to the control group. Concurrently, it remarkably postponed the build-up of hydrogen peroxide (H2O2), superoxide anion (O2∙-), and malondialdehyde (MDA); elevated the levels of reduced ascorbic acid (AsA) and reduced glutathione (GSH); lowered the levels of dehydroascorbic acid (DHA) and oxidized glutathione (GSSG); raised the ratios of AsA/DHA and GSSH/GSSG; encouraged the activities of superoxide dismutase (SOD) and phenylalanine ammonia-lyase (PAL); and inhibited the activities of polyphenol oxidase (PPO) and lipoxygenase (LOX). Furthermore, it enhanced the iron reduction antioxidant capacity (FRAP) and DPPH radical scavenging capacity of grape berries. CDs combined with photodynamic treatment could efficiently lessen postharvest senescence and decay of grape berry while extending the storage time.

Graphene-PbS Quantum Dot Heterostructure for Broadband Photodetector with Enhanced Sensitivity.

Photodetectors converting light into electrical signals are crucial in various applications. The pursuit of high-performance photodetectors with high sensitivity and broad spectral range simultaneously has always been challenging in conventional semiconductor materials. Graphene, with its zero bandgap and high electron mobility, is an attractive candidate, but its low light absorption coefficient restricts its practical application in light detection. Integrating graphene with light-absorbing materials like PbS quantum dots (QDs) can potentially enhance its photodetection capabilities. Here, this work presents a broadband photodetector with enhanced sensitivity based on a graphene-PbS QD heterostructure. The device leverages the high carrier mobility of graphene and the strong light absorption of PbS QDs, achieving a wide detection range from ultraviolet to near-infrared. Employing a simple spinning method, the heterostructure demonstrates ultrahigh responsivity up to the order of 107 A/W and a specific detectivity on the order of 1013 Jones, showcasing significant potential for photoelectric applications.

Portable real-time determination of Escherichia coli O157:H7 and Staphylococcus aureus based on smartphones and hydrogels.

The aptamers functionalized orange-emission carbon dots (OCDs) and green-emission carbon dots (GCDs) had dual-emission peaks with single excitation. Tungsten disulfide nanosheets (WS2 NSs)-triggered fluorescence quenching achieved the ratiometric fluorescence determination of Escherichia coli O157:H7 (E. coli O157:H7) and Staphylococcus aureus (S. aureus) with wide ranges of 18-1.8 × 106 and 37-3.7 × 107 CFU/mL and low detection limits of 8 and 20 CFU/mL, respectively. The results in real sample with recoveries of 90-101 % and RSD < 4.12 % were no significant difference from standard plate counting method. Meanwhile, the dual-color CDs were further adopted in the smartphone-assisted hydrogel platform and achieved speedy, sensitive, portable and real-time determination of E. coli O157:H7 and S. aureus in real samples. This work has not only developed ratiometric fluorescence detection and constructed a portable hydrogel platform, but also provided a unique strategy in developing a time-efficient and easy-to-use portable device in food safety monitoring.

Mild near-infrared laser-triggered photo-immunotherapy potentiates immune checkpoint blockade via an all-in-one theranostic nanoplatform.

One of the primary challenges for immune checkpoint blockade (ICB)-based therapy is the limited infiltration of T lymphocytes (T cells) into tumors, often referred to as immunologically "cold" tumors. A promising strategy to enhance the anti-tumor efficacy of ICB is to increase antigen exposure, thereby enhancing T cell activation and converting "cold" tumors into "hot" ones. Herein, we present an innovative all-in-one therapeutic nanoplatform to realize local mild photothermal- and photodynamic-triggered antigen exposure, thereby improving the anti-tumor efficacy of ICB. This nanoplatform involves conjugating programmed death-ligand 1 antibody (aPD-L1) with gadolinium-doped near-infrared (NIR)-emitting carbon dots (aPD-L1@GdCDs), which displays negligible cytotoxicity in the absence of light. But under controlled NIR laser irradiation, the GdCDs produce combined photothermal and photodynamic effects. This not only results in tumor ablation but also induces immunogenic cell death (ICD), facilitating enhanced infiltration of CD8+ T cells in the tumor area. Importantly, the combination of aPD-L1 with photothermal and photodynamic therapies via aPD-L1@GdCDs significantly boosts CD8+ T cell infiltration, reduces tumor size, and improves anti-metastasis effects compared to either GdCDs-based phototherapy or aPD-L1 alone. In addition, the whole treatment process can be monitored by multi-modal fluorescence/photoacoustic/magnetic resonance imaging (FLI/PAI/MRI). Our study highlights a promising nanoplatform for cancer diagnosis and therapy, as well as paves the way to promote the efficacy of ICB therapy through mild photothermal- and photodynamic-triggered immunotherapy.

Paper-Based Fluorescent Sensor for Rapid Multi-Channel Detection of Tetracycline Based on Graphene Quantum Dots Coated with Molecularly Imprinted Polymer.

In this paper, we developed a paper-based fluorescent sensor using functional composite materials composed of graphene quantum dots (GQDs) coated with molecularly imprinted polymers (MIPs) for the selective detection of tetracycline (TC) in water. GQDs, as eco-friendly fluorophores, were chemically grafted onto the surface of paper fibers. MIPs, serving as the recognition element, were then wrapped around the GQDs via precipitation polymerization using 3-aminopropyltriethoxysilane (APTES) as the functional monomer. Optimal parameters such as quantum dot concentration, grafting time, and elution time were examined to assess the sensor's detection performance. The results revealed that the sensor exhibited a linear response to TC concentrations in the range of 1 to 40 µmol/L, with a limit of detection (LOD) of 0.87 µmol/L. When applied to spiked detection in actual water samples, recoveries ranged from 103.3% to 109.4%. Overall, this paper-based fluorescent sensor (MIPs@GQDs@PAD) shows great potential for portable, multi-channel, and rapid detection of TC in water samples in the future.

Nitrogen-doped carbon dots boost microbial electrosynthesis via efficient extracellular electron uptake of acetogens.

This study investigated the molecular mechanism behind the highly efficient performance of nitrogen-doped carbon dots (NCDs)-assisted microbial electrosynthesis systems (MESs). The impact of NCDs (C:N precursor = 1:0.5-1:3) on acetogens was examined in the biocathode. The highest electrocatalytic performance was observed with NCDs1:1. The maximum acetate production rate of 1.9 ± 0.1 mM d-1 was achieved in NCDs1:1-modified MESs, which was 26.7-216.7 % higher than other MESs (0.6-1.5 mM d-1). With NCDs1:1 modified, the biocathode exhibited a 129.3-186.8 % increase in the abundance of Sporomusa, and 38.5-104.6 % increase in cytochrome expression (cydAB, cybH). Transcriptome confirmed that cytochromes played a crucial role in the extracellular electron uptake (EEU) of NCDs1:1-modified Sporomusa. NCDs1:1 enhanced EEU efficiency, thereby increasing the two H+-pumping steps and accelerating microbial CO2 fixation. These results provide valuable insights into increasing CO2 fixation by maximizing EEU efficiency in acetogens.

Carbon Dots Employed for the Detection of Ranitidine and Elaborating the Detecting Mechanism.

Carbon dots (CDs) has been widely utilized in multiple fields, especially towards kinds of drug analyses, owing to its superior optical properties and satisfactory stability. Herein, we rapidly synthesized one kind of soluble bright-blue fluorescent CDs through a facile microwave method, while disodium ethylenediaminetetraacetic acid and phosphoric acid served as the raw materials. Importantly, introducing ranitidine into these CDs resulted in its decreased fluorescence, and thus an innovative method of detecting ranitidine was successfully established, which showed the favorable selectivity and anti-interference ability. With the optimal conditions, the standard curve diagram of F0/F against concentration of ranitidine was linear in the range of 6-2000 µM with a correlation coefficient of 0.9833, and the limit of detection (LOD) was calculated to be 4.2 µM. Meanwhile, we also explored the detecting mechanism of ranitidine by CDs, and elaborated that as the internal filtration effect. Consequently, we may broaden the avenues of detecting ranitidine on the basis of CDs.

Effects of Dislocation Filtering Layers on Optical Properties of Third Telecom Window Emitting InAs/InGaAlAs Quantum Dots Grown on Silicon Substrates.

Integrating light emitters based on III-V materials with silicon-based electronics is crucial for further increase in data transfer rates in communication systems since the indirect bandgap of silicon prevents its direct use as a light source. We investigate here InAs/InGaAlAs quantum dot (QD) structures grown directly on 5° off-cut Si substrate and emitting light at 1.5 µm, compatible with established telecom platform. Using different dislocation defect filtering layers, exploiting strained superlattices, and supplementary QD layers, we mitigate the effects of lattice constant and thermal expansion mismatches between III-V materials and Si during growth. Complementary optical spectroscopy techniques, i.e. photoreflectance and temperature-, time- and polarization-resolved photoluminescence, allow us to determine the optical quality and application potential of the obtained structures by comparing them to a reference sample-state-of-the-art QDs grown on InP. Experimental findings are supported by calculations of excitonic states and optical transitions by combining multiband k•p and configuration-interaction methods. We show that our design of structures prevents the generation of a considerable density of defects, as intended. The emission of Si-based structures appears to be much broader than for the reference dots, due to the creation of different QD populations which might be a disadvantage in particular laser applications, however, could be favorable for others, e.g., in broadly tunable devices, sensors, or optical amplifiers. Eventually, we identify the overall most promising combination of defect filtering layers and discuss its advantages and limitations and prospects for further improvements.

Carbon dots-based dual-mode sensor for highly selective detection of nitrite in food substrates through diazo coupling reaction.

As an antioxidant and preservative agent, nitrite (NO2-) plays an essential role in the food industry to maintain freshness or inhibit microbial growth. However, excessive addition of NO2- is detrimental to health, so accurate and portable detection of NO2- is critical for food quality control. Notably, the selectivity of most carbon dots (CDs)-based fluorescence sensors was not enough due to the nonspecific interaction mechanism of hydrogen bond, electrostatic interaction and inner filter effect etc. Herein, a novel fluorescence/UV-vis absorption (FL/UV-vis) dual-mode sensor was developed on basis of mC-CDs, which were prepared by simple solvothermal treatment of m-Phenylenediamine (m-PDA) and cyanidin cation (CC). The fluorescence of these mC-CDs could be selectively responded by NO2- through the specific diazo coupling reaction between NO2- and amino groups on the surface of mC-CDs, thus effectively improving the selectivity of NO2- detection. The CDs-based fluorescence sensor possessed a low detection limit of 0.091 µM and 0.143 µM for FL and UV-vis methods and the excellent linear range of 0.0-60.0 µM. Furthermore, the mC-CDs sensor was employed to detect NO2- in real samples with a recovery rate of 97.11 %-104.15 % for quantitative addition. Moreover, the smartphone-assisted fluorescence sensing platform developed could identify the subtle color changes that could not be distinguished by the naked eye, and had the advantages of fast detection speed and intelligence. More importantly, the portable solid phase sensor based on mC-CDs had been successfully applied to the specific fluorescence identification and concentration monitoring of NO2-. Accordingly, the designed sensor provided a new strategy for the highly selective and convenient sensing of NO2- in food substrates, and paved the way for the wide application of CDs-based nanomaterials in the detection of food safety.

An all-in-one smartphone-assisted ratiometric fluorescent device for visual and quantitative detection of glutathione.

The daily consumption of foods abundant in Glutathione (GSH) can be supplemented to maintain the homeostasis of GSH in human health and alleviate pathologies resulting from abnormal GSH levels. The fluorescence-based visual determination of GSH has gradually attracted the attention of researchers due to its robust performance and versatile implementation. However, the current GSH visual strategy primarily relies on variations in fluorescence intensity at a single emission wavelength, which poses challenges for naked-eye and portable readout, as well as distorted signals caused by complex matrix effects in real samples. Herein, a ratiometric fluorescence sensor based on carbon dots (CDs) combined with an all-in-one 3D-printed smartphone-based device was successfully developed for low-cost, visual and rapid detection of GSH without the need for an external excitation light source. The ratiometric fluorescent materials were synthesized by conjugating blue carbon dots (B-CDs) with yellow carbon dots (Y-CDs) through the utilization of selected Cu2+ ions. The resulting mechanism demonstrated that the coordination interaction between Cu2+ and residual aromatic amino groups in Y-CDs (Y-CDs-Cu2+) contributed to a newly emitted peak at 580 nm, thereby inducing fluorescence resonance energy transfer from B-CDs to Y-CDs-Cu2+. A linear correlation was found between GSH concentrations and R/B values in the range of 10-100 µM, with a limit of detection observed at 4.8 µM. By utilizing this portable device in combination with RGB analysis, the quantitative detection of GSH can be achieved even in complex food matrices such as tomatoes and grapes. The universality of this all-in-one device was further validated by pre-spraying CDs onto a paper strip for visual measurement of GSH. This work offers a portable, visual, and accessible approach to evaluating food safety and nutrition, thereby demonstrating significant economic value and holding profound implications for human health.

Applicability of Quantum Dots in Breast Cancer Diagnostic and Therapeutic Modalities-A State-of-the-Art Review.

The increasing incidence of breast cancers (BCs) in the world population and their complexity and high metastatic ability are serious concerns for healthcare systems. Despite the significant progress in medicine made in recent decades, the efficient treatment of invasive cancers still remains challenging. Chemotherapy, a fundamental systemic treatment method, is burdened with severe adverse effects, with efficacy limited by resistance development and risk of disease recurrence. Also, current diagnostic methods have certain drawbacks, attracting attention to the idea of developing novel, more sensitive detection and therapeutic modalities. It seems the solution for these issues can be provided by nanotechnology. Particularly, quantum dots (QDs) have been extensively evaluated as potential targeted drug delivery vehicles and, simultaneously, sensing and bioimaging probes. These fluorescent nanoparticles offer unlimited possibilities of surface modifications, allowing for the attachment of biomolecules, such as antibodies or proteins, and drug molecules, among others. In this work, we discuss the potential applicability of QDs in breast cancer diagnostics and treatment in light of the current knowledge. We begin with introducing the molecular and histopathological features of BCs, standard therapeutic regimens, and current diagnostic methods. Further, the features of QDs, along with their uptake, biodistribution patterns, and cytotoxicity, are described. Based on the reports published in recent years, we present the progress in research on possible QD use in improving BC diagnostics and treatment efficacy as chemotherapeutic delivery vehicles and photosensitizing agents, along with the stages of their development. We also address limitations and open questions regarding this topic.

Ratiometric Fluorescent pH Sensing with Carbon Dots: Fluorescence Mapping across pH Levels for Potential Underwater Applications.

Ocean acidification has become a major climate change concern requiring continuous observation. Additionally, in the industry, pH surveillance is of great importance. Consequently, there is a pressing demand to develop robust and inexpensive pH sensors. Ratiometric fluorescence pH sensing stands out as a promising concept. The application of carbon dots in fluorescent sensing presents a compelling avenue for the advancement of pH-sensing solutions. This potential is underpinned by the affordability of carbon dots, their straightforward manufacturing process, low toxicity, and minimal susceptibility to photobleaching. Thus, investigating novel carbon dots is essential to identify optimal pH-sensitive candidates. In this study, five carbon dots were synthesized through a simple solvothermal treatment, and their fluorescence was examined as a function of pH within the range of 5-9, across an excitation range of 200-550 nm and an emission range of 250-750 nm. The resulting optical features showed that all five carbon dots exhibited pH sensitivity in both the UV and visible regions. One type of carbon dot, synthesized from m-phenylenediamine, displayed ratiometric properties at four excitation wavelengths, with the best results observed when excited in the visible spectrum at 475 nm. Indeed, these carbon dots exhibited good linearity over pH values of 6-9 in aqueous Carmody buffer solution by calculating the ratio of the green emission band at 525 nm to the orange one at 630 nm (I525nm/I630nm), demonstrating highly suitable properties for ratiometric sensing.

Research on CdSe/ZnS Quantum Dots-Doped Polymer Fibers and Their Gain Characteristics.

Polymer fibers are considered ideal transmission media for all-optical networks, but their high intrinsic loss significantly limits their practical use. Quantum dot-doped polymer fiber amplifiers are emerging as a promising solution to this issue and are becoming a significant focus of research in both academia and industry. Based on the properties of CdSe/ZnS quantum dots and PMMA material, this study experimentally explores three fabrication methods for CdSe/ZnS quantum dots-doped PMMA fibers: hollow fiber filling, melt-drawing, and melt extrusion. The advantages and disadvantages of each method and key issues in fiber fabrication are analyzed. Utilizing the CdSe/ZnS quantum dots-doped PMMA fibers that were fabricated, we theoretically analyzed the key factors affecting gain performance, including fiber length, quantum dots doping concentration, and signal light intensity. Under the conditions of 1.5 W power and 445 nm laser pumping, a maximum on-off gain of 16.2 dB was experimentally achieved at 635 nm. Additionally, using a white light LED as the signal source, a broadband on-off gain with a bandwidth exceeding 70 nm and a maximum gain of 12.4 dB was observed in the 580-650 nm range. This research will contribute to the development of quantum dots-doped fiber devices and broadband optical communication technology, providing more efficient solutions for future optical communication networks.

Tuberculosis patients' satisfaction with directly observed treatment short course strategy and associated factors in Southern Ethiopia: a mixed method study.

BACKGROUND: Tuberculosis (TB) is a second major global public health problem and the leading infectious cause of death in Ethiopia. Patients under directly observed treatment short-courses (DOTs) have a higher treatment success rate and reduced drug resistance. A successful treatment outcome and adherence to the treatment are related to patient satisfaction with the DOT strategy. Client satisfaction is one of the indicators of the quality of care. In this perspective, there were limited studies in Ethiopia related to patient satisfaction with the DOTs strategy in the prevention and control of TB to achieve the ''END TB Strategy.'' Therefore, this study was aimed at identifying the TB patients' satisfaction with the DOTs strategy and associated factors in Gamo Zone, Southern Ethiopia. METHODS: An institutional-based cross-sectional study design for quantitative data and a phenomenological approach were employed for qualitative data. The calculated sample size was 374. A systematic random sampling method was used to select study participants. A pre-tested structured interviewer-administered questionnaire for quantitative data and focus group discussions (FGDs) for qualitative data were used for data collection. Bivariable and multivariable analyses were used. The determinants with a p-value < 0.05 were declared to have a significant association with the outcome variable, and an adjusted odd ratio with a 95% confidence interval (CI) was used. RESULTS: A total of 358 patients participated in the study, with a response rate of 95.72%. The majority of study participants' ages ranged between 25 and 34 years. The tuberculosis DOT satisfaction rate was 61.17% [56.10-66.25%, 95%CI]. The TB patients who took treatment for 20 weeks or more were 3.97 times [AOR = 3.97; 95% CI (1.55-10.16)] more likely to be satisfied with the DOTs service provided. However, the participants who perceived transport costs as high were 79% [AOR = 0.21; 95% CI (0.06-0.71)] less likely to be satisfied with DOTs. Qualitatively, the participants reported that there was a major problem with laboratory services, which resulted in delays and long appointments to get the results in addition to lack of clean toilets and safe water to swallow medications. CONCLUSION: The satisfaction rate for tuberculosis DOTs observed in this study appears to be relatively lower in comparison to other studies. Availing DOTs service nearby patients to enhance the accessibility of the service is crucial to improving patients' satisfaction with DOTs service. Reducing laboratory result delays by improving laboratory service is essential to enhancing patients' satisfaction with DOTs. Moreover, improving toilet services, and availing safe water to swallow medications is recommended to enhancing patients' satisfaction with DOTs service.

Platinum-based fluorescent nanozyme-driven "loong frolic pearls" multifunctional nanoplatform for tri-mode ultrasensitive detection and synergistic sterilization of Burkholderia gladioli.

Rapid and accurate detection of Burkholderia gladioli (B. gladioli) and effective sterilization are crucial for ensuring food safety. Hence, a novel "loong frolic pearls" platform based on platinum-based fluorescent nanozymes (Pt-OCDs) and strand exchange amplification (SEA) was reported. Magnetic nanoparticles were modified on primer SEAF, while Pt-OCDs were covalently coupled with primer SEA-R. The highly efficient amplification capability of SEA permitted the accumulation of a large number of double-labeled amplicons. After magnetic adsorption, the supernatant was detected in reverse direction to collect colorimetric-fluorescence-photothermal signal values, enabling ultra-precise detection within 1 h. Furthermore, the Pt-based multifunctional nanoplatform generated abundant •OH and 1O2, which synergistically attacked B. gladioli and its biofilm, resulting in significant bactericidal efficacy within 30 min. This "triple-detection and double-sterilization" platform has been successfully applied in the field of food analysis with good recovery rates and immediate control over B. gladioli, thus demonstrating promising prospects for broad applications.