A Compact Wearable Textile Antenna for NB-IoT and ISM Band Patient Tracking Applications.

This paper proposes a novel multi-band textile monopole antenna for patient tracking applications. The designed antenna has compact footprints (0.13λ02) and works in the narrow band-internet of things (NB-IoT) 1.8 GHz, radio frequency identification (RFID), and industrial, scientific, and medical (ISM) 2.45 GHz and 5.8 GHz bands. The impedance bandwidths and gain of the antenna at 1.8 GHz, 2.45 GHz, and 5.8 GHz are 310 MHz, 960 MHz, and 1140 MHz; 3.7 dBi, 5.3 dBi, and 9.6 dBi, respectively. Also, the antenna's behavior is checked on different body parts of the human body in various bending scenarios. As per the evaluated link budget, the designed antenna can easily communicate up to 100 m of distance. The specific absorption rate values of the designed antenna are also within acceptable limits as per the (FCC/ICNIRP) standards at the reported frequency bands. Unlike traditional rigid antennas, the proposed textile antenna is non-intrusive, enhancing user safety and comfort. The denim material makes it comfortable for extended wear, reducing the risk of skin irritation. It can also withstand regular wear and tear, including stretching and bending. The presented denim-based antenna can be seamlessly integrated into clothing and accessories, making it less obtrusive and more aesthetically pleasing.

Collateral flow and pulsatility during large vessel occlusions: insights from a quantitative in vitro study.

Acute ischemic stroke caused by large vessel occlusions is being increasingly treated with neurovascular interventions. The hemodynamics within the collateral system of the circle of Willis (CoW) hemodynamics play a fundamental role in therapy success. However, transient in vivo data on pathological collateral flow during large vessel occlusions are not available. Moreover, there are no flow models that accurately simulate the hemodynamic conditions in the CoW during large vessel occlusions. We used a circulatory loop to generate highly reproducible cerebrovascular-like flows and pressures and used non-invasive flow visualization and high-resolution flow and pressure measurements to acquire detailed, time-dependent hemodynamics inside an anatomical phantom of the CoW. After calibrating a physiological reference case, we induced occlusions in the 1. middle cerebral artery, 2. terminal carotid artery, and 3. basilar artery; and measured the left posterior communicating artery flow. Mean arterial pressure and pulse pressure remained unchanged in the different occlusion cases compared to the physiological reference case, while total cerebral flow decreased by up to 19%. In all three occlusion cases, reversed flow was found in the left posterior communicating artery compared to the reference case with different flow magnitudes and pulsatility index values. The experimental results were compared with clinical findings, demonstrating the capability of this realistic cerebrovascular flow setup. This novel cerebrovascular flow setup opens the possibility for investigating different topics of neurovascular interventions under various clinical conditions in controlled preclinical laboratory studies.

Do-It-Yourself Ultrasonography Phantom Model for Improving Hand Skills: A Technical Report.

This technical report focuses on developing a do-it-yourself (DIY) model of a water phantom for training in ultrasound-guided needle insertion techniques. Ultrasound technology is becoming more widely used in perioperative and intensive care settings. However, accurate needle placement using ultrasound guidance necessitates strong spatial reasoning and hand-eye coordination. To address this, the authors experimented with a water phantom model that is cost-effective, easily accessible, and efficient for training. The DIY water phantom was made using materials such as an examination glove, a used vial rubber cap, water, adhesive tape, sealing glue, and a target object. This technical report discusses the process of assembling the water phantom and the potential benefits it offers for ultrasound training.

The Effect of Partial Electrical Insulation of the Tip and Active Needle Length of Monopolar Irreversible Electroporation Electrodes on the Electric Field Line Pattern and Temperature Gradient to Improve Treatment Control.

Unintentional local temperature effects can occur during irreversible electroporation (IRE) treatment, especially near the electrodes, and most frequently near the tip. Partial electrical insulation of the IRE electrodes could possibly control these temperature effects. This study investigated and visualized the effect of partial electrical insulation applied to the IRE electrodes on the electric field line pattern and temperature gradient. Six designs of (partial) electrical insulation of the electrode tip and/or active needle length (ANL) of the original monopolar 19G IRE electrodes were investigated. A semolina in castor oil model was used to visualize the electric field line pattern in a high-voltage static electric field. An optical method to visualize a change in temperature gradient (color Schlieren) was used to image the temperature development in a polyacrylamide gel. Computational models were used to support the experimental findings. Around the electrode tip, the highest electric field line density and temperature gradient were present. The more insulation was applied to the electrodes, the higher the resistance. Tip and ANL insulation together reduced the active area of and around the electrodes, resulting in a visually enlarged area that showed a change in temperature gradient. Electrically insulating the electrode tip together with an adjustment in IRE parameter settings could potentially reduce the uncontrollable influence of the tip and may improve the predictability of the current pathway development.

Effects of Blood Pressure on Brain Tissue Pulsation Amplitude in a Phantom Model.

OBJECTIVE: The precise mechanism and determinants of brain tissue pulsations (BTPs) are poorly understood, and the impact of blood pressure (BP) on BTPs is relatively unexplored. This study aimed to explore the relationship between BP parameters (mean arterial pressure [MAP] and pulse pressure [PP]) and BTP amplitude, using a transcranial tissue Doppler prototype. METHODS: A phantom brain model generating arterial-induced BTPs was developed to observe BP changes in the absence of confounding variables and cerebral autoregulation feedback processes. A regression model was developed to investigate the relationship between bulk BTP amplitude and BP. The separate effects of PP and MAP were evaluated and quantified. RESULTS: The regression model (R2 = 0.978) revealed that bulk BTP amplitude measured from 27 gates significantly increased with PP but not with MAP. Every 1 mm Hg increase in PP resulted in a bulk BTP amplitude increase of 0.29 µm. CONCLUSION: Increments in BP were significantly associated with increments in bulk BTP amplitude. Further work should aim to confirm the relationship between BP and BTPs in the presence of cerebral autoregulation and explore further physiological factors having an impact on BTP measurements, such as cerebral blood flow volume, tissue distensibility and intracranial pressure.

Radiotherapy planning in a prostate cancer phantom model with intraprostatic dominant lesions using stereotactic body radiotherapy with volumetric modulated arcs and a simultaneous integrated boost.

Aim: In the treatment of prostate cancer with radiation therapy, the addition of a simultaneous integrated boost (SIB) to the dominant intraprostatic lesions (DIL) may improve local control. In this study, we aimed to determine the optimal radiation strategy in a phantom model of prostate cancer using volumetric modulated arc therapy for stereotactic body radiotherapy (SBRT-VMAT) with a SIB of 1-4 DILs. Methods: We designed and printed a three-dimensional anthropomorphic phantom pelvis to simulate individual patient structures, including the prostate gland. A total of 36.25 Gy (SBRT) was delivered to the whole prostate. The DILs were irradiated with four different doses (40, 45, 47.5, and 50 Gy) to assess the influence of different SIB doses on dose distribution. The doses were calculated, verified, and measured using both transit and non-transit dosimetry for patient-specific quality assurance using a phantom model. Results: The dose coverage met protocol requirements for all targets. However, the dose was close to violating risk constraints to the rectum when four DILs were treated simultaneously or when the DILs were located in the posterior segments of the prostate. All verification plans passed the assumed tolerance criteria. Conclusions: Moderate dose escalation up to 45 Gy seems appropriate in cases with DILs located in posterior prostate segments or if there are three or more DILs located in other segments.

Optimization of 4D Flow MRI Spatial and Temporal Resolution for Examining Complex Hemodynamics in the Carotid Artery Bifurcation.

BACKGROUND: Three-dimensional, ECG-gated, time-resolved, three-directional, velocity-encoded phase-contrast MRI (4D flow MRI) has been applied extensively to measure blood velocity in great vessels but has been much less used in diseased carotid arteries. Carotid artery webs (CaW) are non-inflammatory intraluminal shelf-like projections into the internal carotid artery (ICA) bulb that are associated with complex flow and cryptogenic stroke. PURPOSE: Optimize 4D flow MRI for measuring the velocity field of complex flow in the carotid artery bifurcation model that contains a CaW. METHODS: A 3D printed phantom model created from computed tomography angiography (CTA) of a subject with CaW was placed in a pulsatile flow loop within the MRI scanner. 4D Flow MRI images of the phantom were acquired with five different spatial resolutions (0.50-2.00  mm3) and four different temporal resolutions (23-96 ms) and compared to a computational fluid dynamics (CFD) solution of the flow field as a reference. We examined four planes perpendicular to the vessel centerline, one in the common carotid artery (CCA) and three in the internal carotid artery (ICA) where complex flow was expected. At these four planes pixel-by-pixel velocity values, flow, and time average wall shear stress (TAWSS) were compared between 4D flow MRI and CFD. HYPOTHESIS: An optimized 4D flow MRI protocol will provide a good correlation with CFD velocity and TAWSS values in areas of complex flow within a clinically feasible scan time (~ 10 min). RESULTS: Spatial resolution affected the velocity values, time average flow, and TAWSS measurements. Qualitatively, a spatial resolution of 0.50  mm3 resulted in higher noise, while a lower spatial resolution of 1.50-2.00  mm3 did not adequately resolve the velocity profile. Isotropic spatial resolutions of 0.50-1.00  mm3 showed no significant difference in total flow compared to CFD. Pixel-by-pixel velocity correlation coefficients between 4D flow MRI and CFD were > 0.75 for 0.50-1.00  mm3 but were < 0.5 for 1.50 and 2.00  mm3. Regional TAWSS values determined from 4D flow MRI were generally lower than CFD and decreased at lower spatial resolutions (larger pixel sizes). TAWSS differences between 4D flow and CFD were not statistically significant at spatial resolutions of 0.50-1.00  mm3 but were different at 1.50 and 2.00 mm3. Differences in temporal resolution only affected the flow values when temporal resolution was > 48.4 ms; temporal resolution did not affect TAWSS values. CONCLUSION: A spatial resolution of 0.74-1.00  mm3 and a temporal resolution of 23-48 ms (1-2 k-space segments) provides a 4D flow MRI protocol capable of imaging velocity and TAWSS in regions of complex flow within the carotid bifurcation at a clinically acceptable scan time.

Validating Homogeneity for a Novel 3-Dimensional Tissue Phantom Modeling System of the Human Maxilla.

Silicon phantom models have been utilized to calculate light fluence in patients being treated with Photodynamic Therapy (PDT). This application can be utilized for other non-ionizing wavelength therapies such as Photobiomodulation (PBM). We have developed a novel protocol to validate homogeneity for 3-dimensional silicon phantom models of the human maxilla. Accurately quantifying the light profiles of human tissue can accommodate for varying optical properties that occur between subjects. More importantly, this can help optimize light fluence dosimetry calculations to achieve intended results. Silicon models of identical composition were fabricated into two different shapes: 1 flat-planar cylindrical shaped model, 2) non-flat planar (3-dimensional) mold of the human maxilla. Fabricating homogenous silicon phantom models continues to be a challenge as micro-bubbles can contaminate the compound during the curing process. Integrating both proprietary CBCT and handheld surface acquisition imaging devices confirmed our results to be within 0.5mm of accuracy. This protocol was specifically used to cross-reference and validate homogeneity at various depths of penetration. These results present the first known successful validation of identical silicon tissue phantoms with a flat-planar surface vs. a non-flat 3D planar surface. This proof-of-concept phantom validation protocol is sensitive to the specific variations of 3-dimensional surfaces and can be applied to a workflow used to capture accurate light fluence calculations in the clinical setting.

PDT Light Fluence Phantom Modeling of the Human Pleural Cavity: A Proof-of-Concept Pre-Clinical Study.

We have developed a novel scanning protocol for a life-sized human phantom model using handheld three-dimensional (3D) surface acquisition devices. This technology will be utilized to develop light fluence modeling of the internal pleural cavity space during Photodynamic Therapy (PDT) of malignant mesothelioma. The external aspect of the chest cavity phantom was prefabricated of a hardened synthetic polymer resembling ordinary human anatomy (pleural cavity space) and the internal aspect remained hollow without any characterizations. Both surfaces were layered with non-reflective adhesive paper to create non-uniformed surface topographies. These surface characteristics were established in randomized X-Y-Z coordinates ranging in dimensions from 1-15mm. This protocol utilized the handheld Occipital Scanner and the MEDIT i700. The Occipital device required a minimum scanner-to-surface distance of 24cm and the MEDIT device 1cm respectively. The external and internal aspects of the phantom model were successfully scanned acquiring digital measurements in actual value and converted into a digital image file. The initial surface rendering was acquired by the Occipital device and applied with proprietary software to guide the MEDIT device to fill voided areas. This protocol is accompanied by a visualization tool that allows for real-time inspection of surface acquisition in 2D and 3D. This scanning protocol can be utilized to scan the pleural cavity for real-time guidance for light fluence modeling during PDT, which will be expanded to ongoing clinical trials.

The Influence of Irreversible Electroporation Parameters on the Size of the Ablation Zone and Thermal Effects: A Systematic Review.

Introduction: The aim of this study was to review the effect of irreversible electroporation parameter settings on the size of the ablation zone and the occurrence of thermal effects. This insight would help to optimize treatment protocols and effectively ablate a tumor while controlling the occurrence of thermal effects. Methods: Various individual studies report the influence of variation in electroporation parameters on the ablation zone size or occurrence of thermal effects. However, no connections have yet been established between these studies. With the aim of closing the gap in the understanding of and personalizing irreversible electroporation parameter settings, a systematic review was performed according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines. A quality assessment was performed using an in-house developed grading tool based on components of commonly used grading domains. Data on the electroporation parameters voltage, number of electrodes, inter-electrode distance, active needle length, pulse length/number/protocol/frequency, and pulse interval were extracted. Ablation zone size and temperature data were grouped per parameter. Spearman correlation and linear regression were used to define the correlation with outcome measures. Results: A total of 7661 articles were screened, of which 18 preclinical studies (animal and phantom studies) met the inclusion criteria. These studies were graded as moderate (4/18) and low (14/18) quality. Only the applied voltage appeared to be a significant linear predictor of ablation zone size: length, surface, and volume. The pulse number was moderately but nonlinearly correlated with the ablation zone length. Thermal effects were more likely to occur for higher voltages (≥2000 V), higher number of electrodes, and increased active needle length. Conclusion: Firm conclusions are limited since studies that investigated and precisely reported the influence of electroporation parameters on the ablation zone size and thermal effects were scarce and mostly graded low quality. High-quality studies are needed to improve the predictability of the combined effect of variation in parameter combinations and optimize irreversible electroporation treatment protocols.

Development of a dynamic myocardial perfusion phantom model for tracer kinetic measurements.

BACKGROUND: Absolute myocardial perfusion imaging (MPI) is beneficial in the diagnosis and prognosis of patients with suspected or known coronary artery disease. However, validation and standardization of perfusion estimates across centers is needed to ensure safe and adequate integration into the clinical workflow. Physical myocardial perfusion models can contribute to this clinical need as these can provide ground-truth validation of perfusion estimates in a simplified, though controlled setup. This work presents the design and realization of such a myocardial perfusion phantom and highlights initial performance testing of the overall phantom setup using dynamic single photon emission computed tomography. RESULTS: Due to anatomical and (patho-)physiological representation in the 3D printed myocardial perfusion phantom, we were able to acquire 22 dynamic MPI datasets in which 99mTc-labelled tracer kinetics was measured and analyzed using clinical MPI software. After phantom setup optimization, time activity curve analysis was executed for measurements with normal myocardial perfusion settings (1.5 mL/g/min) and with settings containing a regional or global perfusion deficit (0.8 mL/g/min). In these measurements, a specific amount of activated carbon was used to adsorb radiotracer in the simulated myocardial tissue. Such mimicking of myocardial tracer uptake and retention over time satisfactorily matched patient tracer kinetics. For normal perfusion levels, the absolute mean error between computed myocardial blood flow and ground-truth flow settings ranged between 0.1 and 0.4 mL/g/min. CONCLUSION: The presented myocardial perfusion phantom is a first step toward ground-truth validation of multimodal, absolute MPI applications in the clinical setting. Its dedicated and 3D printed design enables tracer kinetic measurement, including time activity curve and potentially compartmental myocardial blood flow analysis.

An in vitro Assessment of the Haemodynamic Features Occurring Within the True and False Lumens Separated by a Dissection Flap for a Patient-Specific Type B Aortic Dissection.

One of the highest mortality rates of cardiovascular diseases is aortic dissections with challenging treatment options. Currently, less study has been conducted in developing in vitro patient-specific Type B aortic dissection models, which mimic physiological flow conditions along the true and false lumens separated by a dissection flap with multiple entry and exit tears. A patient-specific Stanford Type B aortic dissection scan was replicated by an in-house manufactured automatic injection moulding system and a novel modelling technique for creating the ascending aorta, aortic arch, and descending aorta incorporating arterial branching, the true/false lumens, and dissection flap with entry and exit intimal tears. The physiological flowrates and pressure values were monitored, which identified jet stream fluid flows entering and exiting the dissection tears. Pressure in the aorta's true lumen region was controlled at 125/85 mmHg for systolic and diastolic values. Pressure values were obtained in eight sections along the false lumen using a pressure transducer. The true lumen systolic pressure varied from 122 to 128 mmHg along the length. Flow patterns were monitored by ultrasound along 12 sections. Detailed images obtained from the ultrasound transducer probe showed varied flow patterns with one or multiple jet steam vortices along the aorta model. The dissection flap movement was assessed at four sections of the patient-specific aorta model. The displacement values of the flap varied from 0.5 to 3 mm along the model. This model provides a unique insight into aortic dissection flow patterns and pressure distributions. This dissection phantom model can be used to assess various treatment options based on the surgical, endovascular, or hybrid techniques.

A novel tissue-mimicking phantom for US/CT/MR-guided tumor puncture and thermal ablation.

AIM: This study aimed to develop a novel tumor-bearing tissue phantom model that can be used for US/CT/MR-guided tumor puncture and thermal ablation. METHODS: The phantom model comprised two parts: a normal tissue-mimicking phantom and a tumor-mimicking phantom. A normal tissue phantom was prepared based on a polyacrylamide gel mixed with thermochromic ink. Moreover, a spherical phantom containing contrast agents was constructed and embedded in the tissue phantom to mimic a tumor lesion. US/CT/MR imaging features and thermochromic property of the phantom model were characterized. Finally, the utility of the phantom model for imaging-guided microwave ablation training was examined. RESULTS: The tumor phantom containing contrast agents showed hyper-echogenicity, higher CT numbers, and lower T2 signal intensity compared with the normal tissue phantom in US/CT/MR images. Consequently, we could locate the position of the tumor in US/CT/MR imaging and perform an imaging-guided tumor puncture. When the temperature reached the threshold of 60 °C, the phantom exhibited a permanent color change from cream white to magenta. Based on this obvious color change, our phantom model could clearly map the thermal ablation region after thermotherapy. CONCLUSIONS: We developed a novel US/CT/MR-imageable tumor-bearing tissue model that can be used for imaging-guided tumor puncture and thermal ablation. Furthermore, it allows visual assessment of the ablation region by analyzing the obvious color change. Overall, this phantom model could be a good training tool in the field of thermal ablation.

A novel endoimaging system for endoscopic 3D reconstruction in bladder cancer patients.

INTRODUCTION: The methods employed to document cystoscopic findings in bladder cancer patients lack accuracy and are subject to observer variability. We propose a novel endoimaging system and an online documentation platform to provide post-procedural 3D bladder reconstructions for improved diagnosis, management and follow-up. MATERIAL AND METHODS: The RaVeNNA4pi consortium is comprised of five industrial partners, two university hospitals and two technical institutes. These are grouped into hardware, software and clinical partners according to their professional expertise. The envisaged endoimaging system consists of an innovative cystoscope that generates 3D bladder reconstructions allowing users to remotely access a cloud-based centralized database to visualize individualized 3D bladder models from previous cystoscopies archived in DICOM format. RESULTS: Preliminary investigations successfully tracked the endoscope's rotational and translational movements. The structure-from-motion pipeline was tested in a bladder phantom and satisfactorily demonstrated 3D reconstructions of the processing sequence. AI-based semantic image segmentation achieved a 0.67 dice-score-coefficient over all classes. An online-platform allows physicians and patients to digitally visualize endoscopic findings by navigating a 3D bladder model. CONCLUSIONS: Our work demonstrates the current developments of a novel endoimaging system equipped with the potential to generate 3D bladder reconstructions from cystoscopy videos and AI-assisted automated detection of bladder tumors.

Ultrasound-mediated in vivo biodistribution of coumarin-labeled sorafenib-loaded liposome-based nanotheranostic system.

Aim: This study aimed to synthesize folate-conjugated sorafenib-loaded (FCSL) liposomes for theranostic application using ultrasound (US). Materials & methods: US parameter optimization, in vitro release, anticancer effect, in vivo biodistribution, optical imaging and biocompatibility of liposomes were studied. Results: With 84% in vitro release after 4 min of US exposure at 3 MHz (1.2 mechanical index), FCSL liposomes showed lower IC50 (8.70 µM) versus sorafenib (9.34 µM) against HepG2 cells. In vivo biodistribution of FCSL liposomes versus sorafenib after 9 mg/kg injection in the liver (8.63 vs 0.55) > intestine (8.45 vs 1.07) > stomach (5.62 vs 0.57) > kidney (5.46 vs 0.91) showed longer circulation time in plasma and can be tracked in mice. Conclusion: A threefold higher drug concentration in the liver in US-exposed mice makes this a successful nanotheranostic approach.

Sorafenib is the first-line treatment for liver cancer, but it has low absorption due to its poor water solubility and unavoidable side effects. Liposomes can encapsulate a wide range of diagnostic and therapeutic agents. Ultrasound (US) application can lead to enhanced penetration and release at the site of action. In this study, folate-ornamented sorafenib-loaded liposomes were evaluated for safe intravenous administration, anticancer effect, biodistribution and bioavailability in mice after US application. The results of this study will help researchers understand how US and optical imaging show that coumarin-labeled liposomes can act as theranostic agents with dual properties of therapeutics and imaging. US and folate-conjugated sorafenib-loaded theranostic liposomes can be utilized as a promising approach to cancer treatment.

Interventional pain training using phantom model during COVID-19 pandemic.

BACKGROUND: Fluoroscopic-guided lumbar procedures have increased in daily pain practice because the lumbar spine is one of the most common sources of pain. Interventional pain fellows must develop a minimum number of skills during their training in order to achieve the competences without neglecting radiological safety. However, medical training in fluoroscopic-guided interventions is being affected by the current coronavirus disease 2019 (COVID-19) situation. METHODS: The objective of this study was to evaluate the use of a phantom model for lumbar injection as a training strategy during the COVID-19 pandemic in fellows of interventional pain. The study was divided into theoretical and practical modules. The hands-on practice was performed in a lumbar model phantom where fellows were evaluated in four fluoroscopically guided approaches: intra-articular facet block (IAFB), medial branch block (MBB), transforaminal block (TFB), and interlaminar block (ILB) divided in 5 sessions. The aim was to make as many punctures as possible in every session. We measured total procedural performance (TPP), total needle hand time (TNH), and total radiation dose generated by the fluoroscopic machine (TRD) during each procedure. Additionally, a survey was applied to evaluate confidence and satisfaction before and after training. RESULTS: A total of 320 lumbar punctures were completed. The results were statistically significant in all approaches attempted (p < 0.01). The fellow's survey for satisfaction and confidence demonstrated a significant difference between pre and post-test (p < 0.01). CONCLUSIONS: The results of this study highlight the importance of adaptations and adoption of new educational models. The use of the phantom model for simulation could be a strategy for other emerging situations, like the COVID-19 pandemic. Including this practice in the interventional pain programs could lead to better results for the patient and operator radiology safety.

Physical Model for Investigating Intracranial Pressure with Clinical Pressure Sensors and Diagnostic Ultrasound: Preliminary Results.

INTRODUCTION: Intracranial pressure (ICP) is a commonly collected neurocritical parameter, but accurate signal modelling remains challenging. The goal of this project was to mimic clinical ICP waveforms using a physical model. MATERIALS AND METHODS: A physical head model was developed. The skull was segmented from a head computed tomography (CT) scan, remodelled, 3D-printed, and filled with a brain tissue mimicking material and a pressure generator. Pressure measurements and tissue displacement around an attached pressure sensor were explored. RESULTS: Analysis of the measured pressure demonstrated that the waveform did not perfectly resemble that of the clinical ICP. Through iterative improvements and using a revised second pressure generator, subpeaks could be seen in the waveform. A speckle image recorded using ultrasound during pressure application enabled visualization of tissue displacement around the pressure sensor. Comparison with measured ICP signals revealed that minuscule patterns were not distinct in the displacement images. DISCUSSION: We present the first steps towards mimicking clinical ICP using a physical head phantom model. The physical model enabled pressure tests and visualization of tissue displacement and will be foundational for further improvements.

A thermochromic tissue-mimicking phantom model for verification of ablation plans in thermal ablation.

BACKGROUND: Our study aims to develop a novel tissue-mimicking thermochromic with tumor model for visualization of thermal ablation and verification of ablation plans. METHODS: Polyacrylamide gel was mixed with thermochromic ink to produce a phantom model. A phantom model embedded in a tumor model was constructed and used to evaluate the ablation procedure. The phantom models were randomly divided into complete ablation group and incomplete ablation group. The ablation planning of the tumor was on the 3D US and performed on a phantom model. We guide the ablation procedures according to the ablation planning. The results measured in a gross specimen of the phantom model were compared with the expected results in ablation planning. RESULTS: The color of the model changes from cream white to magenta after heating. The mono-site ablation area is a spheroid after thermal ablation with a size of 3.0×1.8 cm at 60 W, 5 minutes, 3.5×2.5 cm at 60 W, 10 minutes, and 4.0×3.5 cm at 60 W, 15 minutes, respectively. According to the ablation planning, a total of 4 ablation points were needed to retrieve the complete ablation of a 3.0 cm tumor. The complete ablation and incomplete ablation were proved by a gross specimen of the phantom model as we expected. CONCLUSIONS: A novel thermochromic tissue-mimicking phantom model with a spherical tumor model has been designed and developed. The ablation area can be visualized on this phantom model by the permanent color change. This phantom model can assess the ablation planning system's accuracy and train operators for ultrasound-guided thermal ablation.

Proximal Side-Branch Optimization in Crush Stenting: A Step-by-Step Technical Approach in a Silicone Phantom Model.

Provisional single drug-eluting stent (DES) strategy remains the standard of care in simple bifurcation lesions which comprise the vast majority of coronary bifurcations. Nevertheless, the presence of complex bifurcations which are defined based on the 1) Side Branch (SB) lesion length of >10 mm and 2) SB ostial diameter stenosis of >70% are approached with a 2-DES strategy upfront. The bifurcation angle will further define the most appropriate technique, with T-stenting more suitable in angulations close to 90°, Culotte and the family of Crush techniques more appropriate for acute angles of <75°. The Crush techniques which are composed of the classic Crush, mini-Crush and double kissing Crush (DK-Crush) share the core principle of protruding the SB DES within the Main Branch (MB) to minimize the risk of ostial SB restenosis, which remains the most prevalent etiology of stent failure during 2-stent approach in bifurcations. Proximal Side Optimization (PSO) is an additional technical consideration to further optimize the protruding SB struts enabling 1) optimal SB strut accommodation to the larger MB vessel diameter, 2) strut enlargement that will further facilitate effortless rewiring for kissing balloon inflation (KBI) avoiding unfavorable guide wire advancement in the peri-ostial SB area.

Life Course Pathway to Later-Year Depressive Symptoms: Multiple Mediation of Socio-Economic Status and Coping Resources by Gender.

Drawing on a life course and stress process perspective, this study examined the pathway from childhood SES to later year depressive symptoms, focusing on multiple life course SES and coping resources in old age. Data came from the 2006 and 2015 waves of the Korea Welfare Panel Study (KOWEPS). We selected respondents aged 51-55 in 2006 who were followed up when they were between 60 to 64 years of age in 2015. We merged the middle aged data in 2006 with the 2015 data when the respondents were 60-64 years of age (N = 687). Phantom modeling was used to examine a multiple mediation pathway and multi-group analyses were conducted to examine the gender differences in the pathway.For older men, satisfaction with social/leisure activities was a significant coping resource, while, for older women, satisfaction with family relations was important.