RESUMO
Metal-free carbon-based electrocatalysts have gained significant attention in the field of zinc-air batteries (ZABs) due to their affordability, good conductivity and chemical stability. However, unmodified carbon materials typically fall short in adsorbing and activating the substrates and intermediates involved in oxygen reduction reactions (ORR). Here, a metal-free carbon-based electrocatalyst with S atom p orbital hybrid modified N-sp3/sp2 carbon structure (C/NS) were prepared by cyclodextrins inclusion. The catalyst demonstrates impressive ORR activity (E1/2=0.885 V vs. RHE) and robust ZABs performance with a power density of 171.3 mW cm-2 and a specific capacity of 781.2 mAh g-1. Density functional theory (DFT) calculation reveals that S atom effectively regulates the charge distribution and p-band center of active site carbon atom in the N-sp3/sp2 carbon structure. This modification prompts the adsorption and dissociation of O2 and intermediates, resulting in higher reactive activity. This work provides a valuable and practical strategy for preparing cost-effective metal-free carbon-based electrocatalysts for ORR with high performance.
RESUMO
FeNC catalysts are considered one of the most promising alternatives to platinum group metals for the oxygen reduction reaction (ORR). Despite the extensive research on improving ORR activity, the undesirable durability of FeNC is still a critical issue for its practical application. Herein, inspired by the antioxidant mechanism of natural enzymes, CeO2 nanozymes featuring catalase-like and superoxide dismutase-like activities were coupled with FeNC to mitigate the attack of reactive oxygen species (ROS) for improving durability. Benefiting from the multienzyme-like activities of CeO2, ROS generated from FeNC is instantaneously eliminated to alleviate the corrosion of carbon and demetallization of metal sites. Consequently, FeNC/CeO2 exhibits better ORR durability with a decay of only 5 mV compared to FeNC (18 mV) in neutral electrolyte after 10k cycles. The FeNC/CeO2-based zinc-air battery also shows minimal voltage decay over 140 h in galvanostatic discharge-charge cycling tests, outperforming FeNC and commercial Pt/C.
RESUMO
Acidic H2O2 synthesis through electrocatalytic 2e- oxygen reduction presents a sustainable alternative to the energy-intensive anthraquinone oxidation technology. Nevertheless, acidic H2O2 electrosynthesis suffers from low H2O2 Faradaic efficiencies primarily due to the competing reactions of 4e- oxygen reduction to H2O and hydrogen evolution in environments with high H+ concentrations. Here, we demonstrate the significant effect of alkali metal cations, acting as competing ions with H+, in promoting acidic H2O2 electrosynthesis at industrial-level currents, resulting in an effective current densities of 50-421â mA cm-2 with 84-100 % Faradaic efficiency and a production rate of 856-7842â µmol cm-2 h-1 that far exceeds the performance observed in pure acidic electrolytes or low-current electrolysis. Finite-element simulations indicate that high interfacial pH near the electrode surface formed at high currents is crucial for activating the promotional effect of K+. In situ attenuated total reflection Fourier transform infrared spectroscopy and ab initio molecular dynamics simulations reveal the central role of alkali metal cations in stabilizing the key *OOH intermediate to suppress 4e- oxygen reduction through interacting with coordinated H2O.
RESUMO
BACKGROUND: Biogeochemical processing of metals including the fabrication of novel nanomaterials from metal contaminated waste streams by microbial cells is an area of intense interest in the environmental sciences. RESULTS: Here we focus on the fate of Ce during the microbial reduction of a suite of Ce-bearing ferrihydrites with between 0.2 and 4.2 mol% Ce. Cerium K-edge X-ray absorption near edge structure (XANES) analyses showed that trivalent and tetravalent cerium co-existed, with a higher proportion of tetravalent cerium observed with increasing Ce-bearing of the ferrihydrite. The subsurface metal-reducing bacterium Geobacter sulfurreducens was used to bioreduce Ce-bearing ferrihydrite, and with 0.2 mol% and 0.5 mol% Ce, an Fe(II)-bearing mineral, magnetite (Fe(II)(III)2O4), formed alongside a small amount of goethite (FeOOH). At higher Ce-doping (1.4 mol% and 4.2 mol%) Fe(III) bioreduction was inhibited and goethite dominated the final products. During microbial Fe(III) reduction Ce was not released to solution, suggesting Ce remained associated with the Fe minerals during redox cycling, even at high Ce loadings. In addition, Fe L2,3 X-ray magnetic circular dichroism (XMCD) analyses suggested that Ce partially incorporated into the Fe(III) crystallographic sites in the magnetite. The use of Ce-bearing biomagnetite prepared in this study was tested for hydrogen fuel cell catalyst applications. Platinum/carbon black electrodes were fabricated, containing 10% biomagnetite with 0.2 mol% Ce in the catalyst. The addition of bioreduced Ce-magnetite improved the electrode durability when compared to a normal Pt/CB catalyst. CONCLUSION: Different concentrations of Ce can inhibit the bioreduction of Fe(III) minerals, resulting in the formation of different bioreduction products. Bioprocessing of Fe-minerals to form Ce-containing magnetite (potentially from waste sources) offers a sustainable route to the production of fuel cell catalysts with improved performance.
Assuntos
Cério , Óxido Ferroso-Férrico , Geobacter , Platina , Cério/química , Cério/metabolismo , Geobacter/metabolismo , Catálise , Óxido Ferroso-Férrico/química , Platina/química , Oxirredução , Compostos Férricos/química , Compostos Férricos/metabolismoRESUMO
The intrinsic roadblocks for designing promising Pt-based oxygen reduction reaction (ORR) catalysts emanate from the strong scaling relationship and activity-stability-cost trade-offs. Here, a carbon-supported Pt nanoparticle and a Mn single atom (PtNP-MnSA/C) as in situ constructed PtNP-MnSA pairs are demonstrated to be an efficient catalyst to circumvent the above seesaws with only â¼4 wt % Pt loadings. Experimental and theoretical investigations suggest that MnSA functions not only as the "assist" for Pt sites to cooperatively facilitate the dissociation of O2 due to the strong electronic polarization, affording the dissociative pathway with reduced H2O2 production, but also as an electronic structure "modulator" to downshift the d-band center of Pt sites, alleviating the overbinding of oxygen-containing intermediates. More importantly, MnSA also serves as a "stabilizer" to endow PtNP-MnSA/C with excellent structural stability and low Fenton-like reactivity, resisting the fast demetalation of metal sites. As a result, PtNPs-MnSA/C shows promising ORR performance with a half-wave potential of 0.93 V vs reversible hydrogen electrode and a high mass activity of 1.77 A/mgPt at 0.9 V in acid media, which is 19 times higher than that of commercial Pt/C and only declines by 5% after 80,000 potential cycles. Specifically, PtNPs-MnSA/C reaches a power density of 1214 mW/cm2 at 2.87 A/cm2 in an H2-O2 fuel cell.
RESUMO
In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.
RESUMO
Developing a highly active, durable, and low-platinum-based electrocatalyst for the cathodic oxygen reduction reaction (ORR) is for breaking the bottleneck of large-scale applications of proton exchange membrane fuel cells (PEMFCs). Herein, ultrafine PtZn intermetallic nanoparticles with low Pt-loading and trace germanium (Ge) involvement confined in the nitrogen-doped porous carbon (Ge-L10-PtZn@N-C) are reported. The Ge-L10-PtZn@N-C exhibit superior ORR activity with a mass activity of 3.04 A mg-1 Pt and specific activity of 4.69 mA cm-2, ≈12.2- and 10.2-times improvement compared to the commercial Pt/C (20%) at 0.90 V in 0.1 m KOH. The cathodic catalyst Ge-L10-PtZn@N-C assembled in the PEMFC shows encouraging peak power densities of 316.5 (at 0.86 V) and 417.2 mW cm-2 (at 0.91 V) in alkaline and acidic fuel-cell, respectively. The combination of experiment and density functional theory calculations (DFT) results robustly reveal that the participation of trace Ge can not only trigger a "growth site locking effect" to effectively inhibit nanoparticle growth, bring miniature nanoparticles, enhance dispersion uniformity, and achieve the exposure of the more electrochemical active site, but also effectively modulates the electronic structure, hence optimizing the adsorption/desorption of the oxygen intermediates.
RESUMO
The exploration of inexpensive and efficient catalysts for oxygen reduction reaction (ORR) is crucial for chemical and energy industries. Carbon materials have been proved promising with different catalysts enabling 2 and 4e- ORR. Nevertheless, their ORR activity and selectivity is still complex and under debate in many cases. Many structures of these active carbon materials are also chemically unstable for practical implementations. Unlike the well-discussed structures, this work presents a strategy to promote efficient and stable 2e- ORR of carbon materials through the synergistic effect of lattice distortion and H-passivation (on the distorted structure). We show how these structures can be formed on carbon cloth, and how the reproducible chemical adsorption can be realized on these structures for efficient and stable H2 O2 production. The work here gives not only new understandings on the 2e- ORR catalysis, but also the robust catalyst which can be directly used in industry.
RESUMO
Producing hydrogen peroxide (H2O2) from H2O and O2 under visible light irradiation is a promising solar-to-chemical energy conversion technology. Hydrogen peroxide has versatile applications as a green oxidant and liquid energy carrier but has been produced through energy-intensive and complex anthraquinone processes. Herein, we report the rational design of efficient and stable porous organic polymer (POP) containing redox centers, anthraquinone photocatalyst (ANQ-POP) for solar H2O2 production. ANQ-POP is readily synthesized with stable dioxin-linkages via efficient one-pot, transition-metal-free nucleophilic aromatic substitution reactions between 1,2,3,4,5,6,7,8-octafluoro-9,10-anthraquinone (OFANQ) and 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP). Exhibiting a fibrillar morphology, ANQ-POP boasts a high surface area of 380 m2âg-1 and demonstrates thermal stability. With 10 % ethanol, ANQ-POP yields an H2O2 production rate of 320 µmol g-1 under visible light irradiation. Moreover, ANQ-POP alone can efficiently produce H2O2 without any photosensitizers and cocatalysts. Density functional theory calculations reveal that the quinone groups of the anthraquinone moieties can serve as redox centers for H2O2 production under light irradiation. Furthermore, unlike most conventional photocatalysts, it can produce H2O2 using only water and air by catalyzing both oxygen reduction and evolution reactions under light irradiation. Our findings provide an efficient, eco-friendly pathway for photocatalytic production of H2O2 under mild reaction conditions using a dioxin-derived POP-based photocatalyst.
RESUMO
Atomically dispersed and nitrogen coordinated iron catalysts (Fe-NCs) demonstrate potential as alternatives to platinum-group metal (PGM) catalysts in oxygen reduction reaction (ORR). However, in the context of practical proton exchange membrane fuel cell (PEMFC) applications, the membrane electrode assembly (MEA) performances of Fe-NCs remain unsatisfactory. Herein, improved MEA performance is achieved by tuning the local environment of the Fe-NC catalysts through defect engineering. Zeolitic imidazolate framework (ZIF)-derived nitrogen-doped carbon with additional CO2 activation is employed to construct atomically dispersed iron sites with a controlled defect number. The Fe-NC species with the optimal number of defect sites exhibit excellent ORR performance with a high half-wave potential of 0.83 V in 0.5 M H2 SO4 . Variation in the number of defects allows for fine-tuning of the reaction intermediate binding energies by changing the contribution of the Fe d-orbitals, thereby optimizing the ORR activity. The MEA based on a defect-engineered Fe-NC catalyst is found to exhibit a remarkable peak power density of 1.1 W cm-2 in an H2 /O2 fuel cell, and 0.67 W cm-2 â in an H2 /air fuel cell, rendering it one of the most active atomically dispersed catalyst materials at the MEA level.
RESUMO
High entropy alloys (HEAs) are highly suitable candidate catalysts for oxygen evolution and reduction reactions (OER/ORR) as they offer numerous parameters for optimizing the electronic structure and catalytic sites. Herein, FeCoNiMoW HEA nanoparticles are synthesized using a solution-based low-temperature approach. Such FeCoNiMoW nanoparticles show high entropy properties, subtle lattice distortions, and modulated electronic structure, leading to superior OER performance with an overpotential of 233 mV at 10 mA cm-2 and 276 mV at 100 mA cm-2 . Density functional theory calculations reveal the electronic structures of the FeCoNiMoW active sites with an optimized d-band center position that enables suitable adsorption of OOH* intermediates and reduces the Gibbs free energy barrier in the OER process. Aqueous zinc-air batteries (ZABs) based on this HEA demonstrate a high open circuit potential of 1.59 V, a peak power density of 116.9 mW cm-2 , a specific capacity of 857 mAh gZn -1 , and excellent stability for over 660 h of continuous charge-discharge cycles. Flexible and solid ZABs are also assembled and tested, displaying excellent charge-discharge performance at different bending angles. This work shows the significance of 4d/5d metal-modulated electronic structure and optimized adsorption ability to improve the performance of OER/ORR, ZABs, and beyond.
RESUMO
The oxygen reduction reaction (ORR) is an important step in the widespread application of metal-air batteries, so it is necessary to study and develop low-cost and efficient metal-free carbon-based catalysts to catalyze the ORR reaction. Heteroatomic doping, especially N and S co-doped carbon materials, has received much focus as a promising ORR catalyst. Meanwhile, the lignin material has high carbon content, wide source, and low price, and has wide application prospects for the preparation of carbon material catalysts. Here we report a hydrothermalcarbonation preparation method for the synthesis of carbon microspheres by utilizing lignin derivatives as carbon precursors. And a variety of N, S co-doped carbon microsphere materials were prepared by adding different nitrogen sources (urea, melamine, NH4Cl) to the microspheres. The N, S co-doped carbon microspheres (NSCMS-MLSN) catalysts achieved with NH4Cl as the nitrogen source displayed superior RR catalytic activity with high half-wave potential (E1/2 = 0.83 V vs. RHE) and current density (JL = 4.78 mA cm-2). This work provides some references on the method of preparing carbon materials co-doped with N and S and the choice of nitrogen sources.
Assuntos
Carbono , Lignina , Humanos , Microesferas , Alcanossulfonatos , Hipóxia , Nitrogênio , OxigênioRESUMO
Exploring advanced co-reaction accelerators with superior oxygen reduction activity that generate rich reactive oxygen species (ROS) has attracted great attention in boosting luminol-O2 electrochemiluminescence (ECL). However, tuning accelerators for efficient and selective catalytic O2 activation to switch anodic/cathodic ECL is very challenging. Herein, we report that enzyme-inspired Fe-based single-atom catalysts with axial N/C coordination structures (FeN5 , FeN4 © SACs) can generate specific ROS for cathodic/anodic ECL conversion. Mechanistic studies reveal that FeN5 sites prefer to produce highly active hydroxyl radicals and afford direct cathodic luminescence by promoting the cleavage of O-O bonds through N-induced electron redistribution. In contrast, FeN4 © sites tend to produce superoxide radicals, resulting in inefficient anodic ECL. Benefiting from the enhanced cathodic ECL, FeN5 SAC-based immunosensor was constructed for the sensitive detection of cancer biomarkers.
Assuntos
Técnicas Biossensoriais , Oxigênio , Medições Luminescentes/métodos , Espécies Reativas de Oxigênio , Técnicas Biossensoriais/métodos , Imunoensaio/métodos , Radical Hidroxila , Técnicas EletroquímicasRESUMO
Platinum-based (Pt) catalysts are the most common commercial catalysts for oxygen reduction reactions (ORR). Unfortunately, their high price, scarcity and poor durability hinder their further development. Therefore, the development of effective and economical ORR electrocatalysts has received increasing attention. Here, carbon dots (CDs) enriched in amino functional groups were successfully loaded onto carbon nanotubes (CNTs) with a large surface area and helical structure through a surface state engineering strategy. The resulting composites (CD/CNTs) are 0D/1D nano heterojunction structures. The CD/CNTs showed superior ORR activity compared with CNTs and CDs (Eoneset = 0.95 V, E1/2 = 0.81 V and limiting current density = 4.74 mA cm-2). In addition, the stability of CD/CNTs in an alkaline medium was up to 30000 s. The excellent ORR performance of CD/CNTs can be attributed to the dominant role of amino-N, the synergistic effect of heterojunctions formed by CDs and CNTs, and the high Lewis basicity. The composite electrocatalyst synthesized by the CD-regulated CNT strategy is expected to be a reliable cathode candidate for future energy conversion devices.
RESUMO
In heterogeneous catalysis, single-atom catalysts are the frontier and important prototypes for many reactions, and revealing the intrinsic structure-activity relationship is presently a critical task, but remains challenging. In this work, water electrolysis and oxygen reduction performances of FeXYi N3 -i (X, Y = B, C, O, P and S; i = 0, 1) moiety in Fe-porphyrin are studied by the first-principles calculations, aiming at unraveling how and why tuning the coordination microenvironment of the active metal atom can improve the activity. It can be concluded that breaking the coordination shell symmetry breaks the well-accepted standard scaling relationship, adjusts *O adsorption behavior and thus optimizes the oxygen evolution reaction (OER) activity, for example, to an extremely low overpotential of 0.17 V. In combination with the Fe atom spin configuration and ligand field theory, the dramatically improved OER activity can be well explained. In the present work, the significance of the coordination microenvironment of central metal atom in studies of electrocatalysis is highlighted.
Assuntos
Hipóxia , Oxigênio , Humanos , Domínio Catalítico , Eletrólise , ÁguaRESUMO
Platinum group metal (PGM)-free M-N-C catalysts have exhibited dramatic electrocatalytic performance and are considered the most promising candidate of the Pt catalysts in oxygen reduction reaction (ORR). However, the electrocatalytic performance of the M-N-C catalysts is still limited by their inferior intrinsic activity and finite active site density. Regulating the coordination environment and increasing the pore structure of the catalyst is an effective strategy to enhance the electrocatalytic performance of the M-N-C catalysts. In this work, the coordination environment and pore structure exquisitely regulated Fe-N-C catalyst exhibit excellent ORR activity and durability. With the enhanced intrinsic activity and increased active site density, the optimized Fe-N/S-C catalyst shows impressive ORR activity (E1/2 = 0.904 V vs reversible hydrogen electrode (RHE)) and superior long-term durability in an alkaline medium. As the advanced physical characterization and theoretical chemistry methods illustrate, the S-modified Fe-Nx (Fe-N3 /S-C) moiety is confirmed as the improved active center for ORR, and the increased active site density further improved ORR efficiency. Based on the Fe-N/S-C cathode, a Zn-air battery is fabricated and shows superior power density (315.4 mW cm-2 ) and long-term discharge stability at 20 mA cm-2 . This work would open a new perspective to design atomically dispersed iron-metal site catalysts for advanced electro-catalysis.
RESUMO
Atomically dispersed nitrogen-coordinated 3d transition-metal site on carbon support (M-NC) are promising alternatives to Pt group metal-based catalysts toward oxygen reduction reaction (ORR). However, despite the excellent activities of most of M-NC catalysts, such as Fe-NC, Co-NC et al., their durability is far from satisfactory due to Fenton reaction. Herein, this work reports a novel Si-doped Ni-NC catalyst (Ni-SiNC) that possesses high activity and excellent stability. X-ray absorption fine structure and aberration-corrected transmission electron microscopy uncover that the single-atom Ni site is coordinated with one Si atom and three N atoms, constructing Ni-Si1 N3 moiety. The Ni-SiNC catalyst exhibits a half-wave potential (E1/2 ) of 0.866 V versus RHE, with a distinguished long-term durability in alkaline media of only 10 mV negative shift in E1/2 after 35 000 cycles, which is also validated in Zn-air battery. Density functional theory calculations reveal that the Ni-Si1 N3 moiety facilitates ORR kinetics through optimizing the adsorption of intermediates.
RESUMO
Searching for high effective catalysts has been an endless effort to improve the efficiency of green energy harvesting and degradation of pollutants. In the past decades, tremendous strategies are explored to achieve high effective catalysts, and various theoretical understandings are proposed for the improved activity. As the catalytic reaction occurs at the surface or edge, the unsaturated ions may lead to the fluctuation of spin. Meanwhile, transition metals in catalysts have diverse spin states and may yield the spin effects. Therefore, the role of spin or magnetic moment should be carefully examined. In this review, the recent development of spin catalysts is discussed to give an insightful view on the origins for the improved catalytic activity. First, a brief introduction on the applications and advances in spin-related catalytic phenomena, is given, and then the fundamental principles of spin catalysts and magnetic fields-radical reactions are introduced in the second part. The spin-related catalytic performance reported in oxygen evolution/reduction reaction (OER/ORR) is systematically discussed in the third part, and general rules are summarized accordingly. Finally, the challenges and perspectives are given. This review may provide an insightful understanding of the microscopic mechanisms of catalytic phenomena and guide the design of spin-related catalysts.
RESUMO
P-block metals have gradually been utilized to synthesize non-noble-metal catalysts for oxygen reduction reaction (ORR) due to the easily tunable localized p-orbitals and resulted versatile electronic structures. The high-density single-atom bismuth sites (Bi-NC) anchored onto nitrogen-doped three-dimensional porous carbon are proved to possess significant electrocatalytic ORR performance. Theoretical calculations unveil positively charged bismuth centers prominently improved the adsorption capacity of N-doped carbon to O2 . The p orbitals of Bi sites within Bi-NC easily generate hybrid states with p orbitals of O2 , thus promoting charge transfer and ultimately reducing the energy barrier of ORR. Benefiting from p-orbital electrons regulation of bismuth atoms, Bi-NC exhibit ORR half-wave potential of 0.86 V (vs RHE). Additionally, both liquid and quasi-solid zinc-air batteries with Bi-NC as air-cathodes achieve higher power density and specific capacity than 20 wt% Pt/C, and comparable stability and round-trip efficiency with 20 wt% Pt/C. The discovery sheds light on the theoretical and practical guidance for p-block metallic single-atom catalysts.
RESUMO
Single-atom catalysts (SACs) are of tremendous current research due to maximized use of metal atoms and enhanced activity and selectivity for a great variety of chemical reactions. Hierarchically structured SACs have been explored to further increase the number and accessibility of active sites to realize the full potentials of SACs. However, though plausible-sounding, these supposed advantages of hierarchically structured SACs are largely untested. The assumed enhancing effects on the formation of intermediates on and the overall reaction kinetics remain largely unknown. Herein is reported a Fe-SAC with a hierarchical hollow structure (Fe/HH) that showed excellent activity in oxygen reduction reaction and proton exchange membrane fuel cell. Comparative experimental and computational studies with respect to Fe/SS-the counterpart of Fe/HH with a compact primary structure-reveal a significantly increased number of active sites and their utilization in Fe/HH as reflected by the facilitated formation of the rate-determining-step intermediate Fe-OOH*. This work thus establishes unambiguously the connection between the increased utilization of active sites and the enhanced kinetics of the electrocatalytic reduction of oxygen.