[In-site electrophoretic elution of excessive fluorescein isothiocyanate from fluorescent particles in gel for image analysis].

The sensitivity, accuracy, and efficiency of fluorescent particle detection can be improved by purifying the fluorescent-dye-labeled particles. In this study, an in-site model of electrophoretic elution (EE) was developed for the facile and efficient removal of unconjugated fluorescent dyes after labeling reactions, thereby facilitating the sensitive fluorescent imaging of proteins captured by microbeads. First, bovine serum albumin (BSA) and magnetic beads (MBs) were chosen as the model protein and particles, respectively, and an MBs-BSA complex was synthesized by mixing the beads with the BSA solution. Second, excessive fluorescein isothiocyanate (FITC) was added to the EP tube with MBs-BSA suspension for the fluorescent labeling of BSA, and a labeled compound was obtained after 8-h incubation in the dark at 4 ℃. The unpurified MBs-BSAFITC was obtained by removing the supernatant, leaving 5 µL of the residual solution in the EP tube. The obtained MBs-BSAFITC solution was added to a 50-µL phosphate buffer solution (PBST, containing 0.01% Triton X-100, pH 7.4). Third, gel suspension was prepared by mixing the MBs-BSAFITC solution with the low-gelling-temperature agarose gel (10 g/L) and filled into an electrophoresis channel. To demonstrate the high efficiency of the in-site model of EE for removing excessive FITC, a 10-mm hydrogel segment was prepared using MBs-BSAFITC sandwiched between two blank hydrogels and filled into a 50-mm-long electrophoresis tube (outer diameter: 5 mm; inner diameter: 3 mm) for the EE. Subsequently, the filled channel was set in an electrophoresis device to construct the in-site EE model. The particle size of the MBs was larger than the pore size of the gel, and the fluorescent beads were physically immobilized in the gel while the excessive FITC was removed from the channel by electrophoresis. Before an EE run, the original fluorescence image of the target gel was captured using a CCD camera. After the 30-min EE (50 V, 6 mA, pH 7.4 PBS), the fluorescence image was also recorded by the CCD camera. The fluorescent images were converted to a grayscale intensity map. To simplify the calculation, a simple fluorescent image analysis method was developed. The side view of the grayscale intensity map is a two-dimensional plot of peaks. Each peak indicates a fluorescent spot at a given position along the length of the channel when the distribution density of the particles is low, and the peak value is the grayscale intensity of the fluorescent spot. The statistical peak numbers and values can be used to approximate fluorescent spots on the image. After image processing and calculations, 27.8% of the average grayscale intensity of the fluorescent spot was retained, comparing the average gray value of the bright spot before and after EE, and 97.6% of excessive FITC in the channel was cleared, obtained by calculating the decreased background fluorescence grayscale intensity after EE. The particle-to-background signal ratio (P/B ratio, PBr) increased from 1.08 to 12.2 after EE with an exposure time of 1.35 s. In addition, different exposure times were explored during the fluorescence detection. Increasing the exposure time from 1.35 to 2.35 s enhanced PBr from 12.2 to 15.5, which could effectively increase the signal-to-noise ratio. An appropriate increase in exposure time also allowed the detection of many weak fluorescent particles that were previously undetectable, indicating increased sensitivity of the fluorescence detection. The EE model has the following advantages: (i) increase in specificity by eluting FITC absorbed to the surface of beads; (ii) high efficiency in the removal of free FITC with more than 97% clearance; (iii) rapid decrease in noise in the mass hydrogel (within 30 min). This method can be used in beads/spots-based immunoassay in gel, immuno-electrophoresis, and fluorescent staining of protein/nucleic acid bands in gel electrophoresis.

Reaction-Free Concentration Gradient Generation in Spatially Nonuniform AC Electric Fields.

The ability to generate stable, spatiotemporally controllable concentration gradients is critical for both electrokinetic and biological applications such as directional wetting and chemotaxis. Electrochemical techniques for generating solution and surface gradients display benefits such as simplicity, controllability, and compatibility with automation. Here, we present an exploratory study for generating microscale spatiotemporally controllable gradients using a reaction-free electrokinetic technique in a microfluidic environment. Methanol solutions with ionic fluorescein isothiocyanate (FITC) molecules were used as an illustrative electrolyte. Spatially nonuniform alternating current (AC) electric fields were applied using hafnium dioxide (HfO2)-coated Ti/Au electrode pairs. Results from spatial and temporal analyses along with control experiments suggest that the FITC ion concentration gradient in bulk fluid (over 50 µm from the electrode) was established due to spatial variation of electric field density, and was independent of electrochemical reactions at the electrode surface. The established ion concentration gradients depended on both amplitudes and frequencies of the oscillating AC electric field. Overall, this work reports a novel approach for generating stable and spatiotemporally tunable gradients in a microfluidic chamber using a reaction-free electrochemical methodology.

Identification and Validation of a New Peptide Targeting Pancreatic Beta Cells.

Noninvasive targeted visualization of pancreatic beta cells or islets is becoming the focus of molecular imaging application in diabetes and islet transplantation studies. In this study, we aimed to produce the beta-cell-targeted peptide for molecular imaging of islet. We used phage display libraries to screen a beta-cell-targeted peptide, LNTPLKS, which was tagged with fluorescein isothiocyanate (FITC). This peptide was validated for targeting beta-cell with in vitro and in vivo studies. Immunocytochemistry (ICC) and fluorescence-activated cell sorting (FACS) analysis were used to validate the target specificity of the peptide. FITC-LNTPLKS displayed much higher fluorescence in beta cells vs. control cells in ICC. This discrimination was consistently observed using primary rodent islet. FACS analysis showed right shift of peak point in beta cells compared to control cells. The specific bind to in situ islet was verified by in vitro experiments using rodent and human pancreatic slices. The peptide also showed high affinity of islet grafts under the renal capsule. In the insulinoma animal model, we could find FITC-LNTPLKS accumulated specifically to the tumor, thus indicating a potential clinical application of molecular imaging of insulinoma. In conclusion, LNTPLKS showed a specific probe for beta-cells, which might be further utilized in targeted imaging/monitoring beta cells and theragnosis for beta-cells-related disease (diabetes, insulinoma, etc.).

"Sustained irrigation" effect enhanced the accumulation and retention of ultra-long circulating nanoparticles in tumor.

The development of ultra-long circulating nanodrug delivery systems have showed distinct advantage in maintaining the long-lasting tumor retention. Although the relationship between extended tumor retention and ultra-long plasma half-life was apparent, there was still a lack of experimental evidence to reveal the enhancement mechanism. Herein, we proposed a concept of "Sustained Irrigation" effect ("SI" effect) to elucidate that it was through sustained blood irrigation that the ultra-long circulating nanoparticles achieved long-lasting tumor retention. Besides, in order to intuitively verify the "SI" effect, we developed an "ON-OFF-ON" fluorescence switch technology. The ultra-long circulating delivery nanoparticle was constructed by encapsulating the protein with hydrophilic polymer shell. Nanoparticles with ultra-long plasma half-life (t1/2>40 h) fabricated by this method were employed as models for demonstrating the "SI" effect. The recovery of Cy5.5 fluorescence after the laser quenching meant the "fresh" Cy5.5-labeled nanoparticles were entering tumor, which confirmed the ultra-long circulating nanoparticles in blood could sustainedly irrigate to tumor. Our finding revealed the key mechanism by which ultra-long circulating NDDSs enhanced the tumor accumulation and retention, and provided experimental support for the development of ultra-long circulating delivery system in clinic.

Determining vitreous viscosity using fluorescence recovery after photobleaching.

PURPOSE: Vitreous humor is a complex biofluid whose composition determines its structure and function. Vitreous viscosity will affect the delivery, distribution, and half-life of intraocular drugs, and key physiological molecules. The central pig vitreous is thought to closely match human vitreous viscosity. Diffusion is inversely related to viscosity, and diffusion is of fundamental importance for all biochemical reactions. Fluorescence Recovery After Photobleaching (FRAP) may provide a novel means of measuring intravitreal diffusion that could be applied to drugs and physiological macromolecules. It would also provide information about vitreous viscosity, which is relevant to drug elimination, and delivery. METHODS: Vitreous viscosity and intravitreal macromolecular diffusion of fluorescently labelled macromolecules were investigated in porcine eyes using fluorescence recovery after photobleaching (FRAP). Fluorescein isothiocyanate conjugated (FITC) dextrans and ficolls of varying molecular weights (MWs), and FITC-bovine serum albumin (BSA) were employed using FRAP bleach areas of different diameters. RESULTS: The mean (±standard deviation) viscosity of porcine vitreous using dextran, ficoll and BSA were 3.54 ± 1.40, 2.86 ± 1.13 and 4.54 ± 0.13 cP respectively, with an average of 3.65 ± 0.60 cP. CONCLUSIONS: FRAP is a feasible and practical optical method to quantify the diffusion of macromolecules through vitreous.

Improving the cell-membrane-penetrating activity of globins by introducing positive charges on protein surface: A case study of sperm whale myoglobin.

Globins are heme proteins such as hemoglobin (Hb), myoglobin (Mb) and neuroglobin (Ngb), playing important roles in biological system. In addition to normal functions, zebrafish Ngb was able to penetrate cell membranes, whereas less was known for other globin members. In this study, to improve the cell-membrane-penetrating activity of globins, we used sperm whale Mb as a model protein and constructed a quadruple mutant of G5K/Q8K/A19K/V21K Mb (termed 4K Mb), by introduction of four positive charges on the protein surface, which was designed according to the amino acid alignment with that of zebrafish Ngb. Spectroscopic and crystallographic studies showed that the four positively charged Lys residues did not affect the protein structure. Cell-membrane-penetrating essay further showed that 4K Mb exhibited enhanced activity compared to that of native Mb. This study provides valuable information for the effect of distribution of charged residues on the protein structure and the cell-membrane-penetrating activity of globins. Therefore, it will guide the design of protein-based biomaterials for biological applications.

A Rapid Self-Assembly Peptide Hydrogel for Recruitment and Activation of Immune Cells.

Self-assembly peptide nanotechnology has attracted much attention due to its regular and orderly structure and diverse functions. Most of the existing self-assembly peptides can form aggregates with specific structures only under specific conditions and their assembly time is relatively long. They have good biocompatibility but no immunogenicity. To optimize it, a self-assembly peptide named DRF3 was designed. It contains a hydrophilic and hydrophobic surface, using two N-terminal arginines, leucine, and two c-terminal aspartate and glutamic acid. Meanwhile, the c-terminal of the peptide was amidated, so that peptide segments were interconnected to increase diversity. Its characterization, biocompatibility, controlled release effect on antigen, immune cell recruitment ability, and antitumor properties were examined here. Congo red/aniline blue staining revealed that peptide hydrogel DRF3 could be immediately gelled in PBS. The stable ß-sheet secondary structure of DRF3 was confirmed by circular dichroism spectrum and IR spectra. The observation results of cryo-scanning electron microscopy, transmission electron microscopy, and atomic force microscopy demonstrated that DRF3 formed nanotubule-like and vesicular structures in PBS, and these structures interlaced with each other to form ordered three-dimensional nanofiber structures. Meanwhile, DRF3 showed excellent biocompatibility, could sustainably and slowly release antigens, recruit dendritic cells and promote the maturation of dendritic cells (DCs) in vitro. In addition, DRF3 has a strong inhibitory effect on clear renal cell carcinoma (786-0). These results provide a reliable basis for the application of peptide hydrogels in biomedical and preclinical trials.

FITC characterization of a cathepsin B-responsive nanoprobe for report of differentiation of HL60 cells into macrophages.

A cathepsin B (Cat B)-responsive optical nanoprobe is designed and prepared for report of HL60 differentiation into macrophage. A peptide sequence FRFK is linked to fluorescein (FITC) via the distant amino group of its lysine and N-terminated with acrylic acid (AA) to yield a molecular fluorescent probe AA-FRFK (FITC). The molecular probe is further embedded in poly(lactic-co-glycolic acid) (PLGA) to form a fluorescent nanoprobe AA-FRFK (FITC)@PLGA. The resultant optical nanoprobe is degradable by lysosomal Cat B, which is expressed in macrophages with a level of 5-10 times of that in HL60 cells. As a result, a significant decrease in fluorescence intensity is associated with the differentiation process of HL60 to macrophage and can be used as an indication of the differentiation process. The findings may pave a way toward the development of a universal in vitro labeling strategy of exogenous stem cells for report of in vivo cell differentiation by a dual-mode imaging modality involving optical imaging and magnetic resonance imaging.

Sulfated Extract of Abelmoschus Esculentus: A Potential Cancer Chemo-preventive Agent.

BACKGROUND: Abelmoschus esculentus (AE) (okra), is an edible plant used in many food applications. OBJECTIVE: This study explored whether sulfated AE (SAE) has promising cancer chemopreventive activities that may recommend it as a functional food supplement instead of (or in addition to) AE for the population at risk of cancer and in the health food industry. METHODS: Cytochrome P450-1A (CYP1A) was estimated by fluorescence enzymatic reaction, using ß-naphthoflavone-treated cells (CYP1A inducer). Peroxyl and hydroxyl radical scavenging was assayed by oxygen radical absorbance capacity assay. Flow cytometry was used to analyze apoptosis/necrosis in MCF-7 cells, cell cycle phases in MCF-7 cells, and macrophage binding to fluorescein isothiocyanate-lipopolysaccharide (FITC-LPS). Nitric oxide was determined by Griess assay in LPS-stimulated macrophages, and cytotoxicity was determined by MTT assay. Diethylnitrosamine (DEN) was used to induce hepatic tumor initiation in rats. Placental glutathione-S-transferase (GSTP; an initiation marker) was stained in a fluorescence immunohistochemical analysis of liver sections, and histopathological changes were examined. RESULTS: SAE exhibited strong antitumor initiation and antitumor promotion activities. It suppressed CYP1A, scavenged peroxyl and hydroxyl radicals, induced macrophage proliferation, suppressed macrophage binding to FITC-LPS, inhibited nitric oxide generation, showed specific cytotoxicity to human breast MCF-7 adenocarcinoma cells, and disturbed the cell cycle phases (S and G2/M phases) in association with an increased percentage of apoptotic/necrotic MCF-7 cells. Over a short time period, DEN stimulated liver cancer initiation, but SAE treatment reduced the DEN-induced histopathological alterations and inhibited CYP1A and GSTP. CONCLUSION: SAE extract has the potential for use as an alternative to AE in health foods to provide cancer chemoprevention in populations at risk for cancer.

Preparation of External Stimulus-Free Gelatin-Catechol Hydrogels with Injectability and Tunable Temperature Responsiveness.

Gelatin is one of the most versatile biopolymers in various biomedical applications. A gelatin derivative gelatin-catechol (Gel-C) was developed in this study to further optimize its chemical and physical properties such as thermal reversibility and injectability. We found that Gel-C remains in a solution state at room temperature, and the temperature-dependent gelation capability of gelatin is well preserved in Gel-C. Its gel-forming temperature decreased to about 10 °C (about 30 °C for gelatin), and a series of gelatin derivatives with different gel-forming temperatures (10-30 °C) were formed by mixing gelatin and Gel-C in different ratios. Additionally, irreversible Gel-C hydrogels could be made without the addition of external stimuli by combining the physical cross-linking of gelatin and the chemical cross-linking of catechol. At the same time, properties of Gel-C hydrogels such as thermal reversibility and injectability could be manipulated by controlling the temperature and pH of the precursor solution. By simulating the formation of an irreversible Gel-C hydrogel in vivo, an in situ gelling system was fabricated by lowering the local temperature of the hydrogel with cold shock, thus realizing targeted and localized molecular delivery with prolonged retention time. This simple system integrated with the temperature responsiveness of gelatin and chemical cross-linking of catechol groups thus provides a promising platform to fabricate an in situ gelling system for drug delivery.

Identification and validation of LGR5-binding peptide for molecular imaging of gastric cancer.

Leucine-rich repeat-containing G-protein coupled receptor 5 (LGR5) is a stem cell marker in gastric cancer. In this study, we aimed to produce the LGR5-targeting peptide probe for the use of molecular imaging for gastric cancer. We used phage display libraries to produce a LGR5-specific peptide probe. This peptide was validated for targeting gastric cancer with in vitro and in vivo studies. This peptide was tagged with fluorescein isothiocyanate (FITC) and cyanine 5.5 (Cy5.5). We used two normal and three gastric cancer cell lines. Immunocytochemistry (ICC) and fluorescence-activated cell sorting (FACS) analysis were used to validate the target specificity of the peptide. After three rounds of bio-panning, we found a novel 7-mer peptides, IPQILSI (IPQ∗). FITC-conjugated IPQ∗ showed 2 to 10 times higher fluorescence in gastric cancer cells vs. control cells in ICC. This discrimination was consistently observed using Cy5.5-conjugated IPQ∗ in ICC. FACS analysis showed right shift of peak point in gastric cancers compared to the control cells. In the peritoneal metastasis animal model, we could find Cy5.5-conjugated IPQ∗ accumulated specifically to gastric tumors. In conclusion, IPQ∗ peptide showed a specific probe for gastric cancer diagnosis. This probe can be applied to theragnosis for gastric cancer diagnosis including peritoneal metastasis.

An inhibitory immunoreceptor, Allergin-1, suppresses FITC-induced type 2 contact hypersensitivity.

Although allergic contact dermatitis (ACD) is the most common T cell-mediated inflammatory responses against an allergen in the skin, the pathogenesis of ACD remains incompletely understood. In the sensitization phase in ACD, hapten-bearing dermal dendritic cells (DCs) play a pivotal role in the transport of an antigen to the lymph nodes (LNs), where they present the antigen to naïve T cells. Here we report that Allergin-1, an inhibitory immunoreceptor containing immunoreceptor tyrosine-based inhibitory motif (ITIM) in the cytoplasmic region, is highly expressed on dermal DCs. Mice deficient in Allergin-1 exhibited exacerbated fluorescein isothiocyanate (FITC)-induced type 2 contact hypersensitivity (CHS) such as ear swelling and skin eosinophilia. Allergin-1-deficient mice also showed larger numbers of CD4+ T cells and FITC-bearing DCs and greater expressions of type 2 cytokines, including IL-5, IL-10 and IL-13, in the draining LNs than did wild type mice. In sharp contrast, Allergin-1-deficient mice showed comparable level of type 1 CHS induced by 2,4-dinitrofluorobenzene (DNFB). These results suggest that Allergin-1 on dermal DC inhibits type 2, but not type 1, immune responses in the sensitization phase of CHS.

Fluorescently conjugated annular fibrin clot for multiplexed real-time digestion analysis.

Impaired fibrinolysis has long been considered as a risk factor for venous thromboembolism. Fibrin clots formed at physiological concentrations are promising substrates for monitoring fibrinolytic performance as they offer clot microstructures resembling in vivo. Here we introduce a fluorescently labeled fibrin clot lysis assay which leverages a unique annular clot geometry assayed using a microplate reader. A physiologically relevant fibrin clotting formulation was explored to achieve high assay sensitivity while minimizing labeling impact as fluorescence isothiocyanate (FITC)-fibrin(ogen) conjugations significantly affect both fibrin polymerization and fibrinolysis. Clot characteristics were examined using thromboelastography (TEG), turbidity, scanning electron microscopy, and confocal microscopy. Sample fibrinolytic activities at varying plasmin, plasminogen, and tissue plasminogen activator (tPA) concentrations were assessed in the present study and results were compared to an S2251 chromogenic assay. The optimized physiologically relevant clot substrate showed minimal reporter-conjugation impact with nearly physiological clot properties. The assay demonstrated good reproducibility, wide working range, kinetic read ability, low limit of detection, and the capability to distinguish fibrin binding-related lytic performance. In combination with its ease for multiplexing, it also has applications as a convenient platform for assessing patient fibrinolytic potential and screening thrombolytic drug activities in personalized medical applications.

One-step construction of circularized nanodiscs using SpyCatcher-SpyTag.

Circularized nandiscs (cNDs) exhibit superb monodispersity and have the potential to transform functional and structural studies of membrane proteins. In particular, cNDs can stabilize large patches of lipid bilayers for the reconstitution of complex membrane biochemical reactions, enabling the capture of crucial intermediates involved in synaptic transmission and viral entry. However, previous methods for building cNDs require multiple steps and suffer from low yields. We herein introduce a simple, one-step approach to ease the construction of cNDs using the SpyCatcher-SpyTag technology. This approach increases the yield of cNDs by over 10-fold and is able to rapidly generates cNDs with diameters ranging from 11 to over 100 nm. We demonstrate the utility of these cNDs for mechanistic interrogations of vesicle fusion and protein-lipid interactions that are unattainable using small nanodiscs. Together, the remarkable performance of SpyCatcher-SpyTag in nanodisc circularization paves the way for the use of cNDs in membrane biochemistry and structural biology.

Study on the pharmacokinetics of mulberry fruit polysaccharides through fluorescence labeling.

A sensitive and efficient fluorescence labeling method was developed and validated for the microanalysis and detection of polysaccharides. Fluorescein isothiocyanate (FITC) was successfully labeled on mulberry fruit polysaccharides (MFP) through a reductive amination reaction with the assistant of tyramine. The fluorescent labeled polysaccharides (FMFP) was identified by fluorescence, UV-visible, flourier transform infrared (FT-IR) and 1H NMR spectrum. Results demonstrated that the labeling efficiency of FMFP was 0.32%, and the FMFP was stable in simulated digestion fluid without cytotoxicity. The pharmacokinetics and biodistribution after administration were analyzed in rats, which indicated that the FMFP obtained could be absorbed in a short time (tmax 0.50 h) but eliminated slowly (t1/2 8.77 ± 1.38 h). At 24 h after administration, the polysaccharide could be tested mainly in intestine, stomach, liver and kidney. The FITC labeling method lays a foundation for investigating the absorption and metabolism of MFP, and provides references for the microanalysis research of bioactive polysaccharides.

Site-specific internal protein labeling through trans-splicing.

Atypical S1 and S11 split inteins have been used for N-terminal or C-terminal protein labeling. Here we reported a novel site-specific internal protein labeling method based on two atypical split inteins, Ter DnaE3 S11 and Rma DnaB S1. Protein-peptide trans-splicing activity was first demonstrated in vitro between a short peptide (Flag tag, FLAG) and two recombinant proteins (Maltose binding protein, MBP, and Thioredoxin, Trx) by trans-splicing between MBP-TE3S11N (MBP-N fragment of Ter DnaE3 S11), TE3S11C-FLAG-RBS1N (C fragment of Ter DnaE3 S11-FLAG-N fragment of Rma DnaB S1), and RBS1C-Trx (C fragment of Rma DnaB S1-Trx). To minimize the middle synthetic peptide (TE3S11C-linker-RBS1N), we reduced the number of native extein amino acids, which may play a role in protein trans-splicing. The results showed at least 3 (CKG) native extein amino acids were required for detectable trans-splicing activity. This method was further demonstrated to be effective in facilitating the incorporation of fluorescent probe (FITC) to the internal site of recombinant protein, generating the FITC-labeled protein. Besides the fluorescent group, these two split inteins can also be useful for adding any desirable chemical groups into a protein of interest, which may include biotin, modified and unnatural amino acids, or drug molecules.

Evaluation of autofluorescence quenching techniques on formalin- fixed chicken tissues.

Autofluorescence (AF) in formalin-fixed and paraffin-embedded tissues limit their use in immunofluorescence staining techniques. Various methods have been used to reduce AF in human and animal tissues but no protocol has been optimized for avian tissues. The present study was undertaken to evaluate different treatment methods including ammonium chloride, glycine, Trypan blue, sodium borohydride, Sudan Black B, potassium permanganate, LED light, cupric sulphate combined with glycine, ammonium chloride and cupric sulphate in reducing AF in FFPE chicken tissues for the detection of FITC labelled antibodies against immune cell markers. Chicken tissues including conjunctiva, trachea and Harderian gland presented intense non-homogenous AF in cells resembling erythrocytes, connective cells and melanocytes. Only Sudan Black B effectively reduced AF in FFPE tissues; however, no specific fluorescent signal was observed for six FITC labelled antibodies against immune cell markers. Specific fluorescent signal from the FITC-labelled antibodies was observed in frozen chicken tissue sections with minimal AF, suggesting that the AF in FFPE tissues is related to the use of formaldehyde fixatives. In conclusion, this study demonstrates for the first time that AF quenching methods commonly used for other animal species are not appropriate for use in avian tissues and that frozen tissue sections are recommended for immunofluorescence staining techniques in poultry.

A Thrombin-Responsive Nanoprobe for In Vivo Visualization of Thrombus Formation through Three-Dimensional Optical/Computed Tomography Hybrid Imaging.

Early spontaneous detection of thrombin activation benefits precise theranostics for thrombotic vascular disease. Herein, a thrombin-responsive nanoprobe conjugated by a FITC dye, PEGylated Fe3O4 nanoparticles, and a thrombin-sensitive peptide (LASG) was constructed to visualize thrombin activation and subsequent thrombosis in vivo. The FITC dye was linked to the LASG coated on the Fe3O4 nanoparticles for sensing the thrombin activity via the Förster resonance energy transfer effect. In vitro fluorescence imaging showed that the fluorescence signal intensity increased significantly after incubation with thrombin in contrast to that of the control group (p < 0.05), and the signal intensity was enhanced with the increase in thrombin concentration. Further in vivo fluorescence imaging also revealed that the signal elevated markedly in the left common carotid artery (LCCA) lesion of the mice thrombosis model after nanoprobe injection, in contrast to that of the control + nanoprobe group (p < 0.05). Moreover, the thrombin inhibitor bivalirudin could decrease the filling defect of the LCCA. Three-dimensional fusion images of micro-CT and fluorescence confirmed that filling defects in the LCCA were nicely colocalized with fluorescence signal caused by nanoprobes. The nanoplatform based on a thrombin-activatable visualization system could provide smart responsive and dynamic imaging of thrombosis in vivo.

Hydrogel-Induced Cell Membrane Disruptions Enable Direct Cytosolic Delivery of Membrane-Impermeable Cargo.

Intracellular delivery of membrane-impermeable cargo offers unique opportunities for biological research and the development of cell-based therapies. Despite the breadth of available intracellular delivery tools, existing protocols are often suboptimal and alternative approaches that merge delivery efficiency with both biocompatibility, as well as applicability, remain highly sought after. Here, a comprehensive platform is presented that exploits the unique property of cationic hydrogel nanoparticles to transiently disrupt the plasma membrane of cells, allowing direct cytosolic delivery of uncomplexed membrane-impermeable cargo. Using this platform, which is termed Hydrogel-enabled nanoPoration or HyPore, the delivery of fluorescein isothiocyanate (FITC)-dextran macromolecules in various cancer cell lines and primary bovine corneal epithelial cells is convincingly demonstrated. Of note, HyPore demonstrates efficient FITC-dextran delivery in primary human T cells, outperforming state-of-the-art electroporation-mediated delivery. Moreover, the HyPore platform enables cytosolic delivery of functional proteins, including a histone-binding nanobody as well as the enzymes granzyme A and Cre-recombinase. Finally, HyPore-mediated delivery of the MRI contrast agent gadobutrol in primary human T cells significantly improves their T1 -weighted MRI signal intensities compared to electroporation. Taken together, HyPore is proposed as a straightforward, highly versatile, and cost-effective technique for high-throughput, ex vivo manipulation of primary cells and cell lines.

Simultaneous determination of ochratoxin A and enterotoxin A in milk by magnetic nanoparticles based fluorescent immunoassay.

Ochratoxin A (OTA) and staphylococcus enterotoxin A (SEA) are highly toxic contaminants and have induced human health problems. They commonly occur in milk and milk products. A competitive fluorescent immunoassay was developed for rapid and simultaneous determination of these toxins in milk samples. The procedure was based on the competitive immunoreactions between antigens in sample and antigen-fluorescent dye conjugates with immobilised antibodies on magnetic nanoparticles (MNPs). Each monoclonal antibody specifically recognises its corresponding toxin (antigen), and there is no cross-reactivity in the assay. First, monoclonal antibodies against OTA and SEA were produced. The activity of the obtained antibodies was determined by fluorescent-linked immunosorbent assay. Then, the monoclonal antibodies were immobilised on MNPs. The amounts of immobilised anti-OTA antibody and anti-SEA antibody were determined to be 20 and 22 µg mL-1, respectively. The antigen-fluorescent dye conjugates OTA-OVA-ATTO620 and SEA-FITC were prepared. The optimal amount of immobilised antibodies for competitive immunoassay was determined. It was found that the linear range of OTA in buffer was larger (0.001-100 ng mL-1) than the linear range of SEA (0.001-20 ng mL-1). The results for simultaneous determination of OTA and SEA in sixfold diluted milk were almost the same in buffer; the linear range for OTA was from 0.005  to 100 ng mL-1 and for SEA from 0.005  to 20 ng mL-1. The detection limit for both OTA and SEA in milk was 0.004 ng mL-1. The developed method took half the time of the individual assays (20 min). The assay was evaluated using spiked milk samples. The influences of somatic cell count, fat, pH and protein concentration in milk on immunoassay were studied. In summary, this developed immunoassay could provide an effective and rapid approach for detecting multi-toxins in milk samples.