Diagnostic accuracy of artificial intelligence versus manual detection in marginal bone loss around fixed semicolon. a systematic review.

Objectives: The aim of the review is to evaluate the existing precision of artificial intelligence (AI) in detecting Marginal Bone Loss (MBL) around prosthetic crowns using 2-Dimentional radiographs. It also summarises the recent advances and future challenges associated to their clinical application. Methodology: A literature survey of electronic databases was conducted in November 2023 to recognize the relevant articles. MeSH terms/keywords were used to search ("panoramic" OR "pantomogram" OR "orthopantomogram" OR "opg" OR "periapical") AND ("artificial intelligence" OR "deep" OR "machine" OR "automated" OR "learning") AND ("periodontal bone loss") AND ("prosthetic crown") in PubMed database, SCOPUS, COCHRANE library, EMBASE, CINAHL and Science Direct. RESULTS: The searches identified 49 relevant articles, of them 5 articles met the inclusion criteria were included. The outcomes measured were sensitivity, specificity and accuracy of AI models versus manual detection in panoramic and intraoral radiographs. Few studies reported no significant difference between AI and manual detection, whereas majority demonstrated the superior ability of AI in detecting MBL. CONCLUSIONS: AI models show promising accuracy in analysing complex datasets and generate accurate predictions in the MBL around fixed prosthesis. However, these models are still in the developmental phase. Therefore, it is crucial to assess the effectiveness and reliability of these models before recommending their use in clinical practice.

High insertion torque versus regular insertion torque: early crestal bone changes on dental implants in relation to primary stability-a retrospective clinical study.

The aim of the presented retrospective study was to evaluate the early crestal bone changes around an implant type designed for high primary stability. A total number of 111 implants placed clinically were evaluated regarding insertion torque, bone density, implant stability quotient (ISQ) and early crestal bone loss from standardized digital radiographs. The implants were allocated in two groups: the "regular torque " group contained all implants that achieved less than 50 Ncm as final insertion torque (n = 63) and the "high torque" group contained the implants that achieved 50-80 Ncm (n = 48). To avoid possible damage either to the implant´s inner connection or to the bone by application of excessive force, a limit of 80 Ncm was set for all surgeries. All implants underwent submerged healing for three months. ISQ measurements and standardized digital radiographs were taken at day of insertion and at day of second stage surgery. The bone loss was measured on the mesial and distal aspect of the implant. The data evaluation showed the following results: Mean bone loss was 0.27 ± 0.30 mm for the high torque group and 0.24 ± 0.27 mm for the regular torque group. The difference was not statistically significant (p = 0.552). In the two groups, no complications nor implant loss occurred. For the evaluated implant type, there was no significant difference in crestal bone changes and complication rate between high and regular insertion torque in the early healing period.

Impact of acquisition volume on cone beam computed tomography imaging of marginal bone: an ex vivo study.

OBJECTIVE: The current study explores whether there is a clinically relevant distinction in the measurement of marginal bone loss when comparing high-dose (HD) versus low-dose (LD) cone beam computed tomography (CBCT) protocols in small and large acquisition volumes.  Material and Methods: CBCTs of four human cadaveric preparates were taken in HD and LD mode in two different fields of view 8 × 8 cm2 (LV) and 5 × 5 cm2 (SV). In total, 43 sites of 15 teeth were randomly chosen, and marginal bone loss was measured twice in all protocols at 43 sites of 15 teeth by one calibrated investigator. Bland-Altman plots and Lin's concordance correlation coefficient (CCC) were calculated to assess the extent of agreement of the measurements. Additionally, the rater scored the certainty in each of the measurements. RESULTS: For HD-CBCT CCC of measurements obtained using SV versus LV was 0.991. CCC of measurements obtained using SV versus LV of LD-CBCT was 0.963. Both CCC values indicated excellent agreement between the two volumes in both protocols.  CCC also indicated high intramodality correlation between HD-CBCT and LD-CBCT independent of the acquisition volume (0.963 - 0.992). Bland-Altman plots also indicated no substantial differences. Results of certainty scoring showed significant differences (p = 0.004 (LV), p < 0.001(SV)) between the LD and HD-CBCT. CONCLUSIONS: Accuracy of measurements of bone loss shows no clinical noticeable effects depending on the CBCT volume in this ex vivo study. There appears to be no relevant advantage of SV over LV, neither in HD-CBCT nor in LD-CBCT and additionally no relevant advantage of HD versus LD in visualizing marginal bone loss.

A Biodegradable Tissue Adhesive for Post-Extraction Alveolar Bone Regeneration under Ongoing Anticoagulation-A Microstructural Volumetric Analysis in a Rodent Model.

In addition to post-extraction bleeding, pronounced alveolar bone resorption is a very common complication after tooth extraction in patients undergoing anticoagulation therapy. The novel, biodegenerative, polyurethane adhesive VIVO has shown a positive effect on soft tissue regeneration and hemostasis. However, the regenerative potential of VIVO in terms of bone regeneration has not yet been explored. The present rodent study compared the post-extraction bone healing of a collagen sponge (COSP) and VIVO in the context of ongoing anticoagulation therapy. According to a split-mouth design, a total of 178 extraction sockets were generated under rivaroxaban treatment, of which 89 extraction sockets were treated with VIVO and 89 with COSP. Post-extraction bone analysis was conducted via in vivo micro-computed tomography (µCT), scanning electron microscopy (SEM), and energy-dispersive X-ray spectroscopy (EDX) after 5, 10, and 90 days. During the observation time of 90 days, µCT analysis revealed that VIVO and COSP led to significant increases in both bone volume and bone density (p ≤ 0.001). SEM images of the extraction sockets treated with either VIVO or COSP showed bone regeneration in the form of lamellar bone mass. Ratios of Ca/C and Ca/P observed via EDX indicated newly formed bone matrixes in both treatments after 90 days. There were no statistical differences between treatment with VIVO or COSP. The hemostatic agents VIVO and COSP were both able to prevent pronounced bone loss, and both demonstrated a strong positive influence on the bone regeneration of the alveolar ridge post-extraction.

[A novel periodontal endoscopy-aided non-incisional periodontal regeneration technique：a case series study].

PURPOSE: To investigate the effect of endoscopy-aided non-incisional periodontal regeneration technique (NIT) in the treatment of alveolar bone angular resorption. METHODS: Thirteen patients with severe periodontitis(13 diseased teeth) were selected. All patients had alveolar bone angular resorption on adjacent surface. The patients received NIT treatment 6 weeks after periodontal primary therapy. The visualization of subgingival environment was acquired by the periodontal endoscopy. Following the removal of the subgingival plaque, calculus and intra-bony granulation tissue, bone grafting materials were placed into the intra-bony defects with the assistance of a delicate gingival protector. No flap was elevated and no sutures were applied. Probing depth (PD), gingival recession (GR), clinical attachment level (CAL), as well as radiographic parameters were evaluated at baseline and 2 years after treatment. SPSS 22.0 software package was used for data analysis. RESULTS: At 2-years follow-up, an average CAL gain of (3.65±2.10) mm (P＜0.001), PD reduction of (4.42±1.66) mm (P＜0.001), and minimal increase in GR of (0.38±0.87) mm (P=0.25) were observed. Alveolar bone was significantly improved at 2-years follow-up on radiographs (P＜0.001). CONCLUSIONS: For angular resorption site of alveolar bone, NIT treatment can obtain good periodontal regeneration results without flap inversion.

[Analysis of the correlation between peri-implant probing depth and radiographic bone level].

Objective: To evaluate the correlation between peri-implant probing depth (PPD) and radiographic bone level (rBL) in implants with peri-implantitis. Methods: From January 2019 to December 2022, 24 patients with 30 implants who suffered from peri-implantitis at the Department of Periodontology, Peking University School and Hospital of Stomatology were included in the present research. SPSS 26.0 software was used to simple random sampling select 30 healthy implants from which with electronic examination records in Department of Periodontology, Peking University School and Hospital of Stomatology from January 2007 to June 2023 as the control group. On the premise of retaining the implant prosthesis, PPD (distance between pocket bottom and peri-implant soft tissue margin) was examined using a Williams periodontal probe with a light force (about 0.2 N), and a total of 4 sites were recorded for each implant. Periapical radiography and cone beam CT were applied to measure the rBL (distance between the reference point at the neck of the implant and the apical point of the bone defect) and the width of the bone defect (DW), and the type of the bone defect was recorded. The correlation and consistency between the diagnosis of PPD and rBL were analyzed. Results: PPD was significantly correlated with rBL in a total of 60 implants in 180 sites (r=0.64, P<0.001). The chi-square test showed an 8.15-fold increase in the detection rate of PD≥6 mm at sites with rBL≥1 mm (P<0.001). Multivariate logistic regression analysis showed that rBL was still statistically associated with PPD after adjustment for jaw position and examination position of implants. Take rBL <1 mm as reference, the odds ratios (OR) of 1 mm≤rBL<2 mm, 2 mm≤rBL<3 mm and rBL≥3 mm group with PPD were 6.23 (P=0.014), 2.77 (P=0.183) and 10.87 (P=0.001), respectively. Conclusions: There is a positive correlation between PPD and rBL in implants with peri-implantitis. PPD can be used as a clinical examination index to assist in estimating the level of peri-implant bone under the premise of retaining the prosthesis.

Dental findings frequently overlooked in sinus computed tomography reports.

OBJECTIVES: Computed tomography (CT) and cone beam computed tomography (CBCT) represent the main imaging modalities used in rhinosinusitis patients and are also important in odontogenic sinusitis (OS) diagnostics. Reports, however, often lack information on dentition. Here, we aimed to determine how maxillary dentition is initially interpreted in rhinosinusitis patients' CT/CBCT reports and which dental findings in particular are potentially missed, thus needing more attention. STUDY DESIGN: CT/CBCT scans and radiological reports from 300 rhinosinusitis patients were analysed focusing specifically on dental findings. An experienced oral and maxillofacial radiologist re-evaluated the scans and the assessment was compared to the original reports using the McNemar test. RESULTS: From the 300 original reports, 233 (77.7%) mentioned the maxillary teeth. The most frequent statement (126/300, 42.0%) was 'no apical periodontitis'. Apical periodontitis and severe alveolar bone loss were significantly overlooked (p < 0.001). Amongst the 225 patients for whom the CT/CBCT report initially lacked information on dental pathology, 22 patients were diagnosed with apical periodontitis and 16 with severe alveolar bone loss upon re-evaluation. CONCLUSIONS: Dental pathology remains underreported in rhinosinusitis patients' CT/CBCT reports. Because these reports affect OS diagnostics, a routine and structured review of the maxillary teeth by a radiologist is necessary. Such examinations should encompass the maxillary teeth.

Radiographic evaluation of the distance between the restoration margin and the alveolar bone crest in dental implant patients: A retrospective study.

OBJECTIVES: The recently introduced Implant Disease Risk Assessment (IDRA) identifies a restoration margin-alveolar bone crest (RM-AC) distance of less than 1.5 mm as a key risk factor for peri­implant disease among eight major risk factors. This study evaluated the impact of the RM-AC distance on marginal bone loss (MBL) through radiographic analysis. METHODS: This retrospective cross-sectional study included 77 partially edentulous patients (39 females and 38 males, aged 22 to 76 years) with 202 platform-switched conical connection implants, cement-retained, implant-supported fixed restorations, and bone-level implants placed between 2016 and 2021. Dental implants were followed for least 6 to 36 months at follow up functional loading. Study participants were categorized into Group A (RM-AC distance ≤ 1.5 mm, n = 69) and Group B (RM-AC distance > 1.5 mm, n = 133). Twelve patients in Group B and five patients in Group A had no history of periodontal disease. The MBL was measured radiographically from the most coronal point of the implant shoulder to the alveolar bone, and the RM-AC distance was measured from the restoration margin to the alveolar crest. Multinomial logistic regression analysis was used for statistical evaluation. RESULTS: The incidence of MBL in Group A was statistically significant and 3.42 times higher than that in Group B. The rate of MBL in periodontitis Stage 4 was found to be 26.31 times higher than that in periodontitis Stage 2. The incidence of MBL was 6.097 and 5.02 times higher with increasing implant diameter and length, respectively. CONCLUSION: This study conclusively demonstrates that RM-AC distance ≤ 1.5 significantly increases the risk of MBL, particularly in patients with a history of periodontal disease. CLINICAL SIGNIFICANCE: This study highlights the critical role of maintaining an RM-AC distance greater than 1.5 mm in the prevention of MBL, particularly in patients with a history of periodontal disease. Since implant diameter and length have a significant impact on the risk of MBL, it emphasizes that implant demographics should also be carefully evaluated.

A cascading learning method with SegFormer for radiographic measurement of periodontal bone loss.

OBJECTIVE: Marginal alveolar bone loss is one of the key features of periodontitis and can be observed via panoramic radiographs. This study aimed to establish a cascading learning method with deep learning (DL) for precise radiographic bone loss (RBL) measurements at specific tooth positions. MATERIALS AND METHODS: Through the design of two tasks for tooth position recognition and tooth semantic segmentation using the SegFormer model, specific tooth's crown, intrabony portion, and suprabony portion of the roots were obtained. The RBL was subsequently measured by length through these three areas using the principal component analysis (PCA) principal axis. RESULTS: The average intersection over union (IoU) for the tooth position recognition task was 0.8906, with an F1-score of 0.9338. The average IoU for the tooth semantic segmentation task was 0.8465, with an F1-score of 0.9138. When the two tasks were combined, the average IoU was 0.7889, with an F1-score of 0.8674. The correlation coefficient between the RBL prediction results based on the PCA principal axis and the clinicians' measurements exceeded 0.85. Compared to those of the other two methods, the average precision of the predicted RBL was 0.7722, the average sensitivity was 0.7416, and the average F1-score was 0.7444. CONCLUSIONS: The method for predicting RBL using DL and PCA produced promising results, offering rapid and reliable auxiliary information for future periodontal disease diagnosis. CLINICAL RELEVANCE: Precise RBL measurements are important for periodontal diagnosis. The proposed RBL-SF can measure RBL at specific tooth positions and assign the bone loss stage. The ability of the RBL-SF to measure RBL at specific tooth positions can guide clinicians to a certain extent in the accurate diagnosis of periodontitis.

Immediately placed implants using simvastatin and autogenous tooth graft combination in periodontally compromised sites: a randomized controlled clinical trial.

OBJECTIVES: The present study aimed to assess clinically and radiographically the usage of autogenous tooth bone graft (ATBG) combined with and without Simvastatin (SMV) around immediately placed dental implants in periodontally compromised sites. METHODS: Thirty-nine patients required a single extraction of periodontally compromised tooth were divided into three groups (13 patients each). Group I received immediate implant placement (IIP) without grafting. Group II received IIP with ATBG filling the gap around IIP. Group III received SMV gel mixed with ATBG around IIP. Radiographic changes were reported at the baseline, 6-, and 12-months post-surgery. RESULTS: All implants achieved the success criteria with no complications. At 6- and 12-months post-surgery, group III showed a statistically lower mean ridge width loss compared to Group I and Group II (P < .001). Group II revealed less reduction in the mean alveolar ridge width compared to group I (P < .001). Group III showed a statistically significantly less MBL loss than group I and group II (P < .001). All groups showed a statistically significant increase in BD gain compared to baseline (P < .001). Group III showed statistically significant high BD compared to group II (P < .001). Group II showed statistically significantly higher mean BD gain than that of group I (P < .001). CONCLUSION: SMV combined with ATBG boosts the hard tissue parameters around dental implants over ATBG alone. Clinical trial registration was on August 1, 2021 (NCT04992416). CLINICAL RELEVANCE: ATBG with SMV in periodontally compromised sites could improve implant osseointegration and promote favorable changes in peri-implant tissues.

Regeneration of alveolar bone defects in the experimental pig model: A systematic review and meta-analysis.

OBJECTIVE: Pigs are emerging as a preferred experimental in vivo model for bone regeneration. The study objective was to answer the focused PEO question: in the pig model (P), what is the capacity of experimental alveolar bone defects (E) for spontaneous regeneration in terms of new bone formation (O)? METHODS: Following PRISMA guidelines, electronic databases were searched for studies reporting experimental bone defects or extraction socket healing in the maxillae or mandibles of pigs. The main inclusion criteria were the presence of a control group of untreated defects/sockets and the assessment of regeneration via 3D tomography [radiographic defect fill (RDF)] or 2D histomorphometry [new bone formation (NBF)]. Random effects meta-analyses were performed for the outcomes RDF and NBF. RESULTS: Overall, 45 studies were included reporting on alveolar bone defects or extraction sockets, most frequently in the mandibles of minipigs. Based on morphology, defects were broadly classified as 'box-defects' (BD) or 'cylinder-defects' (CD) with a wide range of healing times (10 days to 52 weeks). Meta-analyses revealed pooled estimates (with 95% confidence intervals) of 50% RDF (36.87%-63.15%) and 43.74% NBF (30.47%-57%) in BD, and 44% RDF (16.48%-71.61%) and 39.67% NBF (31.53%-47.81%) in CD, which were similar to estimates of socket-healing [48.74% RDF (40.35%-57.13%) and 38.73% NBF (28.57%-48.89%)]. Heterogeneity in the meta-analysis was high (I2 > 90%). CONCLUSION: A substantial body of literature revealed a high capacity for spontaneous regeneration in experimental alveolar bone defects of (mini)pigs, which should be considered in future studies of bone regeneration in this animal model.

Comparative evaluation of treatment of angular bone defect related to over-erupted tooth using guided tissue regeneration (GTR) followed by orthodontic intrusion (OI) versus OI followed by GTR: a controlled clinical trial.

BACKGROUND: Prematurity resulted from pathological migration of periodontally involved teeth with the loss of vertical stopping points between teeth, which can lead to teeth over eruption with dimensional changes favoring occlusal discrepancies. Therefore, evaluating and comparing the effect of guided tissue regeneration followed by orthodontic intrusion as opposed to orthodontic intrusion tracked by guided tissue regeneration in the treatment of an over-erupted tooth with angular bone loss. METHODS: Twenty teeth in ten cases were selected with at least two teeth with vertical over-eruption and angular bone loss with the presence of their opposing. In group one, ten teeth over-erupted were treated by guided tissue regeneration followed by orthodontic intrusion, whereas, in group two, ten teeth over-erupted were treated by orthodontic intrusion followed by guided tissue regeneration. They were evaluated clinically for pocket depth, bleeding on probing, and tooth mobility. Radiographical evaluation assessed by cone beam computed tomography. RESULTS: Clinically, there existed a statistically significant difference (P value ≤ 0.05) in favor of group one at six months post and in favor of group two at one year from re-evaluation regarding pocket depth and tooth mobility. Radiographically, in group one, there was a statistically significant improvement (P value ≤ 0.05) at six months post-guided tissue regeneration or orthodontic intrusion regarding defect depth and dimensional changes of the defect area, with a statistically significant difference (P value ≤ 0.05) in favor of group two at one year from re-evaluation phase regarding defect depth and defect area dimensional changes. CONCLUSION: There was a short-term improvement in group one, which deteriorated over a long period compared with group two, so it is preferable to start orthodontic intrusion before guided tissue regeneration.

Radiographic evaluation of marginal bone levels around implants supporting splinted fixed bridges: A retrospective study on 412 implants.

OBJECTIVES: The effect of the implant position within the prosthesis on bone remodeling is scarcely documented so far. Thus, the aim of the present study was to investigate whether central implants may suffer higher peri-implant marginal bone levels (MBL) compared to laterals in case of fixed splinted bridges supported by ≥ three implants. MATERIALS AND METHODS: Partially edentulous subjects rehabilitated with at least one fixed bridge supported by ≥ three dental implants were enrolled. MBL was assessed radiographically by means of intraoral radiographs acquired with phosphor plates and imported in a dedicated software. MBL was calculated as the distance between the implant platform level and the most coronal visible bone-to-implant contact. A three-level linear mixed effects model was used for investigating the fixed effect of patient-, prosthesis-, and implant-level variables on the MBL. RESULTS: Overall, 90 patients rehabilitated with 130 splinted fixed bridges supported by 412 implants were included. The median follow-up was 136 months. The mean peri-implant MBL resulted statistically significantly higher at central implants if compared to lateral implants (p < .01). The estimated MBL averages for central and external implants were 1.68 and 1.18 mm, respectively. The prosthesis-level variables suggested that a cement-retained bridge was prone to a significant 0.82 mm higher MBL than a screw-retained one. Implant surface showed an association with MBL changes, although less pronounced than implant retention. CONCLUSIONS: In case of ≥3 adjacent implants supporting splinted bridges, central implants were more predisposed to MBL compared to laterals. At the prosthesis level, implants supporting cement-retained bridges were statistically more susceptible to MBL compared to screw-retained ones. Surface characteristics can also influence MBL stability at the implant level.

Radiographic bone loss around dental implants: a large-cohort, long-term follow-up revealing prevalence and predictive factors.

OBJECTIVE: This retrospective study analyzed radiographic bone levels of 10,871 dental implants in a cohort of 4,247 patients over a 22-year period. The objectives of the study were to assess and explore risk factors associated with the radiographic bone level of dental implants. METHOD AND MATERIALS: A longitudinal observational cohort study based on data collected from 1995 to 2019 was conducted on implants placed by a single periodontist. Inclusion criteria included both partially and fully edentulous sites. Exclusion criteria were patients who were considered ASA 3 or greater. Information on medical and dental status prior to implant placement such as diabetes and smoking were included in the analysis. Implant factors such as the implant characteristics (length and diameter) and surgical site were recorded. The outcome assessed was the prevalence of bone loss around implants and any associative factors related to the bone loss. RESULTS: Overall, dental implants lost an average of 0.05 ± 0.38 mm of bone 2 to 3 years after placement and 0.21 ± 0.64 mm 8 years after placement. The soft tissue condition was evaluated using the Implant Mucosal Index (IMI), and bone loss around dental implants was significantly higher when bleeding on probing was multi-point and moderate, multi-point and profuse, and when infection with suppuration was recorded. The mean difference in bone level between smokers and nonsmokers was 0.26 mm (P < .01) over a 4-year period. A mean difference of 0.10 mm (P = .04) in bone loss over 4 years was found between those with an autoimmune disease compared to those without. The diameter of the implant and immediate loading of the dental implant did not influence the radiographic bone levels over time. CONCLUSIONS: This large dataset of dental implants highlights predictive risk factors for bone loss around dental implants and the impact these risk factors have on the implant bone level. Consideration of these risk factors by both the dental team and the patient prior to dental implant placement will promote success of the treatment.

Computational analysis of curcumin-mediated alleviation of inflammation in periodontitis patients with experimental validation in mice.

AIM: Using network pharmacology and experimental validation to explore the therapeutic efficacy and mechanism of curcumin (Cur) in periodontitis treatment. MATERIALS AND METHODS: Network pharmacology was utilized to predict target gene interactions of Cur-Periodontitis. Molecular docking was used to investigate the binding affinity of Cur for the predicted targets. A mouse model with ligature-induced periodontitis (LIP) was used to verify the therapeutic effect of Cur. Microcomputed tomography (micro-CT) was used to evaluate alveolar bone resorption, while western blotting, haematoxylin-eosin staining and immunohistochemistry were used to analyse the change in immunopathology. SYTOX Green staining was used to assess the in vitro effect of Cur in a mouse bone marrow-isolated neutrophil model exposed to lipopolysaccharide. RESULTS: Network pharmacology identified 114 potential target genes. Enrichment analysis showed that Cur can modulate the production of neutrophil extracellular traps (NETs). Molecular docking experiments suggested that Cur effectively binds to neutrophil elastase (ELANE), peptidylarginine deiminase 4 (PAD4) and cathepsin G, three enzymes involved in NETs. In LIP mice, Cur alleviated alveolar bone resorption and reduced the expression of ELANE and PAD4 in a time-dependent but dose-independent manner. Cur can directly inhibit NET formation in the cell model. CONCLUSIONS: Our research suggested that Cur may alleviate experimental periodontitis by inhibiting NET formation.

Periodontitis was associated with mesial concavity of the maxillary first premolar: a cross-sectional study.

The association between the anatomical features of teeth and the pathogenesis of periodontitis is well-documented. This study aimed to evaluate the influence of the mesial concavity of the maxillary first premolar on periodontal clinical indices and alveolar bone resorption rates. Employing a cross-sectional design, in 226 patients with periodontitis, we used cone beam computed tomography(CBCT) to examine the mesial concavity and alveolar bone resorption of 343 maxillary first premolar. Periodontal clinical indicators recorded by periodontal probing in the mesial of the maxillary first premolar in patients with periodontitis. Our findings indicate that the presence of mesial concavity at the cemento-enamel junction of the maxillary first premolar was not significantly influenced by either tooth position or patient sex (p > 0.05). Nonetheless, the mesial concavity at the cemento-enamel junction of the maxillary first premolar was found to exacerbate alveolar bone resorption and the inflammatory condition (p < 0.05). We infer that the mesial concavity at the cemento-enamel junction of the maxillary first premolar may contribute to localized alveolar bone loss and accelerate the progression of periodontal disease.

Customized three-dimensional printed ceramic bone grafts for osseous defects: a prospective randomized study.

Ridge resorption can result in insufficient bone volume for implant surgery, necessitating bone substitutes to restore the resorption area. Recent advances in computer-aided design and manufacturing enable the use of alloplastic bone graft materials with customizable compositions or shapes. This randomized study evaluated the clinical effectiveness of a customized three-dimensional (3D) printed alloplastic bone material. Sixty patients requiring guided bone regeneration for implant installation following tooth extraction due to alveolar bone resorption were recruited at two institutions. The participants were randomly allocated to either a group that received 3D-printed patient-customized bone graft material or a group that received conventional block bone graft material. Implant installation with bone harvesting was performed approximately 5 months after bone grafting. Histological and radiological assessments of the harvested bone area were performed. The experimental group had a significantly higher percent bone volume and a smaller tissue surface than the control group. Bone volume, bone surface, bone surface/volume ratio, bone surface density (bone surface/total volume), and bone mineral density did not differ significantly between groups. Patient-customized bone graft materials offer convenience and reduce patient discomfort. The findings suggest 3D-printed patient-customized bone graft materials could be used as an alternative for simpler bone grafting procedures.

Comparison of Peri-Implant Health Parameters among Obese and Non-Obese South Indian Population.

Implant therapy is gaining immense importance in people presenting with missing teeth due to its increased life expectancy. There is a high concern regarding the link between obesity and peri-implant diseases. The aim of this study was to assess the peri-implant health parameters among the obese and non-obese South Indian population. The cross-sectional study was conducted in Department of Implantology, Saveetha Dental College and Hospitals Chennai, India among 859 patients who reported between January 2022-November 2022 and had a minimum of single implant in function for at least 1 year after crown cementation. Among 859 patients, 428 were non-obese (Group A) and 431 were obese (Group B). Patient's data including the menopausal status was recorded. Clinical parameters including peri-implant probing depth (PPD), clinical attachment level (CAL) and radiographic parameter including alveolar bone level (ABL) was recorded and compared between both the groups using independent t-test. The mean PPD among non-obese and obese population were 2.58 ± 0.03 and 4.09 ± 0.04, respectively. The mean CAL among non-obese and obese population were 2.87 ± 0.02 and 4.19 ± 0.01, respectively. The mean ABL among non-obese and obese population were 2.06 ± 0.01 and 3.17 ± 0.03, respectively. Independent t-test revealed there was statistically significant difference in PPD (P = 0.04), CAL (P = 0.05) and ABL (P = 0.04). The present study suggests that the obese individuals demonstrated high peri-implant probing depth, clinical attachment loss and alveolar bone loss as compared to non-obese individuals.

Comparison of Alveolar Bone Level around Osseointegrated Dental Implants among Premenopausal and Postmenopausal Women: A 2-Year Study.

The success of dental implants is affected by bone quality and quantity at the dental implant site. The present study was done to assess the changes in alveolar bone level around osseointegrated dental implants over a period of 2 years among the premenopausal and postmenopausal women. This prospective clinical study was conducted among 50 female patients who reported between January 2020-June 2020 and had a single missing molar in maxillary or mandibular arch. Patients were categorized into 2 groups: premenopause patients (Group A; n = 25) and postmenopause patients (Group B; n = 25). Marginal bone loss (MBL) was recorded at baseline, 12 mo and 24 mo follow-up and compared between both the groups using independent t-test. ANOVA was done to compare MBL between different time periods. On intragroup comparison, a statistically significant difference was observed between different time periods in both Group A (P = 0.05) and Group B (P = 0.04). Also, on intergroup comparison, a statistically significant difference was observed in Group B from Group A at 12 mo and 24 mo (P < 0.05). Increase in marginal bone loss was observed among postmenopausal women. Therefore, clinicians should emphasize the need for oral hygiene maintenance among postmenopausal women for peri-implant health.

How do the dimensions of peri-implant mucosa affect marginal bone loss in equicrestal and subcrestal position of implants? A 1-year clinical trial.

INTRODUCTION: There is evidence that the apico-coronal implant position and the mucosal phenotype can affect the extent of peri-implant bone loss. This clinical trial analyzes the bone remodeling and marginal bone loss that occur around conical-connection implants placed equicrestally and subcrestally, assessing the effect of the peri-implant soft-tissue phenotype. METHODS: Fifty-one patients received 56 implants of distinct diameters (3.5 mm Ø n = 6; 4.3 mm Ø n = 41; 5 mm Ø n = 9) in the posterior part of the maxilla or mandible. The implants were placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, depending on the initial supracrestal tissue height (STH). After 3 months of non-submerged healing, single metal-ceramic screw-retained implant-supported crowns were placed. Longitudinal measurements of STH, mucosal thickness and keratinized mucosa width (KMW) were made at the time of implant placement (T0), crown placement (T1), and after 3 (T2) and 6 months (T3) of prosthetic loading. At each of these points, a radiographic evaluation of bone remodeling and marginal bone loss was also performed. RESULTS: STH was significantly greater for implants placed >1 mm subcrestally than for those placed 1 mm subcrestally. After 12 months of follow-up, a very significant (p < 0.001) loss of KMW was observed, in addition to a marginal bone loss of 0.08 ± 0.1, 0.15 ± 0.2, and 0.14 ± 0.2 mm in the groups placed equicrestally, 1 mm subcrestally and >1 mm subcrestally, respectively. After the multiple linear regression, marginal bone loss was found to depend primarily on KMW (ß = -0.43), while also being affected by STH (ß = 0.32) and implant diameter (ß = -0.28). CONCLUSIONS: Marginal bone loss may be influenced by the position with respect to the bone crest, as well as the KMW, STH, and implant diameter. However, more well-controlled studies are needed to verify these above-mentioned findings with different implant designs and connections.