RESUMO
BACKGROUND AND OBJECTIVE: TThe environment of a pregnant woman can affect not only fetal growth and development, but also diseases in childhood. Neonatal cord blood cytokines are commonly used to evaluate the immune development of neonates. The purpose of this study was to evaluate the effects of the environment and diet during pregnancy on IL-4 and IFN-γ in neonatal cord blood. METHOD: A total of 111 pregnant women participated in this study from April to November 2010. Allergy history, sensitization assessed by the skin prick test, dietary intake and indoor environment were evaluated. IL-4 and IFN-γ levels were measured in the complete cord blood of neonates using real-time PCR. RESULTS: There were 54 pregnant women with allergic disease. Both IL-4 and IFN-γ levels in neonatal cord blood were higher in samples from allergic mothers than in non-allergic mothers (p<0.05). The indoor environment and nutrient intake were not different between allergic and non-allergic mothers, except regarding carpet use. When the cytokine levels were divided into quartiles, lower folate and vitamin B6 intake was associated with the highest levels of IL-4 in neonatal cord blood (p<0.05), and higher folate and vitamin B6 intake was associated with highest levels of IFN-γ in neonatal cord blood. CONCLUSIONS: In this study, a strong association between IL-4 and IFN-γ levels in cord blood and the intake of folate and vitamin B6 was found, which indicates that food intake during pregnancy might have a strong influence on IL-4 and IFN-γ levels in cord blood, to a greater extent than environmental factors.
Assuntos
Dieta , Sangue Fetal/imunologia , Interferon gama/sangue , Interleucina-4/sangue , Efeitos Tardios da Exposição Pré-Natal/sangue , Adulto , Poluentes Ambientais , Feminino , Sangue Fetal/química , Humanos , Projetos Piloto , Gravidez , Efeitos Tardios da Exposição Pré-Natal/imunologia , Reação em Cadeia da Polimerase em Tempo RealRESUMO
As rates of multilingualism increase, interest in the field of Languages Other Than English (LOTEs) has been growing over the last few years. This study investigated the motivation held by Chinese undergraduate students for learning Korean as a LOTE using Dörnyei's L2 Motivational Self System (L2MSS). In total, 123 subjects responded to the 6-point Likert scale measuring their Korean learning motivation. The collected data were analyzed using SPSS 22. Logistic regression was applied for identifying variables that distinguished the first-year from the second-year learners of Korean, while canonical correlation analysis was used to examine the correlation between two sets of variables, the first set of dependent variables of the ideal L2 self and the ought-to L2 self, and the second set of independent variables of family influence, instrumentality promotion, instrumentality prevention, attitude to learning Korean, cultural interest, attitude toward community and integrativeness. Results showed that variables of family influence, cultural interest, and attitude to learning Korean were statistically significant in distinguishing the first-year from the second-year learners in terms of affective variables. In addition, canonical analysis showed that the dependent variable set of the ideal L2 self and the ought-to L2 self together shared nearly 69% variance with the independent variable set, indicating that the ideal L2 self and the ought-to L2 self together were highly related with these affective variables in the independent variable set. The findings of the current study suggest that more creative Korean language learning activities be adopted to help sustain the high levels of affect among Korean language learners.
RESUMO
ZnO is one of the most widely used inorganic sunscreens, owing to its fine particle size and UV light shielding capability. However, powders at nanosizes can be toxic and cause adverse effects. The development of non-nanosized particles has been slow. The present work investigated synthesis methods of non-nanosized ZnO particles for ultraviolet protection application. By altering the starting material, KOH concentration, and input speed, the ZnO particles can be obtained in different forms, including needle type, planar type, and vertical wall type. Cosmetic samples were made by mixing different ratios of synthesized powders. The physical properties and the UV blockage efficacy of different samples were evaluated using scanning electron microscopy (SEM), X-ray diffraction (XRD), particle size analyzer (PSA), and ultraviolet/visible (UV/Vis) spectrometer. The samples with 1:1 ratio of needle-type ZnO and vertical wall-type ZnO exhibited superior light blocking effect owing to improved dispersibility and prevention of particle agglomeration. The 1:1 mixed sample also complied with the European nanomaterials regulation due to the absence of nanosized particles. With superior UV protection in the UVA and UVB regions, the 1:1 mixed powder showed potential to be used as a main ingredient in UV protection cosmetics.
RESUMO
Optimization of equipment structure and process conditions is essential to obtain thin films with the required properties, such as film thickness, trapped charge density, leakage current, and memory characteristics, that ensure reliability of the corresponding device. In this study, we fabricated metal-insulator-semiconductor (MIS) structure capacitors using HfO2 thin films separately deposited by remote plasma (RP) atomic layer deposition (ALD) and direct-plasma (DP) ALD and determined the optimal process temperature by measuring the leakage current and breakdown strength as functions of process temperature. Additionally, we analyzed the effects of the plasma application method on the charge trapping properties of HfO2 thin films and properties of the interface between Si and HfO2. Subsequently, we synthesized charge-trapping memory (CTM) devices utilizing the deposited thin films as charge-trapping layers (CTLs) and evaluated their memory properties. The results indicated excellent memory window characteristics of the RP-HfO2 MIS capacitors compared to those of the DP-HfO2 MIS capacitors. Moreover, the memory characteristics of the RP-HfO2 CTM devices were outstanding as compared to those of the DP-HfO2 CTM devices. In conclusion, the methodology proposed herein can be useful for future implementations of multiple levels of charge-storage nonvolatile memories or synaptic devices that require many states.
RESUMO
To develop plasma-resistant glass materials suitable for semiconductor etching processes, we introduced alkaline earth oxides (ROs) into a Li2O-Al2O3-SiO2 (LAS) glass. Analysis of glass properties with respect to the additives revealed that among the analyzed materials, the LAS material in which Li2O was partially replaced by MgO (MLAS) exhibited the most favorable characteristics, including a low dielectric constant (6.3) and thermal expansion coefficient (2.302 × 10-6/°C). The high performance of MLAS is attributed to the high ionic field strength of Mg2+ ions, which restricts the movement of Li+ ions under the influence of electric fields and thermal vibrations at elevated temperatures. When exposed to CF4/O2/Ar plasma, the etching speed of RO-doped glasses decreased compared with that of quartz and LAS glass, primarily owing to the generation of a high-sublimation-point fluoride layer on the surface. Herein, MLAS demonstrated the slowest etching speed, indicating exceptional plasma resistance. X-ray photoelectron spectroscopy analysis conducted immediately after plasma etching revealed that the oxidation-to-fluorination ratio of Li was the lowest for MLAS. This observation suggests that the presence of Mg2+ ions in the plasma discharge inhibits the migration of Li+ ions toward the surface, thereby contributing to the excellent plasma resistance of MLAS.
RESUMO
The capability of assembling nanoparticles into a desired ordered pattern is a key to realize novel devices which are based not only on the unique properties of nanoparticles but also on the arrangements of nanoparticles. While two-dimensional arrays of nanoparticles have been successfully demonstrated by various techniques, a controlled way of building ordered arrays of three-dimensional (3D) nanoparticle structures remains challenging. We report that a variety of 3D nanoparticle structures can be formed in a controlled way based on the ion-induced focusing, electrical scaffold, and antenna effects from charged aerosols. Particle trajectory calculations successfully predict the whole process of 3D assembly. New surface enhanced Raman scattering substrates based on our 3D assembly were constructed as an example showing the viability of the present approach. This report extends the current capability of positioning nanoparticles on surface to another spatial dimension, which can serve as the foundation of future optical, magnetic, and electronic devices taking the advantage of multidimensions.
RESUMO
Piezoelectric material properties were optimized to develop materials for an ultrasonic vibrator targeting a high vibration efficiency. Herein, novel materials were developed using a composition represented by 0.08Pb(Ni1/3Nb2/3)O3-0.07Pb(Mn1/3Nb2/3)O3-0.85Pb(Zr0.5Ti0.5)O3 + 0.3 wt.% CuO + 0.3 wt.% Fe2O3 with 0.3 wt.% Sb2O3 doping. A ceramic shape with a thickness of 2 mm was optimized using finite element analysis software, and high values of coupling factors (0.54) and mechanical quality factors (1151) were obtained. This ceramic was used to fabricate a bio-beauty device (frequency = 1 MHz), and the manufactured ultrasonic vibrator indicated that the actuator oscillated with the maximum amplitude at a frequency of 1.06 MHz.
RESUMO
To achieve good long-term temperature stability in devices used in energy-conversion applications, this study is aimed at developing combined ceramics, referred to as PZN-PMN-PZT, comprising Pb(Zn1/3Nb2/3)O3 (PZN) and Pb(Mn1/3Nb2/3)O3 (PMN), which are typical relaxor ferroelectric materials, and Pb(Zr,Ti)O3 (PZT). The piezoelectric properties were compared based on several parameters according to the change in the composition ratio between relaxor materials, amounts of Sb2O3 dopant, and Zr/Ti ratio in the PZT system. Finally, we established optimal poling conditions to improve the electrical properties of the optimized piezoelectric material, based on the evaluation of ceramic properties according to the applied voltage during the poling process. The optimized composition of the investigated piezoelectric ceramics is represented by 0.14PZN-0.06PMN-0.80PbZr0.49Ti0.51 + 0.3 wt.% CuO + 0.3 wt.% Fe2O3 with 0.1 wt.% Sb2O3 doping, which yielded the superior properties (d33 = 361 pC/N, Qm = 1234, Tc = 306 °C).
RESUMO
HfxZr1-xO2 (HZO) thin films have excellent potential for application in various devices, including ferroelectric transistors and semiconductor memories. However, such applications are hindered by the low remanent polarization (Pr) and fatigue endurance of these films. To overcome these limitations, in this study, HZO thin films were fabricated via plasma-enhanced atomic layer deposition (PEALD), and the effects of the deposition and post-annealing temperatures on the density, crystallinity, and electrical properties of the thin films were analyzed. The thin films obtained via PEALD were characterized using cross-sectional transmission electron microscopy images and energy-dispersive spectroscopy analysis. An HZO thin film deposited at 180 °C exhibited the highest o-phase proportion as well as the highest density. By contrast, mixed secondary phases were observed in a thin film deposited at 280 °C. Furthermore, a post-annealing temperature of 600 °C yielded the highest thin film density, and the highest 2Pr value and fatigue endurance were obtained for the film deposited at 180 °C and post-annealed at 600 °C. In addition, we developed three different methods to further enhance the density of the films. Consequently, an enhanced maximum density and exceptional fatigue endurance of 2.5 × 107 cycles were obtained.
RESUMO
A multilayer piezoelectric material was fabricated using piezoelectric materials with low-temperature sintering capabilities and high piezoelectric coefficients to develop a functionally superior piezoelectric speaker with a large-displacement deformation. A soft relaxor was utilized to prepare the component materials, with the optimized composition of the investigated piezoelectric ceramics represented by 0.2Pb((Zn0.8Ni0.2)13Nb23)O3-0.8Pb(Zr0.5Ti0.5)O3. Li2CO3 was added to assist the low-temperature sintering conducted at 875 °C, which yielded a multilayer piezoelectric material with superior properties (d33 = 500 pC N-1, kp = 0.63, g33 = 44 mV N-1). A multilayer piezoelectric actuator with a single-layer thickness of ~40 µm and dimensions of 12 × 16 mm2 was fabricated by tape casting the prepared green sheets. Finite element analysis revealed that the use of a PEEK film and a smaller silicone-rubber film as a composite in the diaphragm realized optimal frequency-response characteristics; the vibrations generated by the piezoelectric element were amplified. The optimal structure obtained via simulations was applied to fabricate an actual piezoelectric speaker with dimensions of 20 × 24 × 1 mm3. The actual measurements exhibited a sound pressure level of ~75 dB and a total harmonic distortion ≤15% in the audible frequency range (250-20,000 Hz) at an applied voltage of 5 Vp.
RESUMO
The rapidly growing Li-ion battery market has generated considerable demand for Li-ion batteries with improved performance and stability. All-solid-state Li-ion batteries offer promising safety and manufacturing enhancements. Herein, we examine the effect of substitutional doping at three cation sites in garnet-type Li7La3Zr2O12 (LLZO) oxide ceramics produced by a sol-gel synthesis technique with the aim of enhancing the properties of solid-state electrolytes for use in all-solid-state Li-ion batteries. Building on the results of mono-doping experiments with different doping elements and sites-Al, Ga, and Ge at the Li+ site; Rb at the La3+ site; and Ta and Nb at the Zr4+ site-we designed co-doped (Ga, Al, or Rb with Nb) and tri-doped (Ga or Al with Rb and Nb) samples by compositional optimization, and achieved a LLZO ceramic with a pure cubic phase, almost no secondary phase, uniform grain structure, and excellent Li-ion conductivity. The findings extend the current literature on the doping of LLZO ceramics and highlight the potential of the sol-gel method for the production of solid-state electrolytes.
RESUMO
Porous films of metals and metal oxides exhibit larger surface areas and higher reactivities than those of dense films. Therefore, they have gained growing attention as potential materials for use in various applications. This study reports the use of a modified direct current magnetron sputtering method to form porous Zn-ZnO composite films, wherein a subsequent wet post-oxidation process is employed to fabricate pure porous ZnO films. The porous Zn-ZnO composite films were initially formed in clusters, and evaluation of their resulting properties allowed the optimal conditions to be determined. An oxygen ratio of 0.3% in the argon gas flow resulted in the best porosity, while a process pressure of 14 mTorr was optimal. Following deposition, porous ZnO films were obtained through rapid thermal annealing in the presence of water vapor, and the properties and porosities of the obtained films were analyzed. An oxidation temperature of 500 °C was optimal, with an oxidation time of 5 min giving a pure ZnO film with 26% porosity. Due to the fact that the films produced using this method are highly reliable, they could be employed in applications that require large specific surface areas, such as sensors, supercapacitors, and batteries.
RESUMO
In this study, a [0001]-plane planar-type ZnO ceramic powder material with a high aspect ratio ranging from 20:1-50:1 is synthesized using the electrolyte collected from zinc air battery power generation. This high aspect ratio may be due to the Zn(OH)2-4 anion dissolved in the electrolyte. The obtained planar-type ZnO exhibits excellent formulation stability and applicability, even when formulated as a cosmetic with a single inorganic ingredient. Compared to commercial ZnO or TiO2 powders, relatively better protection against infrared and ultraviolet (UV) radiation is realized due to its asymmetric characteristics, with a width of approximately 1 µm and thickness of tens of nm. The synthesized planar-type ZnO is mixed with nanosized ZnO or TiO2 commercial powders and formulated into various combinations to achieve a high UV protection rate and heat-blocking effect. In particular, the addition of planar-type ZnO to nanosized TiO2 powders increases the heat-blocking effect, and improves the applicability and formulation stability of the cosmetic formulation, despite the decrease in turbidity. Among all the ceramic powder combinations examined in this study, the best UV protection rate and heat-blocking effect are obtained when the synthesized planar-type ZnO is mixed with microsized and nanosized TiO2.
RESUMO
An ion-induced focusing mask under the simultaneous injection of ions and charged aerosols generates invisible electrostatic lenses around each opening, through which charged nanoparticles are convergently guided without depositing on the mask surface. The sizes of the created features become significantly smaller than those of the mask openings due to the focusing capability. It is not only demonstrated that material-independent nanoparticles including proteins can be patterned as an ordered array on any surface regardless of the conductive, nonconductive, or flexible nature of the substrate, but also that the array density can be increased. Highly sensitive gas sensors based on these focused nanoparticle patterns are fabricated via the concept.
Assuntos
Nanopartículas Metálicas/química , Análise em Microsséries/métodos , Íons , Análise em Microsséries/instrumentação , Eletricidade Estática , Propriedades de SuperfícieRESUMO
The formation of a residual layer under the imprinted patterns is commonly observed after the imprinting process. In order to utilize the imprinted patterns into the top-down process, the removal process of the residual layer using oxygen plasma is inevitable. However, the critical dimension of the imprinted patterns can be degraded during the residual layer removal process and this degradation becomes severer for smaller sized patterns. Zero residual layer imprinting therefore has advantages in nano-sized patterning. In this study, 70 nm-narrow polymer patterns with a height of 300 nm were successfully fabricated on a Si wafer without any residual layer using a high aspect ratio template and thin polymer resin layer, after which 70 nm-narrow Cr metal nanowires were formed on the Si wafer through the lift-off process.
RESUMO
The transparent characteristic of dye-sensitized solar cells (DSCs) makes them suitable for building integrated photovoltaic (BIPV) devices. However, the diffusive scattering layer, which is usually used to increase the efficiency of these devices, greatly lowers the transparency of the DSC. This paper described a two-dimensional (2D) photonic crystal (PC) reflector with a sub-micrometer characteristic length that can improve the efficiency of these devices while maintaining transparency. This 2D PCs were fabricated directly onto TiO2 photoelectrodes using colloidal lithography and have the structure of a nanopillar array. A nanopillar with a height of 430 nm was observed to selectively reflect up to 40% of the light of 400-500 nm wavelength. The perceived transparency of the 2D PC electrode was 52%, which is much higher than 0.3% of the conventional scattering layer. The DSC fabricated using the 2D PC electrode demonstrated a maximum photon-to-electric conversion efficiency of 8.23%, which is 18% higher than the pristine electrode. The 2D PC is a highly efficient and wavelength-selective reflector that can be applied to various photoelectric conversion devices.
RESUMO
Novel 3D metallic structures composed of multipetal flowers consisting of nanoparticles are presented. The control of surface plasmon hotspots is demonstrated in terms of location and intensity as a function of petal number for uniform and reproducible surfaceenhanced Raman spectroscopy (SERS) with high field enhancement.
Assuntos
Nanopartículas Metálicas/química , Análise Espectral Raman/métodos , Materiais Biomiméticos/química , Fenômenos Eletromagnéticos , Flores , Microscopia Eletrônica de Varredura , Ressonância de Plasmônio de SuperfícieRESUMO
Adequate amounts of nutrients during pregnancy are essential for maternal, fetal and child health. This study was conducted to investigate the intakes of iron and folate and the effect of supplements on anemia status during pregnancy. One hundred sixty five pregnant women completed questionnaires which included food frequencies and supplement use, and blood tests for hematologic indices. Pregnant women were divided into four groups based on the type of supplements; single nutrient group (S), multivitamins & minerals group (M), Single nutrient + multivitamins & minerals group (S+M), and no supplement group (N). Mean iron intake was 11.1 mg from food (46.3% of Recommended Nutrient Intakes, RNIs) and 66.8 mg from supplements. Mean folate intake was 231.2 µg from food (38.5% of RNI) and 822.7 µg from supplements. In the N group, the subjects who consumed iron and folate less than EAR were 85.7% and 95.2%, respectively. The subjects consumed iron more than UL were 81.0% in the S group, 88.9% in the M group, and 97.4% in the S+M group, and the subjects consumed folate more than UL were 4.8% in the S group, 1.6% in the M group, and 25.6% in the S+M group. The mean values of hemoglobin and hemotocrit in the M group were significantly higher than those in the N group. Despite the relatively high socio-economic status of the participants, overall intakes of iron and folate from food were far below the RNIs, suggesting that a supplement is needed for adequate nutritional status during pregnancy. A multivitamin supplement seems to be more effective than a single nutrient supplement such as iron or folic acid in the prevention of anemia. Further research is required to define the appropriate amount of supplemental iron and folic acid for Korean pregnant women.