Relative effectiveness of selected preenrichment media for the detection of Salmonella from leafy green produce and herbs.

Four buffered preenrichment media (BAX® System MP Media (BAX)), Universal Preenrichment Broth (UPB), modified Buffered Peptone Water (mBPW), and Buffered Peptone Water (BPW)) were compared with lactose broth (LB) in the Bacteriological Analytical Manual's (BAM) Salmonella culture method for the analysis of 9 leafy green produce and herb types. Artificially contaminated test portions were pre-enriched in each medium and the results were analyzed statistically using Fisher's Exact 2-tailed F test (p < 0.05) with pairwise comparisons. There was no difference in recovery of Salmonella from curly parsley and basil among the five media (p > 0.05). UPB was consistently among the most effective media for recovery of Salmonella from the nine produce types; however, S. Typhimurium and S. Newport were isolated from cabbage more frequently with mBPW than with UPB (p < 0.05). Comparisons of the results among the preenrichment media from all experimental trials, with leafy green produce and herbs, demonstrate that Salmonella is more effectively detected and isolated using buffered enrichments than with the currently recommended LB (p < 0.05). There were no significant differences among the buffered preenrichments for the detection of Salmonella-positive test portions of the produce tested (BAX (160 Salmonella-positive test portions/480 test portions), UPB (176/480), mBPW (184/480), BPW (169/480), LB (128/480))(p > 0.05).

Evaluation and comparison of rapid methods for the detection of Salmonella in naturally contaminated pine nuts using different pre enrichment media.

Foodborne outbreaks, involving pine nuts and peanut butter, illustrate the need to rapidly detect Salmonella in low moisture foods. However, the current Bacteriological Analytical Manual (BAM) culture method for Salmonella, using lactose broth (LB) as a pre enrichment medium, has not reliably supported real-time quantitative PCR (qPCR) assays for certain foods. We evaluated two qPCR assays in LB and four other pre enrichment media: buffered peptone water (BPW), modified BPW (mBPW), Universal Pre enrichment broth (UPB), and BAX(®) MP media to detect Salmonella in naturally-contaminated pine nuts (2011 outbreak). A four-way comparison among culture method, Pathatrix(®) Auto, VIDAS(®) Easy SLM, and qPCR was conducted. Automated DNA extraction techniques were compared with manual extraction methods (boiling or InstaGene™). There were no significant differences (P > 0.05) among the five pre enrichment media for pine nuts using the culture method. While both qPCR assays produced significantly (P ≤ 0.05) higher false negatives in 24 h pre enriched LB than in the other four media, they were as sensitive as the culture method in BPW, mBPW, UPB, and BAX media. The VIDAS Easy and qPCR were equivalent; Pathatrix was the least effective method. The Automatic PrepSEQ™ DNA extraction, using 1000 µL of pre enrichment, was as effective as manual extraction methods.

Prevalence, level and distribution of Salmonella in shipments of imported capsicum and sesame seed spice offered for entry to the United States: observations and modeling results.

In response to increased concerns about spice safety, the United States Food and Drug Administration (FDA) initiated research to characterize the prevalence and levels of Salmonella in imported spices. 299 imported dried capsicum shipments and 233 imported sesame seed shipments offered for entry to the United States were sampled. Observed Salmonella shipment prevalence was 3.3% (1500 g examined; 95% CI 1.6-6.1%) for capsicum and 9.9% (1500 g; 95% Confidence Interval (CI) 6.3-14%) for sesame seed. Within shipment contamination was not inconsistent with a Poisson distribution. Shipment mean Salmonella level estimates among contaminated shipments ranged from 6 × 10(-4) to 0.09 (capsicum) or 6 × 10(-4) to 0.04 (sesame seed) MPN/g. A gamma-Poisson model provided the best fit to observed data for both imported shipments of capsicum and imported shipments of sesame seed sampled in this study among the six parametric models considered. Shipment mean levels of Salmonella vary widely between shipments; many contaminated shipments contain low levels of contamination. Examination of sampling plan efficacy for identifying contaminated spice shipments from these distributions indicates that sample size of spice examined is critical. Sampling protocols examining 25 g samples are predicted to be able to identify a small fraction of contaminated shipments of imported capsicum or sesame seeds.

Recovery of Salmonella from internally and externally contaminated whole tomatoes using several different sample preparation procedures.

Studies were conducted to determine the relative effectiveness of whole soak [current Bacteriological Analytical Manual-(BAM) Salmonella method], quarter, stomach, and blend methods for the recovery of Salmonella organisms from internally and externally contaminated tomatoes. Tomatoes were subjected to three inoculation methods: surface inoculation, internal inoculation by injection, and immersion with single Salmonella serovars. The inoculation levels ranged from 1 to 100 CFU/tomato for surface and injection inoculation or 1 to 100 CFU/mL for immersion inoculation. Tomatoes were held for 3 days after inoculation at 2-6 degrees C prior to initiation of analysis. Contaminated tomatoes were soaked, quartered, stomached, and blended in appropriate portions of Universal Pre-enrichment broth, and incubated for 24 h at 35 +/- 2 degrees C. The BAM Salmonella culture method was followed thereafter, and tomatoes were treated as a low-microbial-load food. The stomaching procedure was significantly (P < 0.05) more effective than the whole soak procedure for recovery of internalized Salmonella from tomatoes (by injection). The blending procedure was arithmetically superior to the stomaching procedure for detection of internalized Salmonella from tomatoes (by immersion). The blending procedure showed the same effectiveness as the whole soak procedure for the detection of Salmonella on tomato surfaces. Comparisons between test portion-to-broth ratios (weight to volume) showed that a 1:3 test portion-to-broth ratio had a better buffering capacity for blended tomatoes than a 1:1 test portion-to-broth ratio. It is recommended that the current whole soak BAM tomato sample preparation procedure be replaced with a blending procedure and a 1:3 test portion-to-broth ratio.

Development and Validation of a Cultural Method for the Detection and Isolation of Salmonella in Cloves.

Detection of Salmonella in some spices, such as cloves, remains a challenge due to their inherent antimicrobial properties. The purpose of this study was to develop an effective detection method for Salmonella from spices using cloves as a model. Two clove varieties, Ceylon and Madagascar, were used in the study. Cloves were inoculated with Salmonella enterica subsp. enterica serotypes Montevideo, Typhimurium, or Weltevreden at about 1, 3, or 6 log CFU/25 g. Two test portion sizes, 10 and 25 g, were compared. After adding Trypticase soy broth (TSB) to the weighed cloves for preenrichment, three preenrichment methods were compared: cloves were left in the TSB for 24 h during preenrichment (PreE1), or the cloves-TSB mixture was shaken vigorously for 30 s (PreE2) or 60 s (PreE3), and the decanted material was transferred to a new bag for 24 h of preenrichment. The rest of the procedures were carried out according to the U.S. Food and Drug Administration Bacteriological Analytical Manual (BAM). At the low inoculation level (<1 log CFU/25 g), the detection rate was low across the three preenrichment methods, with the highest for PreE3 and lowest for PreE1. At the medium and high inoculation levels (3 and 6 log CFU/25 g), all samples from PreE2 and PreE3 were positive for Salmonella , whereas PreE1 produced only 12 positive samples from the 48 samples at the medium inoculation level and 38 positive samples from the 48 samples at the high inoculation level. Therefore, PreE3 with 25 g of cloves per sample was more effective than the other two tested methods. This newly designed method was then validated by comparing with the BAM method in six trials, with each trial consisting of 40 test samples. The results showed that PreE3 detected Salmonella from 88 of 120 inoculated test samples compared with only 31 positive from 120 test samples with the BAM method. Thus, our newly designed method PreE3 was more sensitive and easier to operate than the current BAM method for detection of Salmonella in cloves.

Evaluation of Three Real-Time PCR Methods for Detection of Salmonella from Cloves.

The purpose of the study was to evaluate three real-time PCR platforms for rapid detection of Salmonella from cloves and to compare three different DNA extraction methods. Six trials were conducted with two clove cultivars, Ceylon and Madagascar, and three Salmonella serotypes, Montevideo, Typhimurium, and Weltevreden. Each trial consisted of 20 test portions. The preenrichment cultures were used to perform PCR for comparison of the effectiveness of U.S. Food and Drug Administration, Pacific Regional Laboratory Southwest (FDA-PRLSW), Applied Biosystems Inc. (ABI) MicroSEQ, and GeneDisc platforms for detection of Salmonella. Three DNA extraction methods were used: standard extraction method for each PCR platform, boil preparation, and LyseNow food pathogen DNA extraction cards. The results from real-time PCR correlated well with FDA Bacteriological Analytical Manual culture assay results, with a wide range of cycle threshold (CT) values among the three PCR platforms for intended positive samples. The mean CT values for MicroSEQ (16.36 ± 2.78) were significantly lower than for PRLSW (20.37 ± 3.45) and GeneDisc (23.88 ± 2.90) (P < 0.0001). Pairwise comparisons between PCR platforms using different DNA extraction methods indicate that the CT values are inversely proportional to the relative DNA quantity (RDQ) yields by different platform-extraction combinations. The pairing of MicroSEQ and boil preparation generated the highest RDQ of 120 and the lowest average CT value of 14.48, whereas the pairing of GeneDisc and LyseNow generated the lowest RDQ of 0.18 and the highest average CT of 25.97. Boil preparation yielded higher RDQ than the other extraction methods for all three PCR platforms. Although the MicroSEQ platform generated the lowest CT values, its sensitivity was compromised by narrow separations between the positive and negative samples. The PRLSW platform generated the best segregation between positive and negative groups and is less likely to produce false results. In conclusion, FDA-PRLSW was the most efficient PCR assay for Salmonella detection, and boil preparation was the best method for DNA extraction.

Comparison of the Debonding Characteristics of Conventional and New Debonding Instrument used for Ceramic, Composite and Metallic Brackets - An Invitro Study.

BACKGROUND: Debonding procedure is time consuming and damaging to the enamel if performed with improper technique. Various debonding methods include: the conventional methods that use pliers or wrenches, an ultrasonic method, electrothermal devices, air pressure impulse devices, diamond burs to grind the brackets off the tooth surface and lasers. Among all these methods, using debonding pliers is most convenient and effective method but has been reported to cause damage to the teeth. Recently, a New Debonding Instrument designed specifically for ceramic and composite brackets has been introduced. As this is a new instrument, little information is available on efficacy of this instrument. The purpose of this study was to evaluate the debonding characteristics of both "the conventional debonding Pliers" and "the New debonding instrument" when removing ceramic, composite and metallic brackets. MATERIALS AND METHODS: One Hundred Thirty eight extracted maxillary premolar teeth were collected and divided into two Groups: Group A and Group B (n = 69) respectively. They were further divided into 3 subGroups (n = 23) each according to the types of brackets to be bonded. In subGroups A1 and B1{stainless steel};A2 and B2{ceramic};A3 and B3{composite}adhesive precoated maxillary premolar brackets were used. Among them {ceramic and composite} adhesive pre-coated maxillary premolar brackets were bonded. All the teeth were etched using 37% phosphoric acid for 15 seconds and the brackets were bonded using Transbond XT primer. Brackets were debonded using Conventional Debonding Plier and New Debonding Instrument (Group B). After debonding, the enamel surface of each tooth was examined under stereo microscope (10X magnifications). Amodifiedadhesive remnant index (ARI) was used to quantify the amount of remaining adhesive on each tooth. RESULTS: The observations demonstrate that the results of New Debonding Instrument for debonding of metal, ceramic and composite brackets were statistically significantly different (p = 0.04) and superior from the results of conventional debonding Pliers. CONCLUSION: The debonding efficiency of New Debonding Instrument is better than the debonding efficiency of Conventional Debonding Pliers for use of metal, ceramic and composite brackets respectively.

Evaluation of methods to prepare samples of leafy green vegetables for preenrichment with the Bacteriological Analytical Manual Salmonella culture method.

Three sample preparation procedures, soak, stomach, and blend, were evaluated using the Bacteriological Analytical Manual Salmonella culture method with eight types of leafy green produce. In the soak method, test portions were added to lactose broth without homogenization; in the stomach method, test portions were stomached with lactose broth; and in the blend method, test portions were blended with lactose broth. Twenty artificially contaminated test portions were analyzed with each procedure in individual experimental trials. The number of test portions identified as positive were compared among the procedures. Statistically significant differences were identified with Fisher's exact two-tailed F test (P < 0.05). Where differences did occur (P < 0.05), the soak procedure was the most effective or was at least as effective as homogenization by either blending or stomaching. Statistically significant differences most frequently occurred with romaine lettuce and cabbage; for these items, blending was significantly less effective than the soak procedure. Overall, for all of the produce types examined, results showed that the soak procedure was more effective than either of the homogenization procedures in recovering Salmonella from leafy green produce. Of the 540 test portions examined by each sample preparation method, 344 were positive for the presence of Salmonella by soaking, 293 by stomaching, and 232 by blending. We recommend that the soak procedure replace homogenization for the analysis of leafy green produce because the soak procedure is more productive than homogenization by either blending or stomaching of the leafy green produce types as reported herein.