Integration of N, P-doped carbon quantum dots with hydrogel as a solid-phase fluorescent probe for adsorption and detection of Fe3.

In this work, a novel nitrogen-phosphorus co-doped carbon quantum dots (N, P-CQDs) hydrogel was developed utilizing the as-synthesized N, P-CQDs and acrylamide (AM) with the existence of ammonium persulfate and N, N'-methylene bisacrylamide (N-MBA). In consistent with pure N, P-CQDs, the N, P-CQDs hydrogel also shows a dramatic fluorescence property with maximum emission wavelength of 440 nm, which can also be quenched after adsorbing iron ions (Fe3+). When the concentration of Fe3+is 0-6 mmol l-1, a better linear relationship between Fe3+concentration and the fluorescence intensities can be easily obtained. Additionally, the N, P-CQDs hydrogel exhibits better recyclability. This confirms that the N, P-CQDs hydrogel can be used for adsorbing and detecting Fe3+in aqueous with on-off-on mode. The fluorescence quenching mainly involves three procedures including the adsorption of Fe3+by hydrogel, integration of Fe3+with N, P-CQDs and the transportation of conjugate electrons in N, P-CQDs to the vacant orbits of Fe3+and the adsorption process follows a pseudo-second-order kinetic model confirmed in the Freundlich isotherm model. In conclusion, this work provides a novel route for synchronously removing and detecting the metal ions in aqueous by integrating N, P-CQDs with hydrogel with better recyclability.

Maize starch derived boron doped carbon spheres via facile solvothermal route as the photoluminescence sensor for determination of pH and Cr(VI).

In this work, a kind of boron doped carbon spheres (B-CSs) was successfully synthesized utilizing maize starch as carbon source and boric acid as dopant via facile solvothermal method. The chemical structure of the prepared B-CSs was systemically investigated by TEM, FT-IR, XRD, XPS and EDS. The synthesized B-CSs feature spherical structure with average size of ∼254 nm and exhibit strong photoluminescence (PL) with maximum emission at a wavelength of ∼453 nm under irradiation at 350 nm, leading to a quantum yield of 6.2%. Furthermore, the aqueous pH and Cr(VI) has a significantly various impact on the PL intensity of B-CSs, which can be flexibly utilized as the PL sensor for detection aqueous pH and Cr(VI) in aqueous. Particularly, the B-CSs have a desirable sensitivity and selectivity for detection of Cr(VI) with a low detection limit of ∼0.34µmol l-1. Conclusively, our work provides a novel and dual-functional fluorescent sensor for detection of the pH and toxic metal ions in water environment.

Penetration of Ciprofloxacin and Amikacin into the Alveolar Epithelial Lining Fluid of Rats with Pulmonary Fibrosis.

We determined the concentration-time profiles of ciprofloxacin and amikacin in serum and alveolar epithelial lining fluid (ELF) of rats with or without pulmonary fibrosis and investigated the effect of pulmonary fibrosis on the capacity for penetration of antimicrobials into the ELF of rats. Pulmonary fibrosis was induced in rats with a single intratracheal instillation of bleomycin. After intravenous injection of ciprofloxacin or amikacin, blood and bronchoalveolar lavage fluid samples were collected. Urea concentrations in serum and lavage fluid were determined using an enzymatic assay. Ciprofloxacin and amikacin concentrations were determined by high-performance liquid chromatography and liquid chromatography-tandem mass spectrometry, respectively. The mean ratio of ELF to plasma concentrations of ciprofloxacin at each time point in the normal group did not significantly differ from that in the pulmonary fibrosis group. However, the ratio of the ciprofloxacin area under the concentration-time curve from 0 to 24 h (AUC0-24) in ELF to the AUC0-24 in plasma was 1.02 in the normal group and 0.76 in the pulmonary fibrosis group. The mean ELF-to-plasma concentration ratios of amikacin at each time point in the normal group were higher than those in the pulmonary fibrosis group, reaching a statistically significant difference at 1, 2, and 4 h. The ratio of the AUC0-24 in ELF to the AUC0-24 in plasma was 0.49 in the normal group and 0.27 in the pulmonary fibrosis group. In conclusion, pulmonary fibrosis can influence the penetration of antimicrobials into the ELF of rats and may have a marked effect on the penetration of amikacin than that of ciprofloxacin.

Potent In Vitro Synergism of Fluconazole and Osthole against Fluconazole-Resistant Candida albicans.

Osthole is a natural coumarin that exhibits wide biological and pharmacological activities such as neuroprotective, osteogenic, immunomodulation, antitumor, and anti-inflammatory effects. In this study, we investigated the antifungal effects of osthole in vitro A checkerboard microdilution assay showed that osthole has significant synergistic effect with fluconazole against fluconazole-resistant Candida albicans Similar results were obtained from a growth curve assay. Meanwhile, XTT reduction assay demonstrated the synergism of fluconazole and osthole against C. albicans biofilm formation. Microarray results showed that the expression of genes involved in the oxidation-reduction process, energy metabolism, and transportation changed significantly after the combined treatment with fluconazole and osthole, and further results showed that endogenous reactive oxygen species (ROS) was significantly increased in the combination group. In conclusion, these results demonstrate the synergism of fluconazole and osthole against fluconazole-resistant C. albicans and indicate that endogenous ROS augmentation might contribute to the synergism of fluconazole and osthole.

Luteolin Promotes Cell Apoptosis by Inducing Autophagy in Hepatocellular Carcinoma.

BACKGROUND/AIMS: Hepatocellular carcinoma (HCC) is the most common primary liver malignancy and is a leading cause of cancer-related death worldwide. Luteolin, a flavonoid from traditional Chinese medicine, shows anti-cancer activity in many cancer cells, including HCC. However, the mechanism underlying the action of luteolin in HCC, especially its role in regulating cell autophagy, remains unclear. In the present study, we investigated the role of luteolin in regulating cell autophagy and the role of autophagy in luteolin-induced apoptosis. METHODS: The 3-(4,5-dimethythiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay (MTT) was used to investigate cell viability. Flow cytometry analysis was used to detect the cell cycle and cell apoptosis. Hoechst 33342 staining was used to detect cell apoptosis. Transmission electron microscopy was used to investigate autophagy. qRT-PCR and western blotting were used to detect apoptosis- and autophagy-related mRNAs and proteins. RESULTS: Luteolin reduced the viability of SMMC-7721 cells in a time and dose-dependent manner, and induced significant G0/G1-phase arrest. In addition, the results of flow cytometry analysis and Hoechst 33342 staining showed that luteolin treatment increased the number of apoptotic cells obviously, and the results of qRT-PCR and western blotting showed that luteolin treatment increased caspase 8 and decreased bcl-2 at the mRNA and protein levels. Furthermore, luteolin increased the number of intracellular autophagosomes, promoted LC3B-I conversion to LC3B-II, and increased Beclin 1 expression. Finally, co-treatment with the autophagy inhibitor chloroquine weakened the effects of luteolin on cell apoptosis. CONCLUSION: Luteolin induced apoptosis in human liver cancer SMMC-7721 cells, partially via autophagy. Thus, luteolin could be used as a regulator of autophagy in HCC treatment.

Oxidative Stress Is Involved in the Renal Dysfunction Induced by Sinoaortic Denervation in Rats.

The hypothesis that oxidative stress contributes to renal dysfunction in sinoaortically denervated (SAD) rats was investigated. Rats were sinoaortically denervated and received treatment with tempol (0.5 mmol/L in drinking water) for 8 weeks. Although the tempol treatment of the SAD rats had no significant effect on blood pressure or blood pressure viability, it significantly ameliorated the renal dysfunction as indicated by increases in renal blood flow (RBF) and the glomerular filtration rate (GFR) and reductions in plasma creatinine, blood urea nitrogen (BUN), the urine albumin excretion rate (UAE), and the glomerular sclerosis score (GSS). The SAD rats treated with tempol exhibited decreased plasma and renal malondialdehyde (MDA) levels and reduced renal formation of reactive oxygen species (ROS), superoxide (O2-), peroxynitrite (OONO-) and 3-nitrotyrosine. Treatment with tempol suppressed the nuclear concentration of nuclear factor-kappaB (NF-κB) and reduced the renal levels of macrophage chemoattractant protein 1 (MCP-1) and interleukin-6 (IL-6). The tempol-treated SAD rats exhibited decreased renal advanced glycation end product (AGE) levels and decreased receptor for advanced glycation end products (RAGE) protein expression. The tempol treatment of the SAD rats restored mitochondrial adenosine triphosphate (ATP) formation, DNA content, membrane integrity and the renal oxygen consumption rate. Additionally, the activities of superoxide dismutase (SOD), glutathione peroxidase (GPx), glutathione S epoxide transferase (GST), and catalase were decreased, and the activities of xanthin oxidase (XO) and reduced nicotinamide adenine dinucleotide phosphate (NADPH) oxidase were enhanced in the kidneys of the SAD rats. In conclusion, our work firstly provided direct evidence that oxidative stress played an important role in the renal dysfunction of SAD rats.

Improved purification of immunoglobulin G from plasma by mixed-mode chromatography.

Efficient loading of immunoglobulin G in mixed-mode chromatography is often a serious bottleneck in the chromatographic purification of immunoglobulin G. In this work, a mixed-mode ligand, 4-(1H-imidazol-1-yl) aniline, was coupled to Sepharose Fast Flow to fabricate AN SepFF adsorbents with ligand densities of 15-64 mmol/L, and the chromatographic performances of these adsorbents were thoroughly investigated to identify a feasible approach to improve immunoglobulin G purification. The results indicate that a critical ligand density exists for immunoglobulin G on the AN SepFF adsorbents. Above the critical ligand density, the adsorbents showed superior selectivity to immunoglobulin G at high salt concentrations, and also exhibited much higher dynamic binding capacities. For immunoglobulin G purification, both the yield and binding capacity increased with adsorbent ligand density along with a decrease in purity. It is difficult to improve the binding capacity, purity, and yield of immunoglobulin G simultaneously in AN SepFF chromatography. By using tandem AN SepFF chromatography, a threefold increase in binding capacity as well as high purity and yield of immunoglobulin G were achieved. Therefore, the tandem chromatography demonstrates that AN SepFF adsorbent is a practical and feasible alternative to MEP HyperCel adsorbents for immunoglobulin G purification.

Iron Active Center Coordination Reconstruction in Iron Carbide Modified on Porous Carbon for Superior Overall Water Splitting.

In this work, a novel liquid nitrogen quenching strategy is engineered to fulfill iron active center coordination reconstruction within iron carbide (Fe3C) modified on biomass-derived nitrogen-doped porous carbon (NC) for initiating rapid hydrogen and oxygen evolution, where the chrysanthemum tea (elm seeds, corn leaves, and shaddock peel, etc.) is treated as biomass carbon source within Fe3C and NC. Moreover, the original thermodynamic stability is changed through the corresponding force generated by liquid nitrogen quenching and the phase transformation is induced with rich carbon vacancies with the increasing instantaneous temperature drop amplitude. Noteworthy, the optimizing intermediate absorption/desorption is achieved by new phases, Fe coordination, and carbon vacancies. The Fe3C/NC-550 (550 refers to quenching temperature) demonstrates outstanding overpotential for hydrogen evolution reaction (26.3 mV at -10 mA cm-2) and oxygen evolution reaction (281.4 mV at 10 mA cm-2), favorable overall water splitting activity (1.57 V at 10 mA cm-2). Density functional theory (DFT) calculations further confirm that liquid nitrogen quenching treatment can enhance the intrinsic electrocatalytic activity efficiently by optimizing the adsorption free energy of reaction intermediates. Overall, the above results authenticate that liquid nitrogen quenching strategy open up new possibilities for obtaining highly active electrocatalysts for the new generation of green energy conversion systems.

Strain Engineering for Electrocatalytic Overall Water Splitting.

Strain engineering is a novel method that can achieve superior performance for different applications. The lattice strain can affect the performance of electrochemical catalysts by changing the binding energy between the surface-active sites and intermediates and can be affected by the thickness, surface defects and composition of the materials. In this review, we summarized the basic principle, characterization method, introduction strategy and application direction of lattice strain. The reactions on hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) are focused. Finally, the present challenges are summarized, and suggestions for the future development of lattice strain in electrocatalytic overall water splitting are put forward.

Preparation and characterization of slow-release urea fertilizer encapsulated by a blend of starch derivative and polyvinyl alcohol with desirable biodegradability and availability.

In this study, a novel double-layer slow-release fertilizer (SRF) was developed utilizing stearic acid (SA) as a hydrophobic inner coating and a blend of starch phosphate carbamate (abbreviated as SPC) and polyvinyl alcohol (PVA) as a hydrophilic outer coating (designated as SPCP). The mass ratios of SPC and PVA in the SPCP matrices were systematically optimized by comprehensively checking the water absorbency, water contact angle (WCA), water retention property (WR), and mechanical properties such as percentage elongation at break and tensile strength with FTIR, XRD, EDS, and XPS techniques, etc. Moreover, the optimal SPCP/5:5 demonstrated superior water absorbency with an 80.2 % increase for the total mass compared to natural starch/PVA(NSP), along with desirable water retention capacity in the soil, exhibiting a weight loss of only 48 % over 13 d. Relative to pure urea and SA/NSPU/5:5, SA/SPCPU/5:5 released 50.3 % of its nutrient within 15 h, leading to nearly complete release over 25 h in the aqueous phase, while only 46.6 % of urea was released within 20 d in soil, extending to approximately 30 d. The slow release performance of urea reveals that the diffusion rate of urea release shows a significant decrease with an increase in coating layers. Consequently, this work demonstrated a prospective technology for the exploration of environmentally friendly SRF by integrating biodegradable starch derivatives with other polymers.

Advancing overall water splitting via phase-engineered amorphous/crystalline interface: A novel strategy to accelerate proton-coupled electron transfer.

Traditional phase engineering enhances conductivity or activity by fully converting electrocatalytic materials into either a crystalline or an amorphous state, but this approach often faces limitations. Thus, a practical solution entails balancing the dynamic attributes of both phases to maximize an electrocatalyst's functionality is urgently needed. Herein, in this work, Co/Co2C crystals have been assembled on the amorphous N, S co-doped porous carbon (NSPC) through hydrothermal and calcination processes. The stable biphase structure and amorphous/crystalline (A/C) interface enhance conductivity and intrinsic activity. Moreover, the adsorption ability of water molecules and intermediates is improved significantly attributed to the rich oxygen-containing groups, unsaturated bonds, and defect sites of NSPC, which accelerates proton-coupled electron transfer (PCET) and overall water splitting. Consequently, A/C-Co/Co2C/NSPC (Co/Co2C/NSPC with amorphous/crystalline interface) exhibits outstanding behavior for oxygen evolution reaction (OER) and hydrogen evolution reaction (HER), requiring the overpotential of 240.0 mV and 70.0 mV to achieve 10 mA cm-2. Moreover, an electrolyzer assembled by A/C-Co/Co2C/NSPC-3 (anode) and A/C-Co/Co2C/NSPC-2 (cathode) demonstrates a low drive voltage of 1.54 V during overall water splitting process. Overall, this work has pioneered the coexistence of crystalline/amorphous phases in electrocatalysts and provided new insights into phase engineering.

Engineering hierarchical snowflake-like multi-metal selenide catalysts anchored on Ni foam for high-efficiency and stable overall water splitting.

The development of excellent bifunctional electrocatalysts is an effective way to promote the industrial application of electrolytic water. In this work, a free-standing W-doped cobalt selenide (W-CoSe300/NF) electrocatalyst with a snowflake-like structure supported on nickel foam was prepared by a hydrothermal-selenization strategy. Benefiting from the high specific surface area of the 3D snowflake-like structure and the regulation of tungsten doping on the electronic structure of the metal active center, W-CoSe300/NF shows remarkable electrocatalytic water decomposition performance. In 1.0 M KOH, the W-CoSe300/NF electrocatalyst achieved an efficient HER and OER at a current density of 50 mA cm-2 with overpotentials as low as 84 mV and 283 mV, respectively. More importantly, W-CoSe300/NF acts as both the anode and cathode of the electrolytic tank, requiring only a potential of 1.54 V to obtain 10 mA cm-2 and can operate continuously for more than 120 hours at this current density. This study proposes a new way for the design of high efficiency and affordable bifunctional electrocatalysts.

Cobalt nanoparticles intercalation coupled with tellurium-doping MXene for efficient electrocatalytic water splitting.

Nowadays, the inherent re-stacking nature and weak d-p hybridization orbital interactions within MXene remains significant challenges in the field of electrocatalytic water splitting, leading to unsatisfactory electrocatalytic activity and cycling stability. Herein, this work aims to address these challenges and improve electrocatalytic performance by utilizing cobalt nanoparticles intercalation coupled with enhanced π-donation effect. Specifically, cobalt nanoparticles are integrated into V2C MXene nanosheets to mitigate the re-stacking issue. Meanwhile, a notable charge redistribution from cobalt to vanadium elevates orbital levels, reduces π*-antibonding orbital occupancy and alleviates Jahn-Teller distortion. Doping with tellurium induces localized electric field rearrangement resulting from the changes in electron cloud density. As a result, Co-V2C MXene-Te acquires desirable activity for hydrogen evolution reaction and oxygen evolution reaction with the overpotential of 80.8 mV and 287.7 mV, respectively, at the current density of -10 mA cm-2 and 10 mA cm-2. The overall water splitting device achieves an impressive low cell voltage requirement of 1.51 V to obtain 10 mA cm-2. Overall, this work could offer a promising solution when facing the re-stacking issue and weak d-p hybridization orbital interactions of MXene, furnishing a high-performance electrocatalyst with favorable electrocatalytic activity and cycling stability.

Development and validation of a highly sensitive LC-MS/MS method for quantitation of bivalirudin in human plasma: application to a human pharmacokinetic study.

A sensitive, specific and simple LC-MS/MS method was developed for the identification and quantification of bivalirudin in human plasma using diazepam as an internal standard (IS). The API-4000 LC-MS/MS was operated under multiple-reaction monitoring mode using electrospray ionization. The sample preparation consisted of an easy protein precipitation sample pretreatment with methanol. Chromatographic separation was achieved on a Zorbax Eclipse plus C18 100 × 2.1 mm column with a mobile phase of water-methanol-0.1% formic acid. The analytes were detected with a triple quadrupole Quantum Access with positive ionization. Ions monitored in the multiple-reaction monitoring mode were m/z 1091 → 650 for bivalirudin (at 2.70 min) and m/z 285 → 193 for diazepam (at 3.85 min). The developed method was validated in human plasma with a lower limit of quantitation of 20 µg/L for bivalirudin. A linear response function was established for the range of concentrations 20-10,000 µg/L (r > 0.998) for bivalirudin. The intra- and inter-day precision values for bivalirudin met the acceptance criteria as per US Food and Drug Administration guidelines. Bivalirudin was stable in the battery of stability studies, viz. bench-top, freeze-thaw cycles and long-term stability. The developed assay method was applied to an intravenous administration study in humans.

The relationship between obesity associated weight-adjusted waist index and the prevalence of hypertension in US adults aged ≥60 years: a brief report.

Objectives: The main objective was to examine the relationship between weight-adjusted waist index (WWI) and the prevalence of hypertension among individuals aged ≥60 years who participated in the NHANES between 2011 and 2018 years. Methods: The data for this study were obtained from the National Health and Nutrition Examination Survey (NHANES) 2011-2018. In this population-based study, we focused on participants who were over 60 years old. Data were collected from the aforementioned survey, and the variable of interest was WWI, which was calculated as waist (cm) divided by the square root of body weight (kg). Multivariable logistic regression model was applied to calculate adjusted ORs with 95% CIs in order to explore any possible correlation between WWI and the prevalence of hypertension. Subgroup analysis were used to verify the stability of the relationship between WWI and the prevalence of hypertension. The interaction tests were also conducted in this research. Results: Results revealed that adults aged ≥60 years who were in the highest WWI quartile had significantly higher chances of developing hypertension when compared to those in the lowest quartile, after adjusting for covariates and potential confounders (p < 0.001). Conclusion: These findings suggest that there is a strong correlation between elevated levels of WWI and the risk of developing hypertension among older adults. As such, WWI could serve as a unique and valuable biomarker for identifying hypertension risk at an earlier stage in the older adults population.

Novel Strain Engineering Combined with a Microscopic Pore Synergistic Modulated Strategy for Designing Lattice Tensile-Strained Porous V2C-MXene for High-Performance Overall Water Splitting.

Transition metal carbon/nitride (MXene) holds immense potential as an innovative electrocatalyst for enhancing the overall water splitting properties. Nevertheless, the re-stacking nature induced by van der Waals force remains a significant challenge. In this work, the lattice tensile-strained porous V2C-MXene (named as TS(24)-P(50)-V2C) is successfully constructed via the rapid spray freezing method and the following hydrothermal treatment. Besides, the influence of lattice strain degree and microscopic pores on the catalytic ability is reviewed and explored systematically. The lattice tensile strain within V2C-MXene could widen the interlayer spacing and accelerate the ion transfer. The microscopic pores could change the ion transmission path and shorten the migration distance. As a consequence, the obtained TS(24)-P(50)-V2C shows extraordinary hydrogen evolution reaction and oxygen evolution reaction activity with the overpotential of 154 and 269 mV, respectively, at the current density of 10 mA/cm2, which is quite remarkable compared to the MXene-based electrocatalysts. Moreover, the overall water splitting device assembled using TS(24)-P(50)-V2C as both anode and cathode demonstrates a low cell voltage requirement of 1.57 V to obtain 10 mA/cm2. Overall, the implementation of this work could offer an exciting avenue to overcome the re-stacking issue of V2C-MXene, affording a high-efficiency electrocatalyst with superior catalytic activity and desirable reaction kinetics.

Liquid nitrogen quenching inducing lattice tensile strain to endow nitrogen/fluorine co-doping Fe3O4 nanocubes assembled on porous carbon with optimizing hydrogen evolution reaction.

In this work, the lattice tensile strain of nitrogen/fluorine co-doping ferroferric oxide (Fe3O4) nanocubes assembled on chrysanthemum tea-derived porous carbon is induced through a novel liquid nitrogen quenching treatment (named as TS-NF-FO/PCX-Y, TS: Tensile strain, NF: Nitrogen/Fluorine co-doping, FO: Fe3O4, PC: Porous carbon, X: The weight ratio of KOH/carbon, Y: The adding amount of porous carbon). Besides, the electrocatalytic activity influenced by the adding amount of porous carbon, the type of dopant, and the introduction of lattice tensile strain is systematically studied and explored. The interconnected porous carbon could improve electrical conductivity and prevent Fe3O4 nanocubes from aggregating. The induced nitrogen/fluorine could cause extrinsic defects and tailor the intrinsic electron state of the host materials. Lattice tensile strain could tailor the surface electronic structure of Fe3O4 via changing the dispersion of surface atoms and their bond lengths. Impressively, the designed TS-NF-FO/PC5-0.25 delivers a low overpotential of 207.3 ± 0.4 mV at 10 mA/cm2 and demonstrates desirable reaction dynamics. Density functional theory calculations illustrate that the electron structure and hydrogen adsorption free energy (ΔG*H) are optimized by the synergistic effect among porous carbon, nitrogen/fluorine co-doping and lattice tensile strain, thus promoting hydrogen evolution reaction (HER) catalytic activity. Overall, this work paves the way to unravel the enhancement mechanism of HER on transition metal oxide-based materials by electronic structure and phase composition modulation strategy.

Colistin resistance of Acinetobacter baumannii: clinical reports, mechanisms and antimicrobial strategies.

Colistin is the last resort for treatment of multidrug-resistant Acinetobacter baumannii. Unfortunately, resistance to colistin has been reported all over the world. The highest resistance rate was reported in Asia, followed by Europe. The heteroresistance rate of A. baumannii to colistin is generally higher than the resistance rate. The mechanism of resistance might be loss of lipopolysaccharide or/and the PmrAB two-component system. Pharmacokinetic/pharmacodynamic studies revealed that colistin monotherapy is unable to prevent resistance, and combination therapy might be the best antimicrobial strategy against colistin-resistant A. baumannii. Colistin/rifampicin and colistin/carbapenem are the most studied combinations that showed promising results in vitro, in vivo and in the clinic. New peptides showing good activity against colistin-resistant A. baumannii are also being investigated.