Synaptic dysfunction in hippocampus of transgenic mouse models of Alzheimer's disease: a multi-electrode array study.

APP.V717I and Tau.P301L transgenic mice develop Alzheimer's disease pathology comprising important aspects of human disease including increased levels of amyloid peptides, cognitive and motor impairment, amyloid plaques and neurofibrillary tangles. The combined model, APP.V717I×Tau.P301L bigenic mice (biAT mice) exhibit aggravated amyloid and tau pathology with severe cognitive and behavioral defects. In the present study, we investigated early changes in synaptic function in the CA1 and CA3 regions of acute hippocampal slices of young APP.V717I, Tau.P301L and biAT transgenic animals. We have used planar multi-electrode arrays (MEA) and improved methods for simultaneous multi-site recordings from two hippocampal sub-regions. In the CA1 region, long-term potentiation (LTP) was severely impaired in all transgenic animals when compared with age-matched wild-type controls, while basal synaptic transmission and paired-pulse facilitation were minimally affected. In the CA3 region, LTP was normal in Tau.P301L and APP.V717I but clearly impaired in biAT mice. Surprisingly, frequency facilitation in CA3 was significantly enhanced in Tau.P301L mice, while not affected in APP.V717I mice and depressed in biAT mice. The findings demonstrate important synaptic changes that differ considerably in the hippocampal sub-regions already at young age, well before the typical amyloid or tau pathology is evident.

Coulometric detection of irreversible electrochemical reactions occurring at Pt microelectrodes used for neural stimulation.

The electrochemistry of 50 µm diameter Pt electrodes used for neural stimulation was studied in vitro by reciprocal derivative chronopotentiometry. This differential method provides well-defined electrochemical signatures of the various polarization phenomena that occur at Pt microelectrodes and are generally obscured in voltage transients. In combination with a novel in situ coulometric approach, irreversible H(2) and O(2) evolution, Pt dissolution and reduction of dissolved O(2) were detected. Measurements were performed with biphasic, charge-balanced, cathodic-first and anodic-first current pulses at charge densities ranging from 0.07 to 1.41 mC/cm(2) (real surface area) in phosphate buffered saline (PBS) with and without bovine serum albumin (BSA). The extent to which O(2) reduction occurs under the different stimulation conditions was compared in O(2)-saturated and deoxygenated PBS. Adsorption of BSA inhibited Pt dissolution as well as Pt oxidation and oxide reduction by blocking reactive sites on the electrode surface. This inhibitory effect promoted the onset of irreversible H(2) and O(2) evolution, which occurred at lower charge densities than those in PBS. Reduction of dissolved O(2) on Pt electrodes accounted for 19-34% of the total injected charge in O(2)-saturated PBS, while a contribution of 0.4-12% was estimated for in vivo stimulation. These result may prove important for the interpretation of histological damage induced by neural stimulation and therefore help define safer operational limits.

Design and Construction of a Whole Cell Bacterial 4-Hydroxyphenylacetic Acid and 2-Phenylacetic Acid Bioassay.

INTRODUCTION: Auxins are hormones that regulate plant growth and development. To accurately quantify the low levels of auxins present in plant and soil samples, sensitive detection methods are needed. In this study, the design and construction of two different whole cell auxin bioassays is illustrated. Both use the auxin responsive element HpaA as an input module but differ in output module. The first bioassay incorporates the gfp gene to produce a fluorescent bioassay. Whereas the second one utilizes the genes phzM and phzS to produce a pyocyanin producing bioassay whose product can be measured electrochemically. RESULTS: The fluorescent bioassay is able to detect 4-hydroxyphenylacetic acid (4-HPA) and 2-phenylacetic acid (PAA) concentrations from 60 µM to 3 mM in a dose-responsive manner. The pyocyanin producing bioassay can detect 4-HPA concentrations from 1.9 to 15.625 µM and PAA concentrations from 15.625 to 125 µM, both in a dose-responsive manner. CONCLUSION: A fluorescent whole cell auxin bioassay and an electrochemical whole cell auxin bioassay were constructed and tested. Both are able to detect 4-HPA and PAA at concentrations that are environmentally relevant to plant growth.

Mixed-signal template-based reduction scheme for stimulus artifact removal in electrical stimulation.

Simultaneous electrical stimulation and recording are used to gain insights into the function of neuronal circuitry. However, artifacts produced by the electrical stimulation pulses prevent the recording of neural responses during, and a short period after, the stimulation duration. In this work, we describe a mixed-signal recording topology with template subtraction for removing the artifact during the stimulation pulse. Emulated artifacts generated from a lumped electrical circuit model and experimental artifacts in cardiac cell cultures are used to evaluate the topology. The simulations show that delays between the emulated artifact and its estimated compensation template represent the largest error source of the analog template subtraction. The quantization error appears like random noise and determines the threshold level for the action potential detection. Simulations show that removal of the artifacts is possible, allowing the detection of action potentials during the stimulation pulsing period, even for high-amplitude saturating artifacts. Measurement results with artifacts elicited in cardiac cell cultures show feasible applications of this topology. The proposed topology therefore promisingly opens up a previously unavailable detection window for improving the analysis of the neuronal activity.

Endothelial cell responses to micropillar substrates of varying dimensions and stiffness.

In the vascular niche, the extracellular matrix (ECM) provides a structural scaffold with a rich ligand landscape of essential matrix proteins that supports the organization and stabilization of endothelial cells (ECs) into functional blood vessels. Many of the physical interactions between ECs and macromolecular components of the ECM occur at both the micron and submicron scale. In addition, the elasticity of the ECM has been shown to be a critical factor in the progress of the angiogenic cascade. Here, we sought to determine the effect of substrate topography and elasticity (stiffness) on EC behavior. Utilizing a unique SiO(2) substrate with an array of micropillars, we first demonstrate that micropillars with heights >3 µm significantly decrease EC adhesion and spreading. Fibronectin (Fn) patterning of 1 µm high micropillars enabled EC adhesion onto the micropillars and promoted alignment in a single-cell chain manner. We then developed a robust method to generate a soft micropillar substrate array made of polydimethylsiloxane (PDMS), similar to the SiO(2) substrate. Finally, we examined the kinetics of EC adhesion and spreading on the soft PDMS substrates compared to the stiff SiO(2) substrates. Culturing cells on the PDMS substrates demonstrated an enhanced EC elongation and alignment when compared to stiff SiO(2) with similar topographical features. We conclude that the elongation and alignment of ECs is coregulated by substrate topography and stiffness and can be harnessed to guide vascular organization.

Fabrication and successful in-vivo implantation of a flexible neural implant with a hybrid polyimide-silicon design.

A flexible neural implant was designed and fabricated using an novel integration approach that offers the advantages of both silicon and polymer based implants: high density electrodes and precise insertion on one side and mechanical flexibility suitable for reduced tissue strain due to micro-motion during chronic implantation on the other side. This was achieved by separating the device into silicon or polymer areas, depending on their desired functionality. The tip, where the recording and stimulation electrodes would be placed, was kept of silicon: a choice that doesn't call for any compromise to be made regarding the high density electrode and possible local circuit integration later on. The bevel shaped sharp silicon tip also proved to facilitate the probe insertion, offering a behavior very much similar to the classical rigid silicon probes. On the other side, most of the 1 cm long shank of the probe was made out of polyimide. This led to more than one order of magnitude reduction of the forces necessary to bend the shank. The flexible shank proved also to be more robust than silicon probes, sustaining significant deformation in any direction without fracture. The 9mm deep in-vivo implantation were successfully achieved without buckling for 10 µm/s and 100 µm/s insertion speeds.

Towards a noise prediction model for in vivo neural recording.

The signal-to-noise ratio of in vivo extracellular neural recordings with microelectrodes is influenced by many factors including the impedance of the electrode-tissue interface, the noise of the recording equipment and biological background noise from distant neurons. In this work we study the different noise sources affecting the quality of neural signals. We propose a simplified noise model as an analytical tool to predict the noise of an electrode given its geometrical dimensions and impedance characteristics. With this tool we are able to quantify different noise sources, which is important to determine realistic noise specifications for the design of electronic neural recording interfaces.

A multichannel integrated circuit for electrical recording of neural activity, with independent channel programmability.

Since a few decades, micro-fabricated neural probes are being used, together with microelectronic interfaces, to get more insight in the activity of neuronal networks. The need for higher temporal and spatial recording resolutions imposes new challenges on the design of integrated neural interfaces with respect to power consumption, data handling and versatility. In this paper, we present an integrated acquisition system for in vitro and in vivo recording of neural activity. The ASIC consists of 16 low-noise, fully-differential input channels with independent programmability of its amplification (from 100 to 6000 V/V) and filtering (1-6000 Hz range) capabilities. Each channel is AC-coupled and implements a fourth-order band-pass filter in order to steeply attenuate out-of-band noise and DC input offsets. The system achieves an input-referred noise density of 37 nV/√Hz, a NEF of 5.1, a CMRR > 60 dB, a THD < 1% and a sampling rate of 30 kS/s per channel, while consuming a maximum of 70 µA per channel from a single 3.3 V. The ASIC was implemented in a 0.35 µm CMOS technology and has a total area of 5.6 × 4.5 mm². The recording system was successfully validated in in vitro and in vivo experiments, achieving simultaneous multichannel recordings of cell activity with satisfactory signal-to-noise ratios.

Open-cell recording of action potentials using active electrode arrays.

The investigation of complex communication in cellular networks requires superior measurement tools than those available to date. Electrode arrays integrated onto silicon electronics are increasingly used to measure the electrical activity of cells in an automated and highly parallelized fashion, but they are restricted to recording extracellular potentials. Here, we report on an array of TiN electrodes built using standard silicon electronics for intracellular action potential recording. Intracellular access, possible at each of the 16 384 electrodes on the chip, was accomplished by local membrane electroporation using electrical stimulation with subcellular, micrometer-sized electrodes. Access to the cell interior was transient and could be tuned in duration by adapting the electroporation protocol. Intracellular sensing was found to be minimally invasive in the short and long-term, allowing consecutive intracellular recordings from the same cell over the course of days. Finally, we applied this method to investigate the effect of an ion channel blocker on cardiac electrical activity. This technique opens the door to massively parallel, long-term intracellular recording for fundamental electrophysiology and drug screening.

Bottom-up SiO2 embedded carbon nanotube electrodes with superior performance for integration in implantable neural microsystems.

The reliable integration of carbon nanotube (CNT) electrodes in future neural probes requires a proper embedding of the CNTs to prevent damage and toxic contamination during fabrication and also to preserve their mechanical integrity during implantation. Here we describe a novel bottom-up embedding approach where the CNT microelectrodes are encased in SiO(2) and Parylene C with lithographically defined electrode openings. Vertically aligned CNTs are grown on microelectrode arrays using low-temperature plasma-enhanced chemical vapor deposition compatible with wafer-scale CMOS processing. Electrodes with 5, 10, and 25 µm diameter are realized. The CNT electrodes are characterized by electrochemical impedance spectroscopy and cyclic voltammetry and compared against cofabricated Pt and TiN electrodes. The superior performance of the CNTs in terms of impedance (≤4.8 ± 0.3 kΩ at 1 kHz) and charge-storage capacity (≥513.9 ± 61.6 mC/cm(2)) is attributed to an increased wettability caused by the removal of the SiO(2) embedding in buffered hydrofluoric acid. Infrared spectroscopy reveals an unaltered chemical fingerprint of the CNTs after fabrication. Impedance monitoring during biphasic current pulsing with increasing amplitudes provides clear evidence of the onset of gas evolution at CNT electrodes. Stimulation is accordingly considered safe for charge densities ≤40.7 mC/cm(2). In addition, prolonged stimulation with 5000 biphasic current pulses at 8.1, 40.7, and 81.5 mC/cm(2) increases the CNT electrode impedance at 1 kHz only by 5.5, 1.2, and 12.1%, respectively. Finally, insertion of CNT electrodes with and without embedding into rat brains demonstrates that embedded CNTs are mechanically more stable than non-embedded CNTs.

Single-cell recording and stimulation with a 16k micro-nail electrode array integrated on a 0.18 µm CMOS chip.

To cope with the growing needs in research towards the understanding of cellular function and network dynamics, advanced micro-electrode arrays (MEAs) based on integrated complementary metal oxide semiconductor (CMOS) circuits have been increasingly reported. Although such arrays contain a large number of sensors for recording and/or stimulation, the size of the electrodes on these chips are often larger than a typical mammalian cell. Therefore, true single-cell recording and stimulation remains challenging. Single-cell resolution can be obtained by decreasing the size of the electrodes, which inherently increases the characteristic impedance and noise. Here, we present an array of 16,384 active sensors monolithically integrated on chip, realized in 0.18 µm CMOS technology for recording and stimulation of individual cells. Successful recording of electrical activity of cardiac cells with the chip, validated with intracellular whole-cell patch clamp recordings are presented, illustrating single-cell readout capability. Further, by applying a single-electrode stimulation protocol, we could pace individual cardiac cells, demonstrating single-cell addressability. This novel electrode array could help pave the way towards solving complex interactions of mammalian cellular networks.

Closing the loop for Deep Brain Stimulation implants enables personalized healthcare for Parkinson's disease patients.

DEEP brain stimulation implants have improved life quality for more than 70,000 patients world-wide with diseases like Parkinson's, essential tremor, or obsessive-compulsive disorder where pharmaceutical therapies alone could not offer sufficient relief. Still, optimization and monitoring relies heavily on regular clinical visits, putting a burden on patient's comfort and clinicians. Permanent monitoring and combination with other patient health signals could ultimately lead to a personalized closed-loop therapy with remote quality monitoring. This requires technological improvements on the DBS implants such as integration of recording capabilities for brain activity monitoring, active low-power electronics, rechargeable battery technology, and body sensor networks for integration with e.g. gait, speech, and other vital information sensors on the patient's body and a link to a telemedicine platform using mobile technologies.

Chronic behavior evaluation of a micro-machined neural implant with optimized design based on an experimentally derived model.

Understanding the mechanical interactions between implants and the surrounding tissue is known to have an important role for improving the bio-compatibility of such devices. Using a recently developed model, a particular micro-machined neural implant design aiming the reduction of insertion forces dependence on the insertion speed was optimized. Implantations with 10 and 100 µm/s insertion speeds showed excellent agreement with the predicted behavior. Lesion size, gliosis (GFAP), inflammation (ED1) and neuronal cells density (NeuN) was evaluated after 6 week of chronic implantation showing no insertion speed dependence.

Micro-sized syringes for single-cell fluidic access integrated on a micro-electrode array CMOS chip.

Very-large scale integration and micro-machining have enabled the development of novel platforms for advanced and automated examination of cells and tissues in vitro. In this paper, we present a CMOS chip designed in a commercial 0.18 µm technology with integrated micro-syringes combined with micro-nail shaped electrodes and readout electronics. The micro-syringes could be individually addressed by a through-wafer micro-fluidic channel with an inner diameter of 1 µm. We demonstrated the functionality of the micro-fluidic access by diffusion of fluorescent species through the channels. Further, hippocampal neurons were cultured on top of an array of micro-syringes, and focused ion beam-scanning electron microscopy cross-sections revealed protrusion of the cells inside the channels, creating a strong interface between the membrane and the chip surface. This principle demonstrates a first step towards a novel type of automated in vitro platforms, allowing local delivery of substances to cells or advanced planar patch clamping.

Localized electrical stimulation of in vitro neurons using an array of sub-cellular sized electrodes.

The investigation of single-neuron parameters is of great interest because many aspects in the behavior and communication of neuronal networks still remain unidentified. However, the present available techniques for single-cell measurements are slow and do not allow for a high-throughput approach. We present here a CMOS compatible microelectrode array with 84 electrodes (with diameters ranging from 1.2 to 4.2 µm) that are smaller than the size of cell, thereby supporting single-cell addressability. We show controllable electroporation of a single cell by an underlying electrode while monitoring changes in the intracellular membrane potential. Further, by applying a localized electrical field between two electrodes close to a neuron while recording changes in the intracellular calcium concentration, we demonstrate activation of a single cell (∼270%, DF/F(0)), followed by a network response of the neighboring cells. The technology can be easily scaled up to larger electrode arrays (theoretically up to 137,000 electrodes/mm(2)) with active CMOS electronics integration able to perform high-throughput measurements on single cells.

Single-cell stimulation and electroporation using a novel 0.18 µ CMOS chip with subcellular-sized electrodes.

In drug screening and pharmaceutical research, high-throughput systems that are able to perform single-cell measurements are highly desired. Micro-electrode arrays try to answer this need but still suffer from significant drawbacks such as a small amount of electrodes and the inability to address single cells. Here, we present a novel multi-transistor array chip with 16,384 subcellular-sized electrodes based on 0.18 µm CMOS technology. We show that single-cell stimulation is possible by applying voltage pulses on the electrode to stimulate the cells lying on top. Electroporation of the cell membrane is observed using the whole-cell patch clamp technique and fluorescent dye-based live imaging. This technology could be used for high-throughput, single-cell manipulations for the purpose of large-scale drug screening and the investigation of fundamental cell processes.

Using reciprocal derivative chronopotentiometry as a technique to determine safe charge injection limits of electrodes used for neural stimulation.

We used reciprocal derivative chronopotentiometry (RDC) with platinum electrodes of 50 microm diameter in 0.15 M phosphate buffered saline solution to identify the various electrochemical processes occurring at the electrode during biphasic current pulsing. RDC allowed to determine the limits of water hydrolysis based on the specific (dt/dE)-E data representation employed in this technique resulting in curves similar to the voltammetric i-E response. Current stimulation was performed by either varying the pulse amplitude or pulse width. We found that the limits for H(2) and O(2) evolution for constant-amplitude pulses lied at 0.51 mC/cm(2) and 0.67 mC/cm(2), respectively, while for constant-width pulses they occurred at slightly lower values of 0.49 mC/cm(2) and 0.61 mC/cm(2), respectively. We could also extract values for the anodic and cathodic overvoltages associated with gas evolution. The cathodic overvoltage for H(2) evolution was 1.43 V for both constant-amplitude and constant-width pulses, while the anodic overpotentials for O(2) evolution were 2.45 V in the first and 2.24 V in the latter case. These values are clearly larger than the gas evolution limits generally found with steady-state voltammetry.

A novel 16k micro-nail CMOS-chip for in-vitro single-cell recording, stimulation and impedance measurements.

In neurophysiological and pharmaceutical research, parallel and individual access to a dense population of in-vitro cultured neurons is a key feature for analyzing networks of neurons. This paper presents a 0.18µm CMOS chip containing a dense array of micro-nail electrodes, a 128×128 sensor/actuator matrix with in-situ differential amplification circuits, pico-Ampere current stimulation, and impedance measurement circuits. Measurements on packaged chips show successful impedance measurements matching the simulation model and electrical recordings of in-vitro cultured cardiomyocytes, correlated with recorded changes in intra-cellular calcium concentrations. This system is a first step towards a high-throughput neuron/chip interface.

Towards a closed-loop system for stimulation and recording: an in vitro approach with embryonic cardiomyocytes.

Closed loop systems, in which stimulation parameters are adjusted according to recorded signals would reduce the occurrence of side effects of stimulation and broaden current therapeutic options. As a step towards a closed-loop clinical system, we developed a single electrode stimulation / recording system for an in vitro microelectrode array. The system was used in vitro to simultaneously stimulate and record cardiac cells. Results indicated that stimulation artifacts depend on the distance between recording electrode and stimulating electrode and on the voltage amplitude. No artifact reduction algorithm was required for detecting cardiac action potentials 2ms after stimulation if the stimulation pulses were less than or equal to ± 1.5 V, and the distance from stimulation site was more than 200 µm. Cardiac signal propagation was also investigated with this system.