Long-range order enabled stability in quantum dot light-emitting diodes.

Light-emitting diodes (LEDs) based on perovskite quantum dots (QDs) have produced external quantum efficiencies (EQEs) of more than 25% with narrowband emission1,2, but these LEDs have limited operating lifetimes. We posit that poor long-range ordering in perovskite QD films-variations in dot size, surface ligand density and dot-to-dot stacking-inhibits carrier injection, resulting in inferior operating stability because of the large bias required to produce emission in these LEDs. Here we report a chemical treatment to improve the long-range order of perovskite QD films: the diffraction intensity from the repeating QD units increases three-fold compared with that of controls. We achieve this using a synergistic dual-ligand approach: an iodide-rich agent (aniline hydroiodide) for anion exchange and a chemically reactive agent (bromotrimethylsilane) that produces a strong acid that in situ dissolves smaller QDs to regulate size and more effectively removes less conductive ligands to enable compact, uniform and defect-free films. These films exhibit high conductivity (4 × 10-4 S m-1), which is 2.5-fold higher than that of the control, and represents the highest conductivity recorded so far among perovskite QDs. The high conductivity ensures efficient charge transportation, enabling red perovskite QD-LEDs that generate a luminance of 1,000 cd m-2 at a record-low voltage of 2.8 V. The EQE at this luminance is more than 20%. Furthermore, the stability of the operating device is 100 times better than previous red perovskite LEDs at EQEs of more than 20%.

Distribution control enables efficient reduced-dimensional perovskite LEDs.

Light-emitting diodes (LEDs) based on perovskite quantum dots have shown external quantum efficiencies (EQEs) of over 23% and narrowband emission, but suffer from limited operating stability1. Reduced-dimensional perovskites (RDPs) consisting of quantum wells (QWs) separated by organic intercalating cations show high exciton binding energies and have the potential to increase the stability and the photoluminescence quantum yield2,3. However, until now, RDP-based LEDs have exhibited lower EQEs and inferior colour purities4-6. We posit that the presence of variably confined QWs may contribute to non-radiative recombination losses and broadened emission. Here we report bright RDPs with a more monodispersed QW thickness distribution, achieved through the use of a bifunctional molecular additive that simultaneously controls the RDP polydispersity while passivating the perovskite QW surfaces. We synthesize a fluorinated triphenylphosphine oxide additive that hydrogen bonds with the organic cations, controlling their diffusion during RDP film deposition and suppressing the formation of low-thickness QWs. The phosphine oxide moiety passivates the perovskite grain boundaries via coordination bonding with unsaturated sites, which suppresses defect formation. This results in compact, smooth and uniform RDP thin films with narrowband emission and high photoluminescence quantum yield. This enables LEDs with an EQE of 25.6% with an average of 22.1 ±1.2% over 40 devices, and an operating half-life of two hours at an initial luminance of 7,200 candela per metre squared, indicating tenfold-enhanced operating stability relative to the best-known perovskite LEDs with an EQE exceeding 20%1,4-6.

Polarity-Mediated Antisolvent Control Enables Efficient Lanthanide-Based near-Infrared Perovskite LEDs.

Alloying lanthanide ions (Yb3+) into perovskite quantum dots (Yb3+:CsPb(Cl1-xBrx)3) is an effective method to achieve efficient near-infrared (NIR) luminescence (>950 nm). Increasing the Yb3+ alloying ratio in the perovskite matrix enhances the luminescence intensity of Yb3+ emission at 990 nm. However, high Yb3+ alloying (>15%) results in vacancy-induced inferior material stability. In this work, we developed a polarity-mediated antisolvent manipulation strategy to resolve the incompatibility between a high Yb3+ alloying ratio and inferior stability of Yb3+:CsPb(Cl1-xBrx)3. Precise control of solution polarity enables increased uniformity of the perovskite matrix with fewer trap densities. Employing this strategy, we obtain Yb3+:CsPb(Cl1-xBrx)3 with the highest Yb3+ alloying ratio of 30.2% and a 2-fold higher electroluminescence intensity at 990 nm. We lever the engineered Yb3+:CsPb(Cl1-xBrx)3 to fabricate NIR-LEDs, achieving a peak external quantum efficiency (EQE) of 8.5% at 990 nm: this represents the highest among perovskite NIR-LEDs with an emission wavelength above 950 nm.

Nickel Oxide Hole Injection Layers for Balanced Charge Injection in Quantum Dot Light-Emitting Diodes.

Quantum dot (QD) light-emitting diodes (QLEDs) are promising for next-generation displays, but suffer from carrier imbalance arising from lower hole injection compared to electron injection. A defect engineering strategy is reported to tackle transport limitations in nickel oxide-based inorganic hole-injection layers (HILs) and find that hole injection is able to enhance in high-performance InP QLEDs using the newly designed material. Through optoelectronic simulations, how the electronic properties of NiOx affect hole injection efficiency into an InP QD layer, finding that efficient hole injection depends on lowering the hole injection barrier and enhancing the acceptor density of NiOx is explored. Li doping and oxygen enriching are identified as effective strategies to control intrinsic and extrinsic defects in NiOx, thereby increasing acceptor density, as evidenced by density functional theory calculations and experimental validation. With fine-tuned inorganic HIL, InP QLEDs exhibit a luminance of 45 200 cd m-2 and an external quantum efficiency of 19.9%, surpassing previous inorganic HIL-based QLEDs. This study provides a path to designing inorganic materials for more efficient and sustainable lighting and display technologies.

Visible-Light-Promoted Aerobic α-Thiocyanation of Carbonyl Compounds with Ammonium Thiocyanate.

In the present study, we successfully developed an efficient thiocyanation of carbonyl compounds by using low-toxicity and inexpensive ammonium thiocyanate as the thiocyanate source under visible light in air (O2) at room temperature. This unified strategy is very facile for thiocyanation of various carbonyl compound derivatives (ß-keto esters, ß-keto amides, pyrazo-5-ones, isoxazol-5-ones, etc.). More importantly, the reaction proceeded smoothly without the addition of a photocatalyst and strong oxidant, ultimately minimizing the production of chemical waste. Furthermore, this green and sustainable synthetic chemistry can be used in the late-stage functionalization (LSF) of biorelevant compounds, which offers unique opportunities to achieve smooth and clean thiocyanation of drugs under mild reaction conditions.

Enantioselective α-Trifluoromethylthiolation of Carbonyl Compounds with AgSCF3 and Trichloroisocyanuric Acid.

We successfully developed an enantioselective trifluoromethylthiolation of structurally diverse carbonyl compounds. Trichloroisocyanuric acid and AgSCF3 were employed to generate active electrophilic trifluoromethylthio species in situ for asymmetric C-SCF3 bond formation. A broad variety of chiral SCF3-carbon nucleophiles (pyrazolones, ß-keto esters, and ß-keto amides) were obtained in excellent yields with high enantioselectivities (up to 92% ee) by Cinchona alkaloid derived squaramide catalysts. The reaction exhibits high efficiency, good enantioselectivity, and high functional group tolerance, which provided a novel and efficient way for asymmetric synthesis of trifluoromethylthiolated carbonyl compounds.

Construction of an Angular Tricyclic Benzofuran Skeleton Using the C-H Activation Strategy.

A protocol for the construction of an angular tricyclic benzofuran skeleton based on the C-H activation strategy has been established. Different phthalide lactones on this skeleton can be easily assembled with various side chains by using C-H activation with aldehydes and subsequent reduction. This skeleton provides a versatile and crucial motif for the total synthesis of naturally occurring angular tricyclic benzofurans and their derivatives. Based on this protocol, the improved total syntheses of daldinin A and annullatin D were achieved in yields of 17.3 and 7.6%, respectively.

Respiratory syncytial virus subtypes in children with bronchiolitis: does it correlate with clinical severity?

BACKGROUND: In this retrospective study, we aimed to evaluate the factors associated with the severity of respiratory syncytial virus (RSV) bronchiolitis in children aged under 2 years who were admitted to the Children's Hospital of Hebei between June 2018 and January 2019. METHODS: Sputum samples positive for RSV via multiplex PCR were subtyped using real-time PCR. Data collected included risk factors for disease severity, demographics, microbiology, and outcomes. RESULTS: Of the 82 children with RSV bronchiolitis, 79 were treated and discharged with improvement, while 3 died. All three patients had underlying medical conditions, including complex congenital heart disease and severe combined immunodeficiency. Further, disease severity was associated with preexisting underlying disease, fever duration, and bacterial co-infection, but not with the RSV subtype. CONCLUSIONS: Our findings suggest that an appropriate therapeutic regimen should include the detection of bacterial co-infections and the identification of underlying diseases for the effective management of severe RSV bronchiolitis.

The complete chloroplast genome of Ulmus mianzhuensis with insights into structural variations, adaptive evolution, and phylogenetic relationships of Ulmus (Ulmaceae).

BACKGROUND: Ulmus mianzhuensis is an endemic tree species in China with high ornamental and economic value. Currently, little is known regarding its genomic architecture, phylogenetic position, or adaptive evolution. Here, we sequenced the complete chloroplast genome (cp genome) of U. mianzhuensis and further compared the variations in gene organization and structure within Ulmus species to define their genomic evolution, then reconstructed the phylogenomic relationship of 31 related Ulmus species to explore the systematic position of U. mianzhuensis and the utility of cp genome for resolving phylogenetics among Ulmus species. RESULTS: Our results revealed that all the Ulmus species exhibited a typical quadripartite structure, with a large single copy (LSC) region of 87,170 - 88,408 bp, a small single copy (SSC) region of 18,650 - 19,038 bp and an inverted repeat (IR) region of 26,288 - 26,546 bp. Within Ulmus species, gene structure and content of cp genomes were highly conserved, although slight variations were found in the boundary of SC/IR regions. Moreover, genome-wide sliding window analysis uncovered the variability of ndhC-trnV-UAC, ndhF-rpl32, and psbI-trnS-GCU were higher among 31 Ulmus that may be useful for the population genetics and potential DNA barcodes. Two genes (rps15 and atpF) were further detected under a positive selection of Ulmus species. Comparative phylogenetic analysis based on the cp genome and protein-coding genes revealed consistent topology that U. mianzhuensis is a sister group to U. parvifolia (sect. Microptelea) with a relatively low-level nucleotide variation of the cp genome. Additionally, our analyses also found that the traditional taxonomic system of five sections in Ulmus is not supported by the current phylogenomic topology with a nested evolutionary relationship between sections. CONCLUSIONS: Features of the cp genome length, GC content, organization, and gene order were highly conserved within Ulmus. Furthermore, molecular evidence from the low variation of the cp genome suggested that U. mianzhuensis should be merged into U. parvifolia and regarded as a subspecies of U. parvifolia. Overall, we demonstrated that the cp genome provides valuable information for understanding the genetic variation and phylogenetic relationship in Ulmus.

Bifunctional Electron-Transporting Agent for Red Colloidal Quantum Dot Light-Emitting Diodes.

Indium phosphide (InP) quantum dots have enabled light-emitting diodes (LEDs) that are heavy-metal-free, narrow in emission linewidth, and physically flexible. However, ZnO/ZnMgO, the electron-transporting layer (ETL) in high-performance red InP/ZnSe/ZnS LEDs, suffers from high defect densities, quenches luminescence when deposited on InP, and induces performance degradation that arises due to trap migration from the ETL to the InP emitting layer. We posited that the formation of Zn2+ traps on the outer ZnS shell, combined with sulfur and oxygen vacancy migration between ZnO/ZnMgO and InP, may account for this issue. We synthesized therefore a bifunctional ETL (CNT2T, 3',3'″,3'″″-(1,3,5-triazine-2,4,6-triyl)tris(([1,1'-biphenyl]-3-carbonitrile)) designed to passivate Zn2+ traps locally and in situ and to prevent vacancy migration between layers: the backbone of the small molecule ETL contains a triazine electron-withdrawing unit to ensure sufficient electron mobility (6 × 10-4 cm2 V-1 s-1), and the star-shaped structure with multiple cyano groups provides effective passivation of the ZnS surface. We report as a result red InP LEDs having an EQE of 15% and a luminance of over 12,000 cd m-2; this represents a record among organic-ETL-based red InP LEDs.

Generation of discrete higher-order optical vortex lattice at focus.

Higher-order vortices (HOVs) extend the dimensions of optical vortex regulation, which is of great significance in optical communication and optical tweezers. Herein, we demonstrate an alternative scheme to produce a HOV in the focus plane using multiple Laguerre-Gaussian (LG) beam interference, termed a discrete higher-order optical vortex lattice (DHOVL). The modulation depth of the DHOVL exceeds 2π. In this case, the topological charge (TC) of the DHOVL is determined by the difference of the phase period between the innermost and the outermost interference beams. Compared with a conventional HOV (CHOV), the vortex exists in a form of multiple unit singularities sharing a dark core. In addition, the average orbital angular momentum per photon of the DHOVL increases with increasing TC, surpassing that of the CHOV. This work provides a novel, to the best of our knowledge, scheme to produce a HOV, which will facilitate several advanced applications, including optical micromanipulation, optical sensing and imaging, and optical fabrication.

A Cytoplasm-Specific Fluorescent Ligand for Selective Imaging of RNA G-Quadruplexes in Live Cancer Cells.

The development of site-specific, target-selective and biocompatible small molecule ligands as a fluorescent tool for real-time study of cellular functions of RNA G-quadruplexes (G4s), which are associated with human cancers, is of significance in cancer biology. We report a fluorescent ligand that is a cytoplasm-specific and RNA G4-selective fluorescent biosensor in live HeLa cells. The in vitro results show that the ligand is highly selective targeting RNA G4s including VEGF, NRAS, BCL2 and TERRA. These G4s are recognized as human cancer hallmarks. Moreover, intracellular competition studies with BRACO19 and PDS, and the colocalization study with G4-specific antibody (BG4) in HeLa cells may support that the ligand selectively binds to G4s in cellulo. Furthermore, the ligand was demonstrated for the first time in the visualization and monitoring of dynamic resolving process of RNA G4s by the overexpressed RFP-tagged DHX36 helicase in live HeLa cells.

Adaptive Bayesian sum of trees model for covariate-dependent spectral analysis.

This paper introduces a flexible and adaptive nonparametric method for estimating the association between multiple covariates and power spectra of multiple time series. The proposed approach uses a Bayesian sum of trees model to capture complex dependencies and interactions between covariates and the power spectrum, which are often observed in studies of biomedical time series. Local power spectra corresponding to terminal nodes within trees are estimated nonparametrically using Bayesian penalized linear splines. The trees are considered to be random and fit using a Bayesian backfitting Markov chain Monte Carlo (MCMC) algorithm that sequentially considers tree modifications via reversible-jump MCMC techniques. For high-dimensional covariates, a sparsity-inducing Dirichlet hyperprior on tree splitting proportions is considered, which provides sparse estimation of covariate effects and efficient variable selection. By averaging over the posterior distribution of trees, the proposed method can recover both smooth and abrupt changes in the power spectrum across multiple covariates. Empirical performance is evaluated via simulations to demonstrate the proposed method's ability to accurately recover complex relationships and interactions. The proposed methodology is used to study gait maturation in young children by evaluating age-related changes in power spectra of stride interval time series in the presence of other covariates.

Epithelial lining fluid concentrations of ceftriaxone in children with community-acquired pneumonia.

Ceftriaxone is widely used in children with community-acquired pneumonia. Currently, there are no available data regarding epithelial lining fluid (ELF) concentrations of ceftriaxone in children. Thus, blood and bronchoalveolar lavage fluids samples were collected by using an opportunistic sampling design, then we determined plasma and ELF concentrations in 22 children (0.5-11.7 years), with a total of 36 plasma and 22 ELF samples available for analysis. Ceftriaxone plasma and ELF concentrations ranged from 1.07 to 138.71 mg/L and from 0.61 to 26.69 mg/L, respectively. Ceftriaxone concentration in ELF was 12.18 ± 5.15 (mean ± standard deviation) times higher than that in plasma, ranging from 1.29 to 20.44.

Aggregation-Induced emission photosensitizer with lysosomal response for photodynamic therapy against cancer.

Photosensitizers play a key role in bioimaging and photodynamic therapy (PDT) of cancer. However, conventional photosensitizers usually do not achieve the desired efficacy in PDT due to their poor photostability, targeting ability, and responsiveness. Herein, we designed a series of photosensitizers with aggregation-induced emission (AIE) effect using benzothiazole- triphenylamine (BZT-triphenylamine) as the parent nucleus. The synthesized compound SIN ((E)-2-(4-(diphenylamino)styryl)-3-(4-iodobutyl)benzo[d]thiazol-3-ium) exhibits good biocompatibility, photostability, and bright emission in the near-infrared range (600-800 nm). The fluorescence emission intensity is responsive to viscosity, with significant fluorescence enhancement (48 times) and high fluorescence quantum yield (4.45 %) at high viscosity. Moreover, SIN has particular lysosome targeting properties with a Pearson correlation coefficient (PCC) of 0.97 and has good 1O2 generation ability under white light irradiation, especially in a weak acidic environment. Thus, SIN can realize good bioimaging ability and photodynamic therapeutic efficacy under the highly viscous and weakly acidic environment of lysosomes in the tumor cells. This study indicates that SIN has potential as a multifunctional organic photosensitizer for bioimaging and PDT of tumor.

Analysis of enhanced CT imaging signs and clinicopathological prognostic factors in hepatoid adenocarcinoma of stomach patients with radical surgery: a retrospective study.

BACKGROUND: To investigate the association between CT signs and clinicopathological features and disease recurrence in patients with hepatoid adenocarcinoma of stomach (HAS). METHODS: Forty nine HAS patients undergoing radical surgery were retrospectively collected. Association between CT and clinicopathological features and disease recurrence was analyzed. Multivariate logistic model was constructed and evaluated for predicting recurrence by using receiver operating characteristic (ROC) curve. Survival curves between model-defined risk groups was compared using Kaplan-Meier method. RESULTS: 24(49.0%) patients developed disease recurrence. Multivariate logistic analysis results showed elevated serum CEA level, peritumoral fatty space invasion and positive pathological vascular tumor thrombus were independent factors for disease recurrence. Odds ratios were 10.87 (95%CI, 1.14-103.66), 6.83 (95%CI, 1.08-43.08) and 42.67 (95%CI, 3.66-496.85), respectively. The constructed model showed an area under ROC of 0.912 (95%CI,0.825-0.999). The model-defined high-risk group showed poorer overall survival and recurrence-free survival than the low-risk group (both P < 0.001). CONCLUSIONS: Preoperative CT appearance of peritumoral fatty space invasion, elevated serum CEA level, and pathological vascular tumor thrombus indicated poor prognosis of HAS patients.

Activation of the hedgehog signaling pathway is associated with the promotion of cell proliferation and epithelial-mesenchymal transition in chronic rhinosinusitis with nasal polyps.

PURPOSE: To investigate the pathogenesis of the hedgehog (Hh) signaling pathway activated by inflammation in the development of chronic rhinosinusitis with nasal polyps (CRSwNP). METHODS: The 82 people including CRSwNP patients (case group) and nasal septal deviation patients (control group) were recruited. The samples in the case group were collected and classified into two groups: mucosal tissue of nasal polyps (NP group) and mucosal tissue adjacent to nasal polyps (NM group), the samples were collected from the control group as CM group. Clinical characteristics were assessed. Hematoxylin and eosin (H&E) and immunohistochemical (IHC) staining were performed to detect eosinophils (EOS), the expression of the key genes of the pathway and epithelial-mesenchymal transition (EMT) markers in the samples. RESULTS: There were significant differences in the nasal obstruction visual analog scale (VAS) score, rhinorrhea VAS score, percentage of blood EOS, blood EOS absolute counts and tissue EOS counts in the case group compared with the control group (P < 0.05). The EOS level and expression levels of PTCH1, SMO, Gli1, Gli2, Ki67 and vimentin were higher in NP group than in the other two groups (P < 0.05). E-cadherin expression was decreased in NP group (P < 0.05). A positive correlation between PTCH1 expression and CRSwNP Lund-Mackay score in NP group. CONCLUSIONS: Our results indicated that the activation of Hh signaling pathway might promote cell proliferation and EMT occurrence, ultimately leading to the development of CRSwNP, which might provide a new target for treatment.

Rituximab treatment for refractory nephrotic syndrome in adults: a multicenter retrospective study.

BACKGROUND: The treatment of refractory nephrotic syndrome (RNS) is full of challenges and the role of rituximab (RTX) is not well-established, thus this study aims to demonstrate the role of RTX in RNS. METHODS: This was a multicenter retrospective study of all adult patients receiving RTX for RNS. Patients enrolled were divided into two groups according to pathological pattern: 20 patients as a group of podocytopathy (including minimal change disease [MCD] and focal and segmental glomerulosclerosis [FSGS]), and 26 patients as membranous nephropathy (MN) group. The remission rate, relapse rate, adverse effects, and predictors of remission were analyzed. RESULTS: A total of 75 patients received RTX for RNS and 48 were available for analysis after exclusion criteria. No significant difference in the remission rate at 6 or 12 months was observed between the MCD/FSGS and MN cases (p > 0.05). The median duration of the first complete remission (CR) was 1 month in the podocytopathy group and 12.5 months in the MN group. Three relapses were associated with infection as the ultimate outcome, and 6 out of 48 remained refractory representing a response rate of 87.5% in RNS. Clinical predictors of cumulative CR were estimated glomerular filtration rate (eGFR) <60 mL/min/1.73 m2 and mean arterial pressure (MAP) ≤103 mmHg at the beginning of therapy in patients with MN. No serious adverse effects were reported. CONCLUSIONS: RTX appears to be effective in RNS across various clinical and pathological subtypes, exhibiting a low relapse rate and minimal significant side effects in the majority of patients.

Iodotrimethylsilane as a Reactive Ligand for Surface Etching and Passivation of Perovskite Nanocrystals toward Efficient Pure-red to Deep-red LEDs.

Resurfacing perovskite nanocrystals (NCs) with tight-binding and conductive ligands to resolve the dynamic ligands-surface interaction is the fundamental issue for their applications in perovskite light-emitting diodes (PeLEDs). Although various types of surface ligands have been proposed, these ligands either exhibit weak Lewis acid/base interactions or need high polar solvents for dissolution and passivation, resulting in a compromise in the efficiency and stability of PeLEDs. Herein, we report a chemically reactive agent (Iodotrimethylsilane, TMIS) to address the trade-off among conductivity, solubility and passivation using all-inorganic CsPbI3 NCs. The liquid TMIS ensures good solubility in non-polar solvents and reacts with oleate ligands and produces in situ HI for surface etching and passivation, enabling strong-binding ligands on the NCs surface. We report, as a result, red PeLEDs with an external quantum efficiency (EQE) of ≈23 %, which is 11.2-fold higher than the control, and is among the highest CsPbI3 PeLEDs. We further demonstrate the universality of this ligand strategy in the pure bromide system (CsPbBr3 ), and report EQE of ≈20 % at 640, 652, and 664 nm. This represents the first demonstration of a chemically reactive ligand strategy that applies to different systems and works effectively in red PeLEDs spanning emission from pure-red to deep-red.

Dipole Engineering through the Orientation of Interface Molecules for Efficient InP Quantum Dot Light-Emitting Diodes.

InP-based quantum dot (QD) light-emitting diodes (QLEDs) provide a heavy-metal-free route to size-tuned LEDs having high efficiency. The stability of QLEDs may be enhanced by replacing organic hole-injection layers (HILs) with inorganic layers. However, inorganic HILs reported to date suffer from inefficient hole injection, the result of their shallow work functions. Here, we investigate the tuning of the work function of nickel oxide (NiOx) HILs using self-assembled molecules (SAMs). Density functional theory simulations and near-edge X-ray absorption fine structure put a particular focus onto the molecular orientation of the SAMs in tuning the work function of the NiOx HIL. We find that orientation plays an even stronger role than does the underlying molecular dipole itself: SAMs having the strongest electron-withdrawing nitro group (NO2), despite having a high intrinsic dipole, show limited work function tuning, something we assign to their orientation parallel to the NiOx surface. We further find that the NO2 group─which delocalizes electrons over the molecule by resonance─induces a deep lowest unoccupied molecular orbital level that accepts electrons from QDs, producing luminescence quenching. In contrast, SAMs containing a trifluoromethyl group exhibit an angled orientation relative to the NiOx surface, better activating hole injection into the active layer without inducing luminescence quenching. We report an external quantum efficiency (EQE) of 18.8%─the highest EQE among inorganic HIL-based QLEDs (including Cd-based QDs)─in InP QLEDs employing inorganic HILs.