Dynamic in situ growth of bonded-phase silica nanospheres on silica capillary inner walls for open-tubular liquid chromatography.

Silica nanospheres (SNS) were grown on the inner walls of silica capillaries through a dynamic in situ nucleation process to prepare a highly porous and large accessible surface area substrate. The SNS were then functionalized with octadecyl (C18), 3-aminopropyltriethoxysilane (APTES), beta-cyclodextrin (ß-CD), and amino groups to develop robust and efficient chromatographic stationary phases. The modified silica capillaries were exploited for open-tubular liquid chromatography (OT-LC) and open-tubular capillary electrochromatography (OT-CEC) applications. The prepared stationary phases were compared to conventional capillaries in terms of separation performance. The synthesis process was optimized, and the bonded-phase stationary phases were characterized by the electron microscopy technique. The effects of different solvents, additives, and functional groups on the geometry and chromatographic resolving power of the SNS were envisaged. The capillaries modified with octadecyl groups were evaluated for the separation of non-steroidal anti-inflammatory drugs, phenones, alkenylbenzenes, and enantiomers of chlorophenoxy herbicides. As an application instance, an SNS-C18-coated capillary was utilized for the separation of alkenylbenzenes from clove extract and protein digest medium, through OT-LC and OT-CEC techniques, respectively. The ß-CD functionalized capillary was applied for the OT-CEC separation of a dichlorprop racemic mixture.

Micelle to cyclodextrin stacking in open-tubular liquid chromatography using capillaries coated with surfactant admicelles.

In-line sample concentration by micelle to cyclodextrin stacking (MCDS) in open-tubular liquid chromatography (OT-LC) with UV detection is described. OT-LC of two sets of analytes (small-molecule drugs and neutral alkenylbenzenes) was by the use of a fused-silica capillary that was coated with admicelles of didodecyldimethyl ammonium bromide (DDAB). These admicelles acted as a stationary chromatographic pseudophase. The mobile phase was 25 mM sodium tetraborate in 10% methanol, pH 9.2. MCDS was by long pressure injection of samples prepared in 10 mM hexadecyltrimethyl ammonium bromide (CTAB) in 25 mM sodium tetraborate, pH 9.2 (buffer), followed by injection of 50 mM α-CD in buffer (CD solution). Stacking was by application of voltage at -20 kV prior to pressure-driven OT-LC. The factors that influenced MCDS such as type and concentration of CD, concentration of CTAB in the sample, injection time ratio of the sample and the CD solution and stacking time were studied. Under optimised conditions, sensitivity enhancement factors (SEFs) were between 19 and 23, linear ranges were between 0.5 and 10 µg/mL with r2 > 0.99 and inter-day/intra-day repeatability in retention time and peak area were ≤5.6% for the model small-molecule drugs. Application to real samples was by the determination of potentially toxic alkenylbenzenes (SEFs = 10 to 12) in basil-leaf and whole-clove extracts. The assay results were comparable to those obtained from an in-house high-performance liquid chromatography-UV method.

In-line sample concentration in capillary electrophoresis by cyclodextrin to admicelle microextraction.

Cyclodextrins (CDs) as a pseudophase in pseudophase-to-pseudophase microextraction (P2ME) in capillary zone electrophoresis (CZE) are proposed. In this P2ME mode called CD to admicelle ME, a long plug of dilute analyte solution prepared in cetyltrimethylammonium bromide (CTAB) at the critical micellar concentration was injected into the capillary. This formed CTAB admicelles at the interface between the solution and the negatively charged capillary surface, where the analytes were trapped. The injection of CD solution released the admicelles and the analytes from the capillary surface due to the formation of stable CD/CTAB inclusion complexes. The analytes are concentrated at the CD front during injection and voltage separation. Various neutral CDs were found to be effective for CD to admicelle ME. To implement this in-line sample concentration technique in CZE, CD concentration, sample injection time, and sample:CD solution injection ratio were optimized. The optimized conditions for five model anionic analytes, namely, 4-bromophenol, sulindac, sulfamethizole, 4-vinylbenzoic acid, and succinylsulfathiazole, were 20 mM α-CD in 20 mM sodium tetraborate (pH 9.2) solution, sample injection time of 370 s, and CD:sample injection ratio of 1:2. The sensitivity enhancement factors (SEFs) were between 112 and 168. The SEFs of sulindac and sulfamethizole in particular were similar to previously published off-line microextraction techniques, which are typically time-consuming. The calculated values of LOQ, intra-/inter-day (n = 6/n = 10, 3 days) repeatability, and linearity (R2) of CD to admicelle ME were 0.0125-0.05 µg/mL, 1.5-4.6%, 1.8-4.8%, and ≥0.999, respectively. Finally, the potential of CD to admicelle ME to the analysis of artificial urine samples was demonstrated.

Chiral separation using cyclodextrins as mobile phase additives in open-tubular liquid chromatography with a pseudophase coating.

The chiral separation of various analytes (dichlorprop, mecoprop, ibuprofen, and ketoprofen) was demonstrated with different cyclodextrins as mobile phase additives in open-tubular liquid chromatography using a stationary pseudophase semipermanent coating. The stable coating was prepared by a successive multiple ionic layer approach using poly(diallyldimethylammonium chloride), polystyrene sulfonate, and didodecyldimethyl ammonium bromide. Increasing concentrations (0-0.2 mM) of various native and derivatized cyclodextrins in 25 mM sodium tetraborate (pH 9.2) were investigated. Chiral separation was achieved for the four test analytes using 0.05-0.1 mM ß-cyclodextrin (resolution between 1.11 and 1.34), γ-cyclodextrin (resolution between 0.78 and 1.27), carboxymethyl-ß-cyclodextrin (resolution between 1.64 and 2.59), and 2-hydroxypropyl-ß-cyclodextrin (resolution between 0.71 and 1.76) with the highest resolutions obtained with 0.1 mM carboxymethyl-ß-cyclodextrin. %RSD values were <10%. This is the first demonstration of chiral open-tubular liquid chromatography using achiral chromatographic coatings and cyclodextrins as mobile phase additives.

Bile Salts in Chiral Micellar Electrokinetic Chromatography: 2000-2020.

Bile salts are naturally occurring chiral surfactants that are able to solubilize hydrophobic compounds. Because of this ability, bile salts were exploited as chiral selectors added to the background solution (BGS) in the chiral micellar electrokinetic chromatography (MEKC) of various small molecules. In this review, we aimed to examine the developments in research on chiral MEKC using bile salts as chiral selectors over the past 20 years. The review begins with a discussion of the aggregation of bile salts in chiral recognition and separation, followed by the use of single bile salts and bile salts with other chiral selectors (i.e., cyclodextrins, proteins and single-stranded DNA aptamers). Advanced techniques such as partial-filling MEKC, stacking and single-drop microextraction were considered. Potential applications to real samples, including enantiomeric impurity analysis, were also discussed.

High Performance Liquid Chromatography versus Stacking-Micellar Electrokinetic Chromatography for the Determination of Potentially Toxic Alkenylbenzenes in Food Flavouring Ingredients.

Alkenylbenzenes, including eugenol, methyleugenol, myristicin, safrole, and estragole, are potentially toxic phytochemicals, which are commonly found in foods. Occurrence data in foods depends on the quality of the analytical methodologies available. Here, we developed and compared modern reversed-phase high performance liquid chromatography (HPLC) and stacking-micellar electrokinetic chromatography (MEKC) methods for the determination of the above alkenylbenzenes in food flavouring ingredients. The analytical performance of HPLC was found better than the stacking-MEKC method. Compared to other HPLC methods found in the literature, our method was faster (total run time with conditioning of 15 min) and able to separate more alkenylbenzenes. In addition, the analytical methodology combining an optimized methanol extraction and proposed HPLC was then applied to actual food flavouring ingredients. This methodology should be applicable to actual food samples, and thus will be vital to future studies in the determination of alkenylbenzenes in food.

Enrichment and Separation of Cationic, Neutral, and Chiral Analytes by Micelle to Cyclodextrin Stacking-Micellar Electrokinetic Chromatography.

Analyte focusing by micelle to cyclodextrin stacking (MCDS) in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) and fused silica capillaries is demonstrated for neutral, cationic, and chiral analytes. The stacking was at a dynamic boundary formed between the injected charged SDS micelles and neutral γ-cyclodextrin (γ-CD) zones, where the analytes bound inside micelles were released due to the formation of stable SDS-CD inclusion complexes. The complex formation reduced or eliminated the affinity of the analytes to the micellar phase. There was reversal (for charged) or nulling (for neutrals) of the analyte's effective electrophoretic mobility that caused the analytes to accumulate at the boundary. Under the conditions where the SDS micelles velocity is faster than the electroosmotic flow (using acidic buffer), MCDS was conducted by injection of a long plug of sample in a micellar diluent after injection of a CD solution plug into a capillary that was filled with MEKC background solution. By simply extending the length of the CD plug, chiral separations of chlorpheniramine and phenoxyacid herbicides were achieved without optimizing the MEKC conditions. The analytical figures of merit including linearity and repeatability for the tested compounds were found acceptable, and the sensitivity enhancement factors were up to 171. The stacking strategy in MEKC was applied to metabolic stability studies of small molecules with HepG2 cell line, where the samples were only treated with acetonitrile and then diluted with the micellar diluent (demonstrating the reduction of tedious sample preparation requirements for biological samples prior to chemical analysis).

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018).

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Chiral Selectors in Capillary Electrophoresis: Trends During 2017⁻2018.

Chiral separation is an important process in the chemical and pharmaceutical industries. From the analytical chemistry perspective, chiral separation is required for assessing the fit-for-purpose and the safety of chemical products. Capillary electrophoresis, in the electrokinetic chromatography mode is an established analytical technique for chiral separations. A water-soluble chiral selector is typically used. This review therefore examines the use of various chiral selectors in electrokinetic chromatography during 2017⁻2018. The chiral selectors were both low and high (macromolecules) molecular mass molecules as well as molecular aggregates (supramolecules). There were 58 papers found by search in Scopus, indicating continuous and active activity in this research area. The macromolecules were sugar-, amino acid-, and nucleic acid-based polymers. The supramolecules were bile salt micelles. The low molecular mass selectors were mainly ionic liquids and complexes with a central ion. A majority of the papers were on the use or preparation of sugar-based macromolecules, e.g., native or derivatised cyclodextrins. Studies to explain chiral recognition of macromolecular and supramolecular chiral selectors were mainly done by molecular modelling and nuclear magnetic resonance spectroscopy. Demonstrations were predominantly on drug analysis for the separation of racemates.

Pressurized Hot Water Extraction and Capillary Electrophoresis for Green and Fast Analysis of Useful Metabolites in Plants.

The search for useful compounds from plants is an important research area. Traditional screening that involves isolation and identification/quantitation is tedious, time consuming, and generates a significant amount of chemical waste. Here, we present a simple, fast, and green strategy to assess ≥0.1% wt/wt quantities of useful compounds in plants/spices using pressurized hot water extraction using a household espresso machine followed by chemical analysis using capillary electrophoresis. Three demonstrations with polygodial, cinnamaldehyde, coumarin, and shikimic acid as target metabolites are shown. Direct analysis of extracts was by the developed micellar electrokinetic chromatography and capillary zone electrophoresis methods. The approach, which can be implemented in less developed countries, can process many samples within a day, much faster than traditional techniques that would normally take at least a day. Finally, 0.8-1.1% wt/wt levels of shikimic acid were found in Tasmanian-pepperberry and Tasmanian-fuschia leaves via the approach.

We've Come a Long Way, Baby: Announcing a Special Issue to Commemorate the Publication of Molecule's 20,000th Paper.

On behalf of my Section Editor-in-Chief co-author colleagues I am pleased to announce a Special Issue to commemorate the recent publication of Molecules' 20,000th paper [...].

Membrane-Free Electrokinetic Device Integrated to Electrospray-Ionization Mass Spectrometry for the Simultaneous Removal of Sodium Dodecyl Sulfate and Enrichment of Peptides.

The removal of sodium dodecyl sulfate (SDS) in SDS-assisted proteomics with electrospray-ionization-mass-spectrometric (ESI-MS) analysis is an essential step in the analysis. Off-line state-of-the-art sample-preparation strategies can allow 100% removal of DS- and up to 100% peptide recoveries. These strategies, however, are typically laborious and require long analysis times and a complex experimental setup. Here, we developed a simple, membrane-free, electrokinetic, on-line, integrated SDS removal-ESI-MS device that was able to enhance ESI-MS signals of bradykinin and peptides from trypsin-digested bovine serum albumin (BSA) in samples that contained SDS micelles. The significant peptide-signal improvements were contributed by the complete removal of DS- and the enrichment of the peptides in the presence of an electric field. Enrichment was via micelle-to-solvent stacking, initially developed in capillary electrophoresis. Bradykinin percent recovery was 800%, and BSA peptide percent recovery was 87%. Enhancement factors in ESI-MS signals (after and before removal) for selected m/ z values of peptides from the BSA digest were 535-693.

Room temperature synthesis and binding studies of solution-processable histamine-imprinted microspheres.

Accurate quantification of histamine levels in food and in biological samples is important for monitoring the quality of food products and for the detection of pathophysiological conditions. In this study, solution processable histamine-imprinted microspheres were synthesized at 30°C via dilute free radical phototochemical polymerization technique using ethylene glycol dimethacrylate (EGDMA) as the crosslinker and methacrylic acid (MAA) as the monomer. The processability of the resulting polymer is dictated by the monomer feed concentration (eg, 4 wt% 80:20 EGDMA:MAA formulation) and solvent (acetonitrile). Whereas, the particle size is influenced by the monomer feed concentration, the presence of template molecule, and independent of the crosslinker content. Evaluation of the binding performance of the photochemically imprinted polymers (PCP) with different crosslinker content (80 and 90 wt%) indicated that the selective binding capacity was notably higher in PCP-80 (N= 16.0 µmol/g) compared to PCP-90 (N= 10.1 µmol/g) when analyzed via frontal analysis capillary electrophoresis (FACE) using Freundlich isotherm. In addition, PCP-80 microspheres are more selective toward histamine than conventional thermal polymers (CTP-80) prepared at 60°C in the presence of structural analogs such as histidine, imidazole, and tryptamine under cross-rebinding and competitive conditions. These results demonstrated that histamine-selective imprinted polymers can be obtained readily using room temperature photochemical polymerization where these materials can be subsequently used as recognition element for optical-based histamine sensing.

Derivatisation for separation and detection in capillary electrophoresis (2015-2017).

Derivatisation is an integrated part of many analytical workflows to enable separation and detection of the analytes. In CE, derivatisation is adapted in the four modes of pre-capillary, in-line, in-capillary, and post-capillary derivatisation. In this review, we discuss the progress in derivatisation from February 2015 to May 2017 from multiple points of view including sections about the derivatisation modes, derivatisation to improve the analyte separation and analyte detection. The advancements in derivatisation procedures, novel reagents, and applications are covered. A table summarising the 46 reviewed articles with information about analyte, sample, derivatisation route, CE method and method sensitivity is provided.

Recent developments in open tubular capillary electrochromatography from 2016 to 2017.

Interest in open-tubular capillary electrochromatography (OT-CEC) continues to thrive because of the inherent advantage of OT-CEC combining the high efficiency of capillary electrophoresis and the high selectivity of high performance liquid chromatography. For the period 2016 to 2017, novel materials have been developed as first-time stationary phases for OT-CEC and are grouped in this review as polymer-based materials, frameworks, nanoparticles, graphene-based materials, and biomaterials. Coating and fabrication methods mostly rely on covalent coating strategies while non-covalent immobilisation strategies like electrostatic assembly are notably still being employed. The concern of overcoming phase ratio challenges in OT-CEC coatings have also generated adoption of combined coating strategies including multi-layering, layer-by-layer self-assembly and methods adapted from nanofilm fabrications like epitaxial growth, liquid phase deposition, or nucleation of crystal growth. The emergence of non-conventional coating characterisation methods such as transmission electron microscopy, X-ray diffraction or X-ray photoelectron spectroscopy is also discussed.

Determination of Biogenic Amines in Seawater Using Capillary Electrophoresis with Capacitively Coupled Contactless Conductivity Detection.

A rapid and green analytical method based on capillary electrophoresis with capacitively coupled contactless conductivity detection (C4D) for the determination of eight environmental pollutants, the biogenic amines (putrescine, cadaverine, spermidine, spermine, tyramine, 2-phenylamine, histamine and tryptamine), is described. The separation was achieved under normal polarity mode at 24 °C and 25 kV with a hydrodynamic injection (50 mbar for 5 s) and using a bare fused-silica capillary (95 cm length × 50 µm i.d.) (detection length of 10.5 cm from the outlet end of the capillary). The optimized background electrolyte consisted of 400 mM malic acid. C4D parameters were set at a fixed amplitude (50 V) and frequency (600 kHz). Under the optimum conditions, the method exhibited good linearity over the range of 1.0⁻100 µg mL−1 (R² ≥ 0.981). The limits of detection based on signal to noise (S/N) ratios of 3 and 10 were ≤0.029 µg mL−1. The method was used for the determination of seawater samples that were spiked with biogenic amines. Good recoveries (77⁻93%) were found.

Sample Clean-up Strategies for ESI Mass Spectrometry Applications in Bottom-up Proteomics: Trends from 2012 to 2016.

Bottom-up proteomics is a mass spectrometric (MS)-based approach for the characterization of peptides obtained from in-solution protein digestion. MS is favored over other methods for peptide and protein analysis because of its better sensitivity and high throughput. Inorganic ions and surfactants present in the sample or produced during tryptic digestion are detrimental in MS analysis and affect the proteome data, thus sample preparation for removal of these unwanted components has become essential. Here, we review 48 research papers on strategies for removal of salts and surfactants (in particular, SDS) prior to ESI-MS analysis in bottom-up proteomics from 2012 to 2016. The strategies were mostly based on SPE and membrane-based filter-aided sample preparation for salt and SDS removal, respectively. Some known limitations of SPE and filter-aided sample preparation procedures are that they can be time consuming, laborious, and require the use of organic solvents before a concentrated extract suitable for analysis is obtained. The development of faster analytical methods by reducing the sample preparation time and thereby, increasing sample throughput, and in a solvent-less and membrane-less operation, is a significant contribution to proteome research.

Electrokinetic Removal of Dodecyl Sulfate Micelles from Digested Protein Samples Prior to Electrospray-Ionization Mass Spectrometry.

In proteomics, dodecyl sulfate (DS-) as sodium salt is commonly used in protein solubilization prior to tryptic digestion, but the presence of the DS- hampers the electrospray ionization mass spectrometric (ESI-MS) analysis. The development of DS- depletion techniques is therefore important especially when dealing with small samples where there could be poor sensitivity due to sample loss or dilution during sample preparation. Here, we present a simple and fast electrokinetic removal method of DS- from small volumes of peptide and digested protein samples prior to ESI-MS. The selective removal was accomplished using an acidic extraction solution (ES) containing acetonitrile (ACN) inside a fused-silica capillary that was dipped into the sample. The use of acidic ES suppressed the electroosmotic flow; allowing the electrokinetic movement of DS- monomers and micelles into the capillary. The high amount of ACN present at the tip of the capillary served to collapse the micelles migrating into the capillary, thereby releasing the peptides that were bound to these micelles, facilitating peptide retention in the sample and efficient DS- removal. Increased % MS signal intensity (SI) restoration of the peptide was observed, while DS- removal was unaffected when the amount of ACN in the ES was increased. This is because of the micelle to solvent stacking mechanism (effective electrophoretic mobility reversal) working at high concentration of ACN for the improved recovery of the peptides. % MS SI restoration for the Z-Gly-Gly-Val and bradykinin peptides were 75-83% while % MS SI reduction of DS- was up to 99% under optimal conditions, that is, 40% ACN in the ES. Higher % peptide recoveries from digested protein samples were obtained using the proposed method compared to the conventional cold acetone precipitation method.

Sample Concentration of Charged Small Molecules and Peptides in Capillary Electrophoresis by Micelle to Cyclodextrin Stacking.

A stacking approach in capillary electrophoresis based on the reversal of the analytes' effective electrophoretic velocities at a dynamic stacking boundary formed between charged micelles (i.e., from long chain ionic surfactants) and neutral cyclodextrins (i.e., native α-, ß-, or γ-cyclodextrin) is presented. The approach was demonstrated by the long injection of samples in a micellar solution followed by injection of a cyclodextrin solution zone, and then separation by co-electro-osmotic flow capillary zone electrophoresis. The reversal is caused by the formation of stable cyclodextrin-surfactant complexes at the boundary that significantly decreased the retention factor of the analytes in the presence of a micellar pseudostationary phase. The dynamic boundary was formed at the cyclodextrin zone as the micelles penetrated this zone. Under optimum conditions, the boundary disappears, and the stacking ends when all the micelles have electrophoretically migrated to the boundary. Cationic and anionic small molecules were enriched using oppositely charged micelles from sodium dodecyl sulfate and cetyltrimethylammonium bromide, respectively. There were 1-2 orders of concentration magnitude improvement in analyte detection, which is expected in stacking with hydrodynamic injection. The improvements in the peak signals (height/corrected area) were up to 236/445 and 101/76 for the cationic and anionic analytes tested, respectively. Linearity (r2) and repeatability (%RSD of migration time, peak height, and corrected peak area) under the chosen stacking conditions (cations/anions) were ≥0.998/≥0.995 and ≤3.8%/≤5.7%, respectively. The stacking approach was also implemented in the direct analysis of peptides from trypsin digested bovine serum albumin.

Assessment of the binding performance of histamine-imprinted microspheres by frontal analysis capillary electrophoresis.

Frontal analysis capillary electrophoresis was used to evaluate the binding performance of molecularly imprinted microspheres (MIM) toward its template histamine and analogs at pH 7, and compared to the high performance liquid chromatographic method. In both methods, batch binding was employed and the binding parameters were calculated from the measured concentration of unbound amine analytes and afforded comparable histamine equilibrium dissociation constants (Kd ∼ 0.4 mM). FACE was easily carried out at shorter binding equilibration time (i.e. 30 min) and without the need to separate the microspheres, circumventing laborious and, in the case of the system under study, inefficient sample filtration. It also allowed for competitive binding studies by virtue of its ability to distinctly separate intact microspheres and all tested amines which could not be resolved in HPLC. Kd 's for nonimprinted (control) microspheres (NIM) from FACE and HPLC were also comparable (∼ 0.6 mM) but at higher histamine concentrations, HPLC gave lower histamine binding. This discrepancy was attributed to inefficient filtration of the batch binding samples prior to HPLC analysis resulting in an over-estimation of the concentration of free histamine brought about by the presence of unfiltered histamine-bound microspheres.