Multinuclear Residual Quadrupolar Couplings for Structure and Assignment.

Most stable isotopes have a nuclear spin >1/2, but the quadrupole interaction poses challenge on their detection by nuclear magnetic resonance (NMR). On the other hand, the quadrupole interaction is a rich source of structural information that may be exploited for solution NMR in the form of residual quadrupolar couplings (RQCs) of weakly oriented samples. While 2H RQCs are now well established for structure verification and enantiomeric discrimination of organic molecules, we will in this article highlight some recent work on RQCs of other nuclei (especially 7Li and 11B).

Can simple 'molecular' corrections outperform projector augmented-wave density functional theory in the prediction of 35 Cl electric field gradient tensor parameters for chlorine-containing crystalline systems?

Many-body expansion (MBE) fragment approaches have been applied to accurately compute nuclear magnetic resonance (NMR) parameters in crystalline systems. Recent examples demonstrate that electric field gradient (EFG) tensor parameters can be accurately calculated for 14 N and 17 O. A key additional development is the simple molecular correction (SMC) approach, which uses two one-body fragment (i.e., isolated molecule) calculations to adjust NMR parameter values established using 'benchmark' projector augmented-wave (PAW) density functional theory (DFT) values. Here, we apply a SMC using the hybrid PBE0 exchange-correlation (XC) functional to see if this can improve the accuracy of calculated 35 Cl EFG tensor parameters. We selected eight organic and two inorganic crystal structures and considered 15 chlorine sites. We find that this SMC improves the accuracy of computed values for both the 35 Cl quadrupolar coupling constant (CQ ) and the asymmetry parameter ( η Q ) by approximately 30% compared with benchmark PAW DFT values. We also assessed a SMC that offers local improvements not only in terms of the quality of the XC functional but simultaneously in the quality of the description of relativistic effects via the inclusion of spin-orbit effects. As the inorganic systems considered contain heavy atoms bonded to the chlorine atoms, we find further improvements in the accuracy of calculated 35 Cl EFG tensor parameters when both a hybrid functional and spin-orbit effects are included in the SMC. On the contrary, for chlorine-containing organics, the inclusion of spin-orbit relativistic effects using a SMC does not improve the accuracy of computed 35 Cl EFG tensor parameters.

Electric-Field-Induced Selective Directed Transport of Diverse Droplets.

Droplet directional transport is one of the central topics in microfluidics and lab-on-a-chip applications. Selective transport of diverse droplets, particularly in another liquid phase environment with controlled directions, is still challenging. In this work, we propose an electric-field gradient-driven droplet directional transport platform facilitated by a robust lubricant surface. On the platform, we clearly demonstrated a liquid-inherent critical frequency-dominated selective transport of diverse droplets and a driving mechanism transition from electrowetting to liquid dielectrophoresis. Enlightened by the Kelvin-Helmholtz theory, we first realize the directional droplet transport in another liquid phase whenever a permittivity difference exists. Co-transport of multiple droplets and various combinations of droplet types, as well as multifunctional droplet transport modes, are realized based on the presented powerful electric-field gradient-driven platform, overcoming the limitations of the surrounding environment, liquid conductivity, and intrinsic solid-liquid wetting property existing in traditional droplet transport strategies. This work may inspire new applications in liquid separation, multiphase microfluidic manipulation, chemical reagent selection, and so on.

Effect of a weak static magnetic field on nitrogen-14 quadrupole resonance in the case of an axially symmetric electric field gradient tensor.

The application of a weak static B0 magnetic field (less than 1 mT) may produce a well-defined splitting of the (14)N Quadrupole Resonance line when the electric field gradient tensor at the nitrogen nucleus level is of axial symmetry. It is theoretically shown and experimentally confirmed that the actual splitting (when it exists) as well as the line-shape and the signal intensity depends on three factors: (i) the amplitude of B0, (ii) the amplitude and pulse duration of the radio-frequency field, B1, used for detecting the NQR signal, and (iii) the relative orientation of B0 and B1. For instance, when B0 is parallel to B1 and regardless of the B0 value, the signal intensity is three times larger than when B0 is perpendicular to B1. This point is of some importance in practice since NQR measurements are almost always performed in the earth field. Moreover, in the course of this study, it has been recognized that important pieces of information regarding line-shape are contained in data points at the beginning of the free induction decay (fid) which, in practice, are eliminated for avoiding spurious signals due to probe ringing. It has been found that these data points can generally be retrieved by linear prediction (LP) procedures. As a further LP benefit, the signal intensity loss (by about a factor of three) is regained.

Electric field gradient focusing with electro-osmotic flow to reduce analyte dispersion: Concept and numerical investigation.

In proteomics, the need to precisely examine the protein compounds of small samples, requires sensitive analytical methods which can separate and enrich compounds with high precision. Current techniques require a minimal analysis time to obtain satisfactory compound separation where longer analysis time means better separation of compounds. But, molecular diffusion will create broadening of the separated compound bands over time, increasing the peak width, and thus reducing the resolution and the enrichment. Electric field gradient focusing (EFGF) is a separation technique, in which proteins are simultaneously separated and enriched by balancing a gradient electrostatic force with a constant hydrodynamic drag force. Because of this balance, analytes are continuously pushed back to their focusing point, limiting the time-dependent peak broadening due to molecular diffusion. Current EFGF techniques are however still suffering from peak broadening because of flow-profile inhomogeneities. In this paper, we propose to use AC electro-osmotic flow (AC EOF) to create a homogeneous flow in EFGF. The interference between the electric field gradient and the AC EOF was thoroughly analysed and the concept was validated using numerical simulations. The results show that a plug flow is obtained on top of a small, distorted boundary layer. While applying different DC electric fields in the electrolyte, a constant flow velocity can be obtained by including a DC offset to the electrodes generating the AC EOF. The plug flow is then maintained over the whole separation channel length, while an electric field gradient is applied. This way, the flow-induced contribution to peak broadening can be minimized in EFGF devices. By modelling the separation of green fluorescent protein (GFP) and R-Phycoerythrin (R-PE), it was shown that the peak width of separated compounds can be reduced and that the separation resolution can be improved, compared to current EFGF methods.

3D to 0D cesium lead bromide: A 79/81Br NMR, NQR and theoretical investigation.

Inorganic metal halides offer unprecedented tunability through elemental variation of simple three-element compositions, but can exhibit complicated phase behaviour, degradation, and microscopic phenomena (disorder/dynamics) that play an integral role for the bulk-level chemical and physical properties of these materials. Understanding the halogen chemical environment in such materials is crucial to addressing many of the concerns regarding implementing these materials in commercial applications. In this study, a combined solid-state nuclear magnetic resonance, nuclear quadrupole resonance and quantum chemical computation approach is used to interrogate the Br chemical environment in a series of related inorganic lead bromide materials: CsPbBr3, CsPb2Br5, and Cs4PbBr6. The quadrupole coupling constants (CQ) were determined to range from 61 to 114 MHz for 81Br, with CsPbBr3 exhibiting the largest measured CQ and Cs4PbBr6 the smallest. GIPAW DFT was shown to be an excellent pre-screening tool for estimating the EFG of Br materials and can increase experimental efficiency by providing good starting estimates for acquisition. Finally, the combination of theory and experiment to inform the best methods for expanding further to the other quadrupolar halogens is discussed.

Imaging mass spectrometry reveals complex lipid distributions across Staphylococcus aureus biofilm layers.

Introduction: Although Staphylococcus aureus is the leading cause of biofilm-related infections, the lipidomic distributions within these biofilms is poorly understood. Here, lipidomic mapping of S. aureus biofilm cross-sections was performed to investigate heterogeneity between horizontal biofilm layers. Methods: S. aureus biofilms were grown statically, embedded in a mixture of carboxymethylcellulose/gelatin, and prepared for downstream matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI IMS). Trapped ion mobility spectrometry (TIMS) was also applied prior to mass analysis. Results: Implementation of TIMS led to a âˆ¼ threefold increase in the number of lipid species detected. Washing biofilm samples with ammonium formate (150 mM) increased signal intensity for some bacterial lipids by as much as tenfold, with minimal disruption of the biofilm structure. MALDI TIMS IMS revealed that most lipids localize primarily to a single biofilm layer, and species from the same lipid class such as cardiolipins CL(57:0) - CL(66:0) display starkly different localizations, exhibiting between 1.5 and 6.3-fold intensity differences between layers (n = 3, p < 0.03). No horizontal layers were observed within biofilms grown anaerobically, and lipids were distributed homogenously. Conclusions: High spatial resolution analysis of S. aureus biofilm cross-sections by MALDI TIMS IMS revealed stark lipidomic heterogeneity between horizontal S. aureus biofilm layers demonstrating that each layer was molecularly distinct. Finally, this workflow uncovered an absence of layers in biofilms grown under anaerobic conditions, possibly indicating that oxygen contributes to the observed heterogeneity under aerobic conditions. Future applications of this workflow to study spatially localized molecular responses to antimicrobials could provide new therapeutic strategies.

Fast and Accurate Electric Field Gradient Calculations in Molecular Solids With Density Functional Theory.

Modern approaches for calculating electric field gradient (EFF) tensors in molecular solids rely upon plane-wave calculations employing periodic boundary conditions (PBC). In practice, models employing PBCs are limited to generalized gradient approximation (GGA) density functionals. Hybrid density functionals applied in the context of gauge-including atomic orbital (GIAO) calculations have been shown to substantially improve the accuracy of predicted NMR parameters. Here we propose an efficient method that effectively combines the benefits of both periodic calculations and single-molecule techniques for predicting electric field gradient tensors in molecular solids. Periodic calculations using plane-wave basis sets were used to model the crystalline environment. We then introduce a molecular correction to the periodic result obtained from a single-molecule calculation performed with a hybrid density functional. Single-molecule calculations performed using hybrid density functionals were found to significantly improve the agreement of predicted 17O quadrupolar coupling constants (C q ) with experiment. We demonstrate a 31% reduction in the RMS error for the predicted 17O C q values relative to standard plane-wave methods using a carefully constructed test set comprised of 22 oxygen-containing molecular crystals. We show comparable improvements in accuracy using five different hybrid density functionals and find predicted C q values to be relatively insensitive to the choice of basis set used in the single molecule calculation. Finally, the utility of high-accuracy 17O C q predictions is demonstrated by examining the disordered 4-Nitrobenzaldehyde crystal structure.

On the calculation of the electrostatic potential, electric field and electric field gradient from the aspherical pseudoatom model. II. Evaluation of the properties in an infinite crystal.

The previously reported exact potential and multipole moment (EP/MM) method for fast and precise evaluation of the intermolecular electrostatic interaction energies in molecular crystals using the pseudoatom representation of the electron density [Nguyen, Macchi & Volkov (2020), Acta Cryst. A76, 630-651] has been extended to the calculation of the electrostatic potential (ESP), electric field (EF) and electric field gradient (EFG) in an infinite crystal. The presented approach combines an efficient Ewald-type summation (ES) of atomic multipoles up to the hexadecapolar level in direct and reciprocal spaces with corrections for (i) the net polarization of the sample (the `surface term') due to a net dipole moment of the crystallographic unit cell (if present) and (ii) the short-range electron-density penetration effects. The rederived and reported closed-form expressions for all terms in the ES algorithm have been augmented by the expressions for the surface term available in the literature [Stenhammar, Trulsson & Linse (2011), J. Chem. Phys. 134, 224104] and the exact potential expressions reported in a previous study [Volkov, King, Coppens & Farrugia (2006), Acta Cryst. A62, 400-408]. The resulting algorithm, coded using Fortran in the XDPROP module of the software package XD, was tested on several small molecular crystal systems (formamide, benzene, L-dopa, paracetamol, amino acids etc.) and compared with a series of EP/MM-based direct-space summations (DS) performed within a certain number of unit cells generated along both the positive and negative crystallographic directions. The EP/MM-based ES technique allows for a noticeably more precise determination of the EF and EFG and significantly better precision of the evaluated ESP when compared with the DS calculations, even when the latter include contributions from an array of symmetry-equivalent atoms generated within four additional unit cells along each crystallographic direction. In terms of computational performance, the ES/EP/MM method is significantly faster than the DS calculations performed within the extended unit-cell limits but trails the DS calculations within the reduced summation ranges. Nonetheless, the described EP/MM-based ES algorithm is superior to the direct-space summations as it does not require the user to monitor continuously the convergence of the evaluated properties as a function of the summation limits and offers a better precision-performance balance.

Low-Voltage Flow-Through Electroporation Membrane and Method.

Electroporation uses high electric field gradients to create pores within the membrane of living cells in order to deliver a substance, for example a gene, into the cytoplasm. To achieve such gradients, current electroporation devices deliver voltage pulses in the kV range to the cell medium. We describe here a new device based on gold-microtube membranes that can accomplish electroporation with voltage pulses that are orders of magnitude smaller, 4 V. The percentages of electroporated bacteria were found to be more than an order of magnitude higher than obtained with a commercial electroporator.

Online sample clean-up and enrichment of proteins from salty media with dynamic double gradients on a paper fluidic channel.

Paper-based analytical device (PAD) has received more and more attention in the field of point-of-care test (POCT) due to its low cost, portability and simple operation. Sensitivity and selectivity are two important aspects in clinical diagnostic analysis. However, low sensitivity of a PAD limits its wider application for POCT. Here we introduced a PAD that can clean and enrich the protein content from salty media with both electric field (E) and pH gradient (double E/pH gradients), with which 100-fold enrichment effect could be achieved within 70 s as demonstrated by fluorescein isothiocyanate labeled bovine serum albumin (FITC-BSA) from artificial urine media. With post staining of the protein stacking band with bromophenol blue (BPB), selective colorimetric detection of human serum albumin (HSA) was achieved simply with smartphone camera in the clinically significant range of 10-300 mg‧L-1 (R2 = 0.99) with a limit of detection (LOD) of 4.9 mg‧L-1. Detection of microalbuminuria (MAU) of diabetic patients was demonstrated with this method without difference (ɑ = 0.01) to that by the clinical method (immunoturbidimetry). This work demonstrated the potential of this PAD method in online sample pretreatment and detection of target component from complex physiological samples.

Applications of heteronuclear NMR spectroscopy in biological and medicinal inorganic chemistry.

There is a wide range of potential applications of inorganic compounds, and metal coordination complexes in particular, in medicine but progress is hampered by a lack of methods to study their speciation. The biological activity of metal complexes is determined by the metal itself, its oxidation state, the types and number of coordinated ligands and their strength of binding, the geometry of the complex, redox potential and ligand exchange rates. For organic drugs a variety of readily observed spin I = 1/2 nuclei can be used (1H, 13C, 15N, 19F, 31P), but only a few metals fall into this category. Most are quadrupolar nuclei giving rise to broad lines with low detection sensitivity (for biological systems). However we show that, in some cases, heteronuclear NMR studies can provide new insights into the biological and medicinal chemistry of a range of elements and these data will stimulate further advances in this area.

Determination of hyperfine fields orientation in nuclear probe techniques.

One of the most popular nuclear probes, 57Fe is used for the investigation of orientations of hyperfine fields and also for the determination of other important properties. In particular, the orientation of iron magnetic moments can be unambiguously determined, including its signs. Experiments with polarized radiation are presented with regard to selected systems. Orientation of electric field gradient is used for acquiring information about the shape of the texture-free spectra. Applications on the analysis of iron-based superconductors are presented.

Extraordinary Light-Induced Local Angular Momentum near Metallic Nanoparticles.

The intense local field induced near metallic nanostructures provides strong enhancements for surface-enhanced spectroscopies, a major focus of plasmonics research over the past decade. Here we consider that plasmonic nanoparticles can also induce remarkably large electromagnetic field gradients near their surfaces. Sizeable field gradients can excite dipole-forbidden transitions in nearby atoms or molecules and provide unique spectroscopic fingerprinting for chemical and bimolecular sensing. Specifically, we investigate how the local field gradients near metallic nanostructures depend on geometry, polarization, and wavelength. We introduce the concept of the local angular momentum (LAM) vector as a useful figure of merit for the design of nanostructures that provide large field gradients. This quantity, based on integrated fields rather than field gradients, is particularly well-suited for optimization using numerical grid-based full wave electromagnetic simulations. The LAM vector has a more compact structure than the gradient matrix and can be straightforwardly associated with the angular momentum of the electromagnetic field incident on the plasmonic structures.

Polarization of core orbitals and computation of nuclear quadrupole coupling constants using Gaussian basis sets.

Most standard Gaussian basis sets for first row atoms, even large sets designed to converge on a 'complete basis set' limit, systematically overestimate the electric field gradient at nuclear sites for first row atoms, resulting in errors of up to 15% in the computation of nuclear quadrupole coupling constants. This error results from a failure to include tight d functions, which permit the core 1s orbitals to distort under the influence of the field of the nuclear quadrupole. Augmentation of standard basis sets with a single set of single-exponent d functions, matched to the reciprocal square of the nominal 1s radius, reduces these errors by up to 90%.

Does a Molecule-Specific Density Functional Give an Accurate Electron Density? The Challenging Case of the CuCl Electric Field Gradient.

In the framework of determining system-specific long-range corrected density functionals, the question is addressed whether such functionals, tuned to satisfy the condition -ε(HOMO) = IP or other energetic criteria, provide accurate electron densities. A nonempirical physically motivated two-dimensional tuning of range-separated hybrid functionals is proposed and applied to the particularly challenging case of a molecular property that depends directly on the ground-state density: the copper electric field gradient (EFG) in CuCl. From a continuous range of functional parametrizations that closely satisfy -ε(HOMO) = IP and the correct asymptotic behavior of the potential, the one that best fulfills the straight-line behavior of E(N), the energy as a function of a fractional electron number N, was found to provide the most accurate electron density as evidenced by calculated EFGs. The functional also performs well for related Cu systems.