Improvement of gelation properties of Penaeus vannamei surimi by magnetic field-assisted freezing in combination with curdlan.

Traditional methods of freezing and thawing may harm the quality of meat products. In order to reduce the negative impact of freezing on surimi products, the magnetic field-assisted freezing method is combined with various curdlan ratios to enhance the gelation characteristics of Penaeus vannamei surimi in this study. The results showed that the magnetic field-assisted freezing technique significantly improved the quality of thawed surimi compared with soaking freezing (SF), whereas the addition of curdlan further improved the gelation properties, and the gel strength, water-holding capacity, textural properties, whiteness, and G' value were significantly improved when its content was increased to 0.6 %. However, excessive amounts of curdlan interfered with protein covalent cross-linking, leading to a decrease in gel quality. Additionally, the addition of magnetic field and curdlan encouraged the shift of the α-helix to the random coil and ß-sheet transition, which stimulated the growth of myofibril molecules, exposed the hydrophobic groups and thiols, improved protein-molecule interactions, and promoted systematic gathering of proteins, leading to the formation of the microstructure of dense and small pores. It also resulted in a drop in water release, an increase in the proton density and a shift in the water condition from free water to more immobile water, which had higher sensory qualities. These effects together resulted in a reduction in thawing and cooking loss to 11.41 % and 13.83 %, respectively. These results also help to clarify the gelation process of shrimp surimi and help to regulate the gelation characteristics of shrimp surimi products.

Preparation and Mechanistic Exploration of Fermented Shrimp Surimi Gel Utilizing Enterococcus lactis S-15.

This study aimed to utilize Enterococcus lactis S-15 for the preparation of fermented shrimp gels. The gel properties and the gelation mechanism of proteins were investigated under acid-induced denaturation and protein degradation, and the quality of the gel was evaluated. Results showed that the pH of the shrimp surimi decreased from 7.35 to 4.74. The optimal gel strength observed at 24 h of fermentation was 326.41 g × cm, and disulfide bonds played a crucial role in the fermented gel. The fermented gel exhibited higher cooking loss rates and freeze-thaw loss rates compared to the heat-induced gel (control). However, fermented gels exhibited high overall acceptability both before and after cooking. The volatile basic nitrogen content in the fermented gel remained below 28.00 mg/100 g, within the safe range, and no histamine was detected. The results provide valuable data for the development and reprocessing of fermented shrimp surimi gel.

Investigation on 3D Printing of Shrimp Surimi Adding Three Edible Oils.

Three-dimensional (3D) printing provides a new method for innovative processing of shrimp surimi. However, there still exists a problem of uneven discharge during the 3D printing of surimi. The effects of different amounts of lard oil (LO), soybean oil (SO), and olive oil (OO) (0%, 2%, 4%, and 6%, respectively) added to shrimp surimi on the 3D printability of surimi were evaluated. The findings showed that with the increase in the added oil, the rheological properties, texture properties, water-holding capacity (WHC), and water distribution of surimi with the same kind of oil were significantly improved; the printing accuracy first increased and then decreased; and the printing stability showed an increasing trend (p < 0.05). The surimi with 4% oil had the highest printing adaptability (accuracy and stability). Different kinds of oil have different degrees of impact on the physical properties of surimi, thereby improving 3D-printing adaptability. Among all kinds of oil, LO had the best printing adaptability. In addition, according to various indicators and principal component analysis, adding 4% LO to shrimp surimi gave the best 3D-printing adaptability. But from the aspects of 3D printing properties and nutrition, adding 4% SO was more in line with the nutritional needs of contemporary people.

Investigation on 3D printing of shrimp surimi under different printing parameters and thermal processing conditions.

Improving the printing accuracy and stability of shrimp surimi and finding appropriate printing parameters and suitable thermal processing method can help to develop high value-added 3D printing products of shrimp surimi. It was found that in order to make the 3D printing products of shrimp surimi have higher printing adaptability (printing accuracy and printing stability reach more than 97%), by choosing nozzle diameter of 1.20 mm and setting the printing height of the nozzle to 2.00 mm, the layers of the printed products were better fused with each other, and the printing accuracy of the products could be greatly improved; there was no uneven discharge and filament breakage when the nozzle moved at the speed of 30 mm/s; and the products were internally compact and had good stability when the printing filling rate was 80%. In addition, the deformation rates of steamed, boiled and deep-fried shrimp surimi products were significantly higher than those of oven-baked and microwaved shrimp surimi products (P < 0.05). Microwave heating had a greater effect on the deformation and color of shrimp surimi products, and was not favored by the evaluators. In terms of deformation rate, sensory score, and textural characteristic, the oven-baked thermal processing method was selected to obtain higher sensory evaluation scores and lower deformation rates of shrimp surimi 3D printed products. In the future, DIY design can be carried out in 3D printing products of shrimp surimi to meet the needs of different groups of people for modern food.

Comparative investigation of various modification methods on Trachypenaeus Curvirostris surimi gel: Gelling properties, rheological behaviors and structure characteristics.

The aim of this study was to compare the investigations of various contents of egg white protein (2.0%-8.0%, EWP), microbial transglutaminase (0.1%-0.4%, MTGase), and konjac glucomannan (0.5%-2.0%, KGM) on the gelling properties and rheological behavior of Trachypenaeus Curvirostris shrimp surimi gel (SSG), and assessed the modification mechanisms through the analysis of structure characteristics. The findings suggested that all modified SSG samples (expect SSG-KGM2.0% ) had the higher gelling properties and the denser network structure than those of unmodified SSG. Meanwhile, EWP could give SSG a better appearance than MTGase and KGM. Rheological results showed that SSG-EWP6% and SSG-KGM1.0% had the highest G' and G″, demonstrating that the formation of higher levels of elasticity and hardness. All modifications could increase gelation rates of SSG along with the reduction of G″ during the degeneration of protein. According to the FTIR results, three modification methods changed SSG protein conformation with the increasing α-helix and ß-sheet contents and the decreasing of random coil content. LF-NMR results indicated that more free water could be transformed into immobilized water in the modified SSG gels, which contributed to improve the gelling properties. Furthermore, molecular forces showed that EWP and KGM could further increase the hydrogen bonds and hydrophobic interaction in SSG gels, while MTGase could induce the formation of more disulfide bonds. Thus, compared with another two modifications, EWP modified SSG gels showed the highest gelling properties.

Quantitative analysis of the correlation between gel strength and microstructure of shrimp surimi gel induced by dense phase carbon dioxide.

The impact of treatment pressure, temperature and time of DPCD on the Pacific White Shrimp (Litopenaeus vannamei) surimi gel properties was studied and compared with the conventional heat treatment. The gel strength, crosslinking degree, and microstructure of shrimp surimi gels were investigated. Quantitative microstructural characteristics were investigated to elucidate the changes in microstructure during the formation of gel induced by DPCD. With increased DPCD treatment setting conditions, the gel strength and crosslinking degree of shrimp surimi gel significantly improved (P < 0.05) with similar variation trends. Quantitative microstructural analysis revealed that the fractal dimension (Df) and the pore equivalent diameter of gel microstructure increased with the increase of DPCD treatment conditions. The lacunarity decreased and then increased, whereas pore number increased and decreased. According to the microstructural characteristics results, the surimi gel with 51.48 % degree of crosslinking induced at 25 MPa, 50˚C, and 60 min showed the most complex and homogeneous microstructure with the highest (Df), smaller lacunarity, an average pore equivalent diameter, and a larger pore number. The correlation analysis demonstrated that the crosslinking degree was strongly positively correlated with the gel strength. The Df, pore equivalent diameter and number of pores significantly positively correlated with the crosslinking degree, whereas the lacunarity strongly negatively correlated with the crosslinking degree. The present study showed that the DPCD treatment with a crosslinking degree of 51.48 % is the most optimum condition for better gel formation. The study could provide a theoretical basis for processing shrimp surimi with improved gel properties.

Dual regulations on texture and water mobility of shrimp surimi gel with sustained-release epigallocatechin-3-gallate in γ-cyclodextrin metal organic frameworks: Insights into functionality and mechanisms.

Epigallocatechin-3-gallate (EGCG) could demonstrate crosslinking effects on myofibrillar proteins, yet its proneness to self-aggregation could bring excessive crosslinking and water loss within gels, hindering its application as an additive during thermal gelation process. Here, encapsulation with the γ-cyclodextrin metal organic framework (γ-CD-MOF) before the use of EGCG was found to play a dual role: alleviating over-crosslinking of proteins and elevating water retention within gels. Results showed that EGCG got a sustainable release throughout the thermal process due to the gradual fracture of O-K coordinate bounds and structural collapse of γ-CD-MOF. Mechanism insights revealed that the use of EGCG loaded γ-CD-MOF (EGCG@γ-CD-MOF) could regulate formation efficiency on disulfide bounds and promote protonation transition of the amino groups in proteins. Moreover, EGCG@γ-CD-MOF brought a higher retention of phenols within gels through preventing oxidative transformation of phenols towards quinones, which were verified to display a higher affinity towards myosin via molecular calculations.

Insight into the Gel Properties of Antarctic Krill and Pacific White Shrimp Surimi Gels and the Feasibility of Polysaccharides as Texture Enhancers of Antarctic Krill Surimi Gels.

Antarctic krill is a potential and attractive resource for consumption. However, most Antarctic krill meat is used to produce primary products with low commercial value, with few highly processed products. This study aimed to evaluate and improve the gelling properties of Antarctic krill surimi, with Pacific white shrimp surimi as control. Compared with Pacific white shrimp surimi, the lower ß-sheet content and protein aggregation degree had a severe impact on the formation of the gel network of Antarctic krill surimi, which resulted in weaker breaking force, gel strength, and viscoelasticity (p < 0.05). Moreover, water retention capacity and molecular forces had a positive effect on the stability of the gel matrix of shrimp surimi. Thus, the high α-helix/ß-sheet ratio, weak intermolecular interactions, and low level of protein network cross-linkage were the main reasons for the poor quality of Antarctic krill surimi. On this basis, the effects of six polysaccharides on the texture properties of Antarctic krill surimi were studied. Chitosan, konjac glucomannan, sodium carboxyl methyl cellulose, and waxy maize starch resulted in no significant improvement in the texture properties of Antarctic krill surimi (p > 0.05). However, the addition of ι-carrageenan (2%) or κ-carrageenan (1~2%) is an effective way to improve the texture properties of Antarctic krill surimi (p < 0.05). These findings will contribute to the development of reconstituted Antarctic krill surimi products with high nutritional quality and the promotion of deep-processing products of Antarctic krill meat.

Effects of deheading and rinsing pretreatment on the quality of white leg shrimp (Litopenaeus vannamei) surimi based on endogenous proteases.

In this study, the effects of different pretreatments on the quality of white leg shrimp surimi were investigated based on shrimp endogenous proteases. The results showed that removing the head and rinsing significantly (P < 0.05) improved the gel strength, texture, whiteness, water distribution, and microstructure of the shrimp surimi gels. Headless shrimp surimi (HSS) had higher salt-soluble protein and lower water-soluble protein than whole shrimp surimi (WSS). The shrimp heads had high cathepsin B, L, D, and serine protease activities. Electrophoretic analysis revealed significant degradation of the myofibrillar proteins in the WSS during cold storage and thermal gelation. Moreover, the myosin heavy chains almost disappeared after thermal gelation, and new bands appeared at about 270 kDa and 100 kDa. However, rinsing reduced the endogenous proteases, water-soluble proteins, and concentrated salt-soluble proteins in the shrimp surimi; thus, the quality of the shrimp surimi gel improved after rinsing. These results suggest that the quality of the surimi gel was damaged by the endogenous proteases, and that removal of the shrimp heads and rinsing significantly (P < 0.05) improved the quality of the shrimp surimi gel. The gel properties of WSS were similar after the second rinse to those of unrinsed HSS. The choice of headless shrimp or whole shrimp as the raw material for production needs to be comprehensively considered according to the planned cost and the quality required for the shrimp surimi product. The recommended number of rinses is 1-2.

Ultrasonic pretreatment improves the gelation properties of low-salt Penaeus vannamei (Litopenaeus vannamei) surimi.

The effects of different ultrasonic pretreatments (120-600 W, 20 min; 360 W, 10-30 min) on the gel properties of shrimp surimi were investigated. Gel properties and protein functional properties were analysed to clarify the mechanism of action of ultrasound. The gel strength, water holding capacity and surface hydrophobicity of shrimp surimi gel increased initially and then decreased with the increase in ultrasound power or time, but the change in total sulfhydryl content showed the opposite trend, which indicated that proper ultrasound pretreatment could improve the gel properties of shrimp surimi, expand the protein to a greater extent and expose more SH groups and hydrophobic groups. According to scanning electron microscopy observation, ultrasound made shrimp surimi gel form a denser gel network. Fourier transform infrared analysis indicated that the α-helix content in shrimp surimi gel decreased initially and then increased with the increase of in ultrasound power or time, whereas the change in ß-sheet content showed the opposite trend. And the protein was the most stable in 360 W/20 min pretreatment. SDS-PAGE patterns showed that proper ultrasound inhibited the degradation of actin and troponin C. In addition, dynamic rheology illustrated that the G' values of the ultrasonic pretreatment group were higher than that of the control group, indicating that ultrasound could improve the elasticity and stability of shrimp surimi gel. The results suggested that the shrimp surimi gel pretreated by 360 W/20 min ultrasound showed the best gel properties. Furthermore, the correlation between the indexes affecting the properties of the gel was analyzed. This study provides a new technical means to improve the gel properties of shrimp surimi.

Astaxanthin Extract from Shrimp (Trachypenaeus curvirostris) By-Products Improves Quality of Ready-to-Cook Shrimp Surimi Products during Frozen Storage at -18 °C.

The effects of astaxanthin extract (AE) from shrimp by-products on the quality and sensory properties of ready-to-cook shrimp surimi products (RC-SSP) during frozen storage at −18 °C were investigated. Changes in 2-thiobarbituric acid reactive substances (TBARS) value, sulfhydryl groups, carbonyls, salt-soluble protein content, textural properties, color, and sensory quality over specific storage days were evaluated. The AE from shrimp by-products contained 4.49 µg/g tocopherol and 23.23 µg/g astaxanthin. The shrimp surimi products supplemented with 30 g/kg AE had higher redness values and greater overall acceptability and texture properties after cooking (p < 0.05). AE showed higher oxidative stability in RC-SSP than the control, as evidenced by lower TBARS and carbonyl content, and higher sulfhydryl and salt-soluble protein content. AE from shrimp by-products had positive effects on the antioxidant activity and color difference of RC-SSP, and could be used as a potential multifunctional additive for the development of shrimp surimi products.

Effects of ultrasonic-microwave combination treatment on the physicochemical, structure and gel properties of myofibrillar protein in Penaeus vannamei (Litopenaeus vannamei) surimi.

The objective of this study was to evaluate the effects of single ultrasound (360 W, 20 min), single microwave (10 W/g, 120 s) and ultrasonic-microwave combination treatment on shrimp surimi gel properties. The structure and physicochemical properties of myofibrillar protein (MP) were also determined. Low-field nuclear magnetic resonance showed that the fluidity of water molecules and the moisture content decreased, the stability and water holding capacity (WHC) increased after single ultrasound, single microwave and ultrasonic-microwave combination treatment. Compared with the traditional water bath treatment, ultrasound and microwave treatment reduced the total sulfhydryl content and promoted the formation of intermolecular disulfide bonds and hydrophobic interactions, which improved the compactness of the network structure of shrimp surimi gel. Moreover, Fourier transform infrared spectroscopy and sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis revealed that these treatments not only inhibited the degradation of MP, but also decreased the α-helix content and increased the ß-sheet content. The three treatments also significantly reduced the particle size and decreased the solubility of MP. Overall, the effect of ultrasonic-microwave combination treatment was superior to that of either single treatment.

Gelation Process Optimization of Shrimp Surimi Induced by Dense Phase Carbon Dioxide and Quality Evaluation of Gel.

Dense phase carbon dioxide (DPCD) is a new non-thermal method to induce surimi gel. However, the gel quality is affected by many factors, such as DPCD treatment time, temperature, and pressure, which makes it complicated to determine its operating parameters. Box-Behnken and backward linear regression were used to optimize the conditions (temperature, pressure, and treatment time) of DPCD-induced shrimp surimi gel formation, and a model between shrimp surimi gel strength and treatment conditions was developed and validated in the present study. Meanwhile, the heat-induced method was used as a control to analyze the effect of DPCD on the quality of shrimp surimi gel in the present study. The results showed that DPCD treatment affected the strength of shrimp surimi gel significantly, and the pressure of DPCD had the greatest influence on the gel strength of shrimp surimi, followed by time and temperature. When the processing pressure was 30 MPa, the temperature was 55 °C, and the treatment time was 60 min, the gel strength of the shrimp surimi was as high as 197.35 N·mm, which was not significantly different from the simulated value of 198.28 N mm (p > 0.05). The results of the gel quality properties showed that, compared with the heat-induced method, DPCD reduced the nutrient and quality loss of the shrimp surimi gel, and increased the gel strength and gel water-holding capacity. The results of low-field nuclear magnet resonance showed that DPCD increased the binding capacity of shrimp surimi to bound water and immobilized water, and reduced their losses. Gel microstructure further demonstrated that DPCD could improve shrimp surimi gelation properties, characterized by a finer and uniformly dense gel network structure. In summary, DPCD is a potential method for inducing shrimp surimi to form a suitable gel. The prediction model established in this study between DPCD treatment temperature, pressure, time, and gel strength can provide a reference for the production of shrimp surimi by DPCD.

Curcumin-mediated sono/photodynamic treatment preserved the quality of shrimp surimi and influenced its microbial community changes during refrigerated storage.

Shrimp surimi is widely acknowledged as a value-added shrimp product due to its delicious taste, rich flavor, and nutrition. However, the refrigerated shrimp surimi is prone to deterioration due to rapid microbial growth during storage. The present study sought to assess the effects of curcumin-mediated sono/photodynamic treatment on bacterial spoilage and shrimp surimi quality stored at 4 °C. The total viable count (TVC), microbiota composition, and quality parameters, including the total volatile basic nitrogen (TVB-N), thiobarbituric acid reactive substance (TBARs), and pH were investigated. The results showed that the spoilage bacteria in shrimp surimi rapidly increased with a surge on day 2 during refrigeration storage. The Psychrobacter and Brochothrix were identified as the Specific Spoilage Organisms (SSOs), which were also positively correlated with TVB-N and TBARs. The results further elucidated that the sono/photodynamic treatment could significantly inhibit the growth of SSOs on the surface and interior of shrimp surimi and delay shrimp surimi quality deterioration. In conclusion, the sono/photodynamic treatment as a non-thermal sterilization method could be a reliable and potential method for inactivating spoilage microorganisms and preserving shrimp surimi quality.

The relationship between rheological and textural properties of shrimp surimi adding starch and 3D printability based on principal component analysis.

The three-dimensional (3D) printing properties of pure shrimp surimi are poor and require improvement via the addition of other materials. The effects of the different amounts of potato starch, corn starch, tapioca starch, and cross-linked starch (CLS) (0%, 3%, 6%, or 9%, respectively) on the 3D printing properties and material properties of white shrimp (Litopenaeus vannamei) surimi were evaluated in the present study. The results showed that the apparent viscosity, G', and G'' of the samples were increased by adding 6% CLS, making it easy to extrude the sample from the nozzle and resulting in an improvement in the printing accuracy. In addition, after adding 6% CLS, the hardness, adhesiveness, and springiness of the sample were increased, which assist with maintaining the shape of the printed material and improve the printing stability of the sample. Moreover, the water holding capacity of shrimp surimi increased as a result of the addition of 6% CLS. In summary, 6% CLS can improve the material properties of shrimp surimi and make it more suitable for 3D printing.

Changes in the myosin secondary structure and shrimp surimi gel strength induced by dense phase carbon dioxide.

Dense phase carbon dioxide (DPCD) could induce protein conformation changes. Myosin and shrimp surimi from Litopenaeus vannamei were treated with DPCD at 5-25MPa and 40-60°C for 20min. Myosin secondary structure was investigated by circular dichroism and shrimp surimi gel strength was determined using textural analysis to develop correlations between them. DPCD had a greater effect on secondary structure and gel strength than heating. With increasing pressure and temperature, the α-helix content of DPCD-treated myosin decreased, while the ß-sheet, ß-turn and random coil contents increased, and the shrimp surimi gel strength increased. The α-helix content was negatively correlated with gel strength, while the ß-sheet, ß-turn and random coil contents were positively correlated with gel strength. Therefore, when DPCD induced myosin to form a gel, the α-helix of myosin was unfolded and gradually converted to a ß-sheet. Such transformations led to protein-protein interactions and cross-linking, which formed a three-dimensional network to enhance the gel strength.