ABSTRACT
Organic memristors based on covalent organic frameworks (COFs) exhibit significant potential for future neuromorphic computing applications. The preparation of high-quality COF nanosheets through appropriate structural design and building block selection is critical for the enhancement of memristor performance. In this study, a novel room-temperature single-phase method was used to synthesize Ta-Cu3 COF, which contains two redox-active units: trinuclear copper and triphenylamine. The resultant COF nanosheets were dispersed through acid-assisted exfoliation and subsequently spin-coated to fabricate a high-quality COF film on an indium tin oxide (ITO) substrate. The synergistic effect of the dual redox-active centers in the COF film, combined with its distinct crystallinity, significantly reduces the redox energy barrier, enabling the efficient modulation of 128 non-volatile conductive states in the Al/Ta-Cu3 COF/ITO memristor. Utilizing a convolutional neural network (CNN) based on these 128 conductance states, image recognition for ten representative campus landmarks was successfully executed, achieving a high recognition accuracy of 95.13% after 25 training epochs. Compared to devices based on binary conductance states, the memristor with 128 conductance states exhibits a 45.56% improvement in recognition accuracy and significantly enhances the efficiency of neuromorphic computing.
ABSTRACT
We demonstrate a lithium (Li) imbued TiOx iontronic device that exhibits synapse-like short-term plasticity behavior without requiring a forming process beforehand or a compliance current during switching. A solid-state electrolyte lithium phosphorus oxynitride (LiPON) behaves as the ion source, and the embedding and releasing of Li ions inside the cathodic like TiOx renders volatile conductance responses from the device and offers a natural platform for hardware simulating neuron functionalities. Besides, these devices possess high uniformity and great endurance as no conductive filaments are present. Different short-term pulse-based phenomena, including paired pulse facilitation, post-tetanic potentiation, and spike rate-dependent plasticity, were observed with self-relaxation characteristics. Based on the voltage excitation period, the time scale of the volatile memory can be tuned. Temperature measurement reveals the ion displacement-induced conductance channels become frozen below 220 K. In addition, the volatile analog devices can be configured into nonvolatile memory units with multibit storage capabilities after an electroforming process. Therefore, on the same platform, we can configure volatile units as nonlinear dynamic reservoirs for performing neuromorphic training and the nonvolatile units as the weight storage layer. We proceed to use voice recognition as an example with the tunable time constant relationship and obtain 94.4% accuracy with a minimal training data set. Thus, this iontronic platform can effectively process and update temporal information for reservoir and neuromorphic computing paradigms.
ABSTRACT
Hydrogels find widespread applications in biomedicine because of their outstanding biocompatibility, biodegradability, and tunable material properties. Hydrogels can be chemically functionalized or reinforced to respond to physical or chemical stimulation, which opens up new possibilities in the emerging field of intelligent bioelectronics. Here, the state-of-the-art in functional hydrogel-based transistors and memristors is reviewed as potential artificial synapses. Within these systems, hydrogels can serve as semisolid dielectric electrolytes in transistors and as switching layers in memristors. These synaptic devices with volatile and non-volatile resistive switching show good adaptability to external stimuli for short-term and long-term synaptic memory effects, some of which are integrated into synaptic arrays as artificial neurons; although, there are discrepancies in switching performance and efficacy. By comparing different hydrogels and their respective properties, an outlook is provided on a new range of biocompatible, environment-friendly, and sustainable neuromorphic hardware. How potential energy-efficient information storage and processing can be achieved using artificial neural networks with brain-inspired architecture for neuromorphic computing is described. The development of hydrogel-based artificial synapses can significantly impact the fields of neuromorphic bionics, biometrics, and biosensing.
ABSTRACT
Aluminum Scandium Nitride (Al1-xScxN) has received attention for its exceptional ferroelectric properties, whereas the fundamental mechanism determining its dynamic response and reliability remains elusive. In this work, an unreported nucleation-based polarization switching mechanism in Al0.7Sc0.3N (AlScN) is unveiled, driven by its intrinsic ferroelectricity rooted in the ionic displacement. Fast polarization switching, characterized by a remarkably low characteristic time of 0.00183 ps, is captured, and effectively simulated using a nucleation-limited switching (NLS) model, where the profound effect of defects on the nucleation and domain propagation is systematically studied. These findings are further integrated into Monte Carlo simulations to unravel the influence of the activation energy for ferroelectric switching on the distributions of switching thresholds. The long-term reliability of devices is also confirmed by time-dependent dielectric breakdown (TDDB) measurements, and the effect of thickness scaling is discussed. Ferroelectric field-effect transistors (FeFETs) are demonstrated through the integration of AlScN and 2D MoS2 channel, where biological synaptic functions can be emulated with optimized operation voltage. The artificial neural network built from AlScN-based FeFETs achieves 93.8% recognition accuracy of handwritten digits, demonstrating the potential of ferroelectric AlScN in future neuromorphic computing applications.
ABSTRACT
Functionally diverse devices with artificial neuron and synapse properties are critical for neuromorphic systems. We present a two-terminal artificial leaky-integrate-fire (LIF) neuron based on 6 nm Hf0.1Zr0.9O2 (HZO) antiferroelectric (AFE) thin films and develop a synaptic device through work function (WF) engineering. LIF neuron characteristics, including integration, firing, and leakage, are achieved in W/HZO/W devices due to the accumulated polarization and spontaneous depolarization of AFE HZO films. By engineering the top electrode with asymmetric WFs, we found that Au/Ti/HZO/W devices exhibit synaptic weight plasticity, such as paired-pulse facilitation and long-term potentiation/depression, achieving >90% accuracy in digit recognition within constructed artificial neural network systems. These findings suggest that AFE HZO capacitor-based neurons and WF-engineered artificial synapses hold promise for constructing efficient spiking neuron networks and artificial neural networks, thereby advancing neuromorphic computing applications based on emerging AFE HZO devices.
ABSTRACT
Recent trends have shown that autonomous agents, such as Autonomous Ground Vehicles (AGVs), Unmanned Aerial Vehicles (UAVs), and mobile robots, effectively improve human productivity in solving diverse tasks. However, since these agents are typically powered by portable batteries, they require extremely low power/energy consumption to operate in a long lifespan. To solve this challenge, neuromorphic computing has emerged as a promising solution, where bio-inspired Spiking Neural Networks (SNNs) use spikes from event-based cameras or data conversion pre-processing to perform sparse computations efficiently. However, the studies of SNN deployments for autonomous agents are still at an early stage. Hence, the optimization stages for enabling efficient embodied SNN deployments for autonomous agents have not been defined systematically. Toward this, we propose a novel framework called SNN4Agents that consists of a set of optimization techniques for designing energy-efficient embodied SNNs targeting autonomous agent applications. Our SNN4Agents employs weight quantization, timestep reduction, and attention window reduction to jointly improve the energy efficiency, reduce the memory footprint, optimize the processing latency, while maintaining high accuracy. In the evaluation, we investigate use cases of event-based car recognition, and explore the trade-offs among accuracy, latency, memory, and energy consumption. The experimental results show that our proposed framework can maintain high accuracy (i.e., 84.12% accuracy) with 68.75% memory saving, 3.58x speed-up, and 4.03x energy efficiency improvement as compared to the state-of-the-art work for the NCARS dataset. In this manner, our SNN4Agents framework paves the way toward enabling energy-efficient embodied SNN deployments for autonomous agents.
ABSTRACT
Neuromorphic computing seeks to replicate the capabilities of parallel processing, progressive learning, and inference while retaining low power consumption by drawing inspiration from the human brain. By further overcoming the constraints imposed by the traditional von Neumann architecture, this innovative approach has the potential to revolutionize modern computing systems. Memristors have emerged as a solution to implement neuromorphic computing in hardware, with research based on developing functional materials for resistive switching performance enhancement. Recently, two-dimensional MXenes, a family of transition metal carbides, nitrides, and carbonitrides, have begun to be integrated into these devices to achieve synaptic emulation. MXene-based memristors have already demonstrated diverse neuromorphic characteristics while enhancing the stability and reducing power consumption. The possibility of changing the physicochemical properties through modifications of the surface terminations, bandgap, interlayer spacing, and oxidation for each existing MXene makes them very promising. Here, recent advancements in MXene synthesis, device fabrication, and characterization of MXene-based neuromorphic artificial synapses are discussed. Then, we focus on understanding the resistive switching mechanisms and how they connect with theoretical and experimental data, along with the innovations made during the fabrication process. Additionally, we provide an in-depth review of the neuromorphic performance, making a connection with the resistive switching mechanism, along with a compendium of each relevant performance factor for nonvolatile and volatile applications. Finally, we state the remaining challenges in MXene-based devices for artificial synapses and the next steps that could be taken for future development.
ABSTRACT
During the operation of synaptic devices based on traditional conductive filament (CF) models, the formation and dissolution of CFs are usually uncertain. Moreover, when the device is operated for a long time, the CFs may dissolve due to both the Joule heat generated by the device itself and the thermal coupling between the devices. These problems seriously reduce the reliability and stability of the synaptic device. Here, an artificial synapse device based on polyimide-molybdenum disulfide quantum dot (MoS2 QD) nanocomposites is presented. Research has shown that MoS2 QDs doped into the active layer can effectively induce the reduction of Ag ions into Ag atoms, leading to the formation of Ag clusters and thereby achieving control over the growth of the CFs. Therefore, the device is capable of stably realizing various basic synaptic functions. Moreover, the long-term potentiation/long-term depression (LTP/LTD) of this device shows good linearity. In addition, due to the change in the shape of the CFs, the highly integrated devices with a three-dimensional (3D) stacked structure can operate normally even in a high-temperature environment of 110 °C. Finally, the synaptic characteristics of the devices on learning and inference tests show that their recognition rates are approximately 90.75% (room temperature) and 90.63% (110 °C).
ABSTRACT
Antiferromagnets (AFMs) are ideal materials to boost neuromorphic computing toward the ultrahigh speed and ultracompact integration regime. However, developing a suitable AFM neuromorphic memory remains an aspirational but challenging goal. In this work, we construct such a memory based on the CoO/Pt heterostructure, in which the collinear insulating AFM CoO shows a strong perpendicular anisotropy facilitating its electrical readout and writing. Utilizing the unique nonlinear response and bipolar fading memory properties of the device, we demonstrate a multidimensional reservoir computing beyond the traditional binary paradigm. These results are expected to pave the way toward next-generation fast and massive neuromorphic computing.
ABSTRACT
Threshold switching (TS) memristors are promising candidates for artificial neurons in neuromorphic systems. However, they often lack biological plausibility, typically functioning solely in an excitation mode. The absence of an inhibitory mode limits neurons' ability to synergistically process both excitatory and inhibitory synaptic signals. To address this limitation, we propose a novel memristive neuron capable of operating in both excitation and inhibition modes. The memristor's threshold voltage can be reversibly tuned using voltages of different polarities because of its bipolar TS behavior, enabling the device to function as an electronically reconfigurable bi-mode neuron. A variety of neuronal activities such as all-or-nothing behavior and tunable firing probability are mimicked under both excitatory and inhibitory stimuli. Furthermore, we develop a self-adaptive neuromorphic vision sensor based on bi-mode neurons, demonstrating effective object recognition in varied lighting conditions. Thus, our bi-mode neuron offers a versatile platform for constructing neuromorphic systems with rich functionality.
ABSTRACT
The processing of multicolor noisy images in visual neuromorphic devices requires selective absorption at specific wavelengths; however, it is difficult to achieve this because the spectral absorption range of the device is affected by the type of material. Surprisingly, the absorption range of perovskite materials can be adjusted by doping. Herein, a CdCl2 co-doped CsPbBr3 nanocrystal-based photosensitive synaptic transistor (PST) is reported. By decreasing the doping concentration, the response of the PST to short-wavelength light is gradually enhanced, and even weak light of 40 µW·cm-2 can be detected. Benefiting from the excellent color selectivity of the PST device, the device array is applied to feature extraction of target blue items and removal of red and green noise, which results in the recognition accuracy of 95% for the noisy MNIST data set. This work provides new ideas for the application of novel transistors integrating sensors and storage computing.
ABSTRACT
Neuromorphic computing promises an energy-efficient alternative to traditional digital processors in handling data-heavy tasks, primarily driven by the development of both volatile (neuronal) and nonvolatile (synaptic) resistive switches or memristors. However, despite their energy efficiency, memristor-based technologies presently lack functional tunability, thus limiting their competitiveness with arbitrarily programmable (general purpose) digital computers. This work introduces a two-terminal bilayer memristor, which can be tuned among neuronal, synaptic, and hybrid behaviors. The varying behaviors are accessed via facile control over the filament formed within the memristor, enabled by the interplay between the two active ionic species (oxygen vacancies and metal cations). This solution is unlike single-species ion migration employed in most other memristors, which makes their behavior difficult to control. By reconfiguring a single crossbar array of hybrid memristors, two different applications that usually require distinct types of devices are demonstrated - reprogrammable heterogeneous reservoir computing and arbitrary non-Euclidean graph networks. Thus, this work outlines a potential path toward functionally reconfigurable postdigital computers.
ABSTRACT
Organic material-based bioelectronic nonvolatile memory devices have recently received a lot of attention due to their environmental compatibility, simple fabrication recipe, preferred scalability, low cost, low power consumption, and numerous additional advantages. Resistive random-access memory (RRAM) devices work on the principle of resistive switching, which has the potential for applications in memory storage and neuromorphic computing. Here, natural organically grown orange peel was used to extract biocompatible pectin to design a resistive switching-based memory device of the structure Ag/Pectin/Indium tin oxide (ITO), and the behavior was studied between a temperature range of 10K and 300K. The microscopic characterization revealed the texture of the surface and thickness of the layers. The memristive current-voltage characteristics performed over 1000 consecutive cycles of repeated switching revealed sustainable bipolar resistive switching behavior with a high ON/OFF ratio. The underlying principle of Resistive Switching behavior is based on the formation of conductive filaments between the electrodes, which is explained in this work. Further, we have also designed a 2 × 2 crossbar array of RRAM devices to demonstrate various logic circuit operations useful for neuromorphic computing. The robust switching characteristics suggest possible uses of such devices for the design of ecofriendly bioelectronic memory applications and in-memory computing.
ABSTRACT
Introduction: Great knowledge was gained about the computational substrate of the brain, but the way in which components and entities interact to perform information processing still remains a secret. Complex and large-scale network models have been developed to unveil processes at the ensemble level taking place over a large range of timescales. They challenge any kind of simulation platform, so that efficient implementations need to be developed that gain from focusing on a set of relevant models. With increasing network sizes imposed by these models, low latency inter-node communication becomes a critical aspect. This situation is even accentuated, if slow processes like learning should be covered, that require faster than real-time simulation. Methods: Therefore, this article presents two simulation frameworks, in which network-on-chip simulators are interfaced with the neuroscientific development environment NEST. This combination yields network traffic that is directly defined by the relevant neural network models and used to steer the network-on-chip simulations. As one of the outcomes, instructive statistics on network latencies are obtained. Since time stamps of different granularity are used by the simulators, a conversion is required that can be exploited to emulate an intended acceleration factor. Results: By application of the frameworks to scaled versions of the cortical microcircuit model-selected because of its unique properties as well as challenging demands-performance curves, latency, and traffic distributions could be determined. Discussion: The distinct characteristic of the second framework is its tree-based source-address driven multicast support, which, in connection with the torus topology, always led to the best results. Although currently biased by some inherent assumptions of the network-on-chip simulators, the results suit well to those of previous work dealing with node internals and suggesting accelerated simulations to be in reach.
ABSTRACT
Fluorine-containing 2D polymer (F-2DP) film is a desired system to regulate the charge transport in organic electronics but rather rarely reports due to the limited fluorine-containing building blocks and difficulties in synthesis. Herein, a novel polar molecule with antiparallel columnar stacking is synthesized and further embedded into an F-2DP system to control over the crystallinity of F-2DP film through self-complementary π-electronic forces. The donor-accepter-accepter'-donor' (D-A-A'-D') structure regulates the charge transportation efficiently, inducing multilevel memory behavior through stepwise charge capture and transfer processes. Thus, the device exhibits ternary memory behavior with low threshold voltage (Vth1 of 1.1 V, Vth2 of 2.0 V), clearly distinguishable resistance states (1:102:104) and ternary yield (83%). Furthermore, the stepwise formation of the charge complex endows the device with a wider range to regulate the conductive state, which allows its application in brain-inspired neuromorphic computing. Modified National Institute of Standards and Technology recognition can reach an accuracy of 86%, showing great potential in neuromorphic computing applications in the post-Moore era.
ABSTRACT
Photoelectric artificial synapses based on memristors is an effective method to realize neuromorphic computation. This study presents an optoelectronic responsive artificial synapse made of a composite material consisting of gelatin and carbon nanotubes. The memristor demonstrates characteristics of analog resistive switching, the ability to store multiple memory states, and impressive retention properties. It has the capability to induce an excitatory post-synaptic current by means of electrical pulses or pulsed light exposure. The excitatory post-synaptic current can be modulated by the number, amplitude and interval of electrical pulses, as well as the action time, interval and light intensity of optical pulses. The artificial synapse showcases the emulation of fundamental Hebbian learning protocols, including spike timing dependent plasticity and spike amplitude dependent plasticity. In addition, the charge transfer in the carbon nanotube gelatin composite optoelectronic memristor is investigated through first-principles calculations, shedding light on its operational mechanism. Experimental results show that these devices have the potential to be utilized for processing image information, resulting in a significant reduction of input data and training expenses when recognizing handwritten numbers. Overall, the optoelectronic synapse exhibits promising image processing prospects in the field of neuromorphic computing.
ABSTRACT
Brain-inspired flexible neuromorphic devices are of great significance for next-generation high-efficiency wearable sensing and computing systems. In this paper, we propose a flexible organic electrochemical transistor using poly[(bithiophene)-alternate-(2,5-di(2-octyldodecyl)- 3,6-di(thienyl)-pyrrolyl pyrrolidone)] (DPPT-TT) as the organic semiconductor and poly(methyl methacrylate) (PMMA)/LiClO4 solid-state electrolyte as the gate dielectric layer. Under gate voltage modulation, an electric double layer (EDL) forms between the dielectric layer and the channel, allowing the device to operate at low voltages. Furthermore, by leveraging the double layer effect and electrochemical doping within the device, we successfully mimic various synaptic behaviors, including excitatory post-synaptic currents (EPSC), paired-pulse facilitation (PPF), high-pass filtering characteristics, transitions from short-term plasticity (STP) to long-term plasticity (LTP), and demonstrate its image recognition and storage capabilities in a 3 × 3 array. Importantly, the device's electrical performance remains stable even after bending, achieving ultra-low-power consumption of 2.08 fJ per synaptic event at -0.001 V. This research may contribute to the development of ultra-low-power neuromorphic computing, biomimetic robotics, and artificial intelligence.
ABSTRACT
In the dynamic landscape of Artificial Intelligence (AI), two notable phenomena are becoming predominant: the exponential growth of large AI model sizes and the explosion of massive amount of data. Meanwhile, scientific research such as quantum computing and protein synthesis increasingly demand higher computing capacities. As the Moore's Law approaches its terminus, there is an urgent need for alternative computing paradigms that satisfy this growing computing demand and break through the barrier of the von Neumann model. Neuromorphic computing, inspired by the mechanism and functionality of human brains, uses physical artificial neurons to do computations and is drawing widespread attention. This review studies the expansion of optoelectronic devices on photonic integration platforms that has led to significant growth in photonic computing, where photonic integrated circuits (PICs) have enabled ultrafast artificial neural networks (ANN) with sub-nanosecond latencies, low heat dissipation, and high parallelism. In particular, various technologies and devices employed in neuromorphic photonic AI accelerators, spanning from traditional optics to PCSEL lasers are examined. Lastly, it is recognized that existing neuromorphic technologies encounter obstacles in meeting the peta-level computing speed and energy efficiency threshold, and potential approaches in new devices, fabrication, materials, and integration to drive innovation are also explored. As the current challenges and barriers in cost, scalability, footprint, and computing capacity are resolved one-by-one, photonic neuromorphic systems are bound to co-exist with, if not replace, conventional electronic computers and transform the landscape of AI and scientific computing in the foreseeable future.
ABSTRACT
Reconfigurable neuromorphic computing holds promise for advancing energy-efficient neural network implementation and functional versatility. Previous work has focused on emulating specific neural functions rather than an integrated approach. We propose an all two-dimensional (2D) material-based heterostructure capable of performing multiple neuromorphic operations by reconfiguring output terminals in response to stimuli. Specifically, our device can synergistically emulate the key neural elements of the synapse, neuron, and dendrite, which play important and interrelated roles in information processing. Dendrites, the branches that receive and transmit presynaptic action potentials, possess the ability to nonlinearly integrate and filter incoming signals. The proposed heterostructure allows reconfiguration between different operation modes, demonstrating its potential for diverse computing tasks. As a proof of concept, we show that the device can perform basic Boolean logic functions. This highlights its applicability to complex neural-network-based information processing problems. Our integrated neuromorphic approach may advance the development of versatile, low-power neuromorphic hardware.
ABSTRACT
In this era of artificial intelligence and Internet of Things, emerging new computing paradigms such as in-sensor and in-memory computing call for both structurally simple and multifunctional memory devices. Although emerging two-dimensional (2D) memory devices provide promising solutions, the most reported devices either suffer from single functionalities or structural complexity. Here, this work reports a reconfigurable memory device (RMD) based on MoS2/CuInP2S6 heterostructure, which integrates the defect engineering-enabled interlayer defects and the ferroelectric polarization in CuInP2S6, to realize a simplified structure device for all-in-one sensing, memory and computing. The plasma treatment-induced defect engineering of the CuInP2S6 nanosheet effectively increases the interlayer defect density, which significantly enhances the charge-trapping ability in synergy with ferroelectric properties. The reported device not only can serve as a non-volatile electronic memory device, but also can be reconfigured into optoelectronic memory mode or synaptic mode after controlling the ferroelectric polarization states in CuInP2S6. When operated in optoelectronic memory mode, the all-in-one RMD could diagnose ophthalmic disease by segmenting vasculature within biological retinas. On the other hand, operating as an optoelectronic synapse, this work showcases in-sensor reservoir computing for gesture recognition with high energy efficiency.