Prediction of lamb meat eating quality in two divergent breeds using various live animal and carcass measurements.

This study investigated how accurately taste panel sensory assessments of meat eating quality (MEQ) could be predicted in two divergent lamb breeds, using predictors measured in live animals (weights, subjective conformation assessments, ultrasound, computed tomography (CT) and video image analysis measurements) and carcasses (weights, MLC fat and conformation classes, pH, temperature, carcass dimensions and cross-sectional tissue dimensions), individually and in optimal combinations. Grilled muscle samples from the pelvic limb (semimembranosus) and loin (Longissimus lumborum) of 120 Texel (TEX) and 112 Scottish Blackface (SBF) lambs were assessed by a trained taste panel for texture, juiciness, flavour, abnormal flavour and overall liking. Residual correlations (adjusted for fixed effects, age and sire) between MEQ and predictor traits were low to moderate in size (<±0.42). MEQ traits predicted best by single measurements were loin flavour and overall liking for TEX (using fat area in a CT scan or subcutaneous fat depth measured post-mortem), and for SBF were leg texture (using carcass weight or temperature) and juiciness (using CT fat area or shoulder conformation score). Combining live animal and carcass measurements increased MEQ prediction accuracies, compared with using either set alone, to explain >40% of residual variation in several MEQ traits, with the highest adjusted R(2) values for leg juiciness in TEX (0.53) and leg texture in SBF (0.59). The most useful predictors of MEQ depended on breed, with measurements of fatness generally more important in the lean breed and carcass size and muscling more important in the fatter breed.

Muscle fibre characteristics of two contrasting sheep breeds: Scottish Blackface and Texel.

This study evaluates the effects of breed and sex, together with those of birth weight and litter size, on muscle fibre type characteristics in Texel (TEX) and Scottish Blackface sheep (SBF). The M.longissimus thoracis et lumborum (LTL) of TEX had a significantly higher total muscle cross-sectional area (16%), a higher total fibre number (20%) and a higher muscle CT density (5%) than the SBF but had a similar average muscle fibre size. The frequency of slow fibres in the LTL in TEX was lower than in SBF (7.5% vs. 9.6%). Muscle fibre histochemistry similarly demonstrated that the oxidative fibre frequency in TEX was 10% lower than in SBF. The inter-fibre lipid content in TEX was also significantly lower than in SBF. Correspondingly, TEX displayed higher frequency (91.7% vs. 90.9% in SBF) and higher relative total area (92.5% vs. 90.4% in SBF) of fast fibres. These breed differences in muscle fibre traits indicate underlying genetic variation, and future analyses will evaluate the link of these traits to meat quality and assess the usefulness of these traits in breeding programmes.

Muscularity and eating quality of lambs: Effects of breed, sex and selection of sires using muscularity measurements by computed tomography.

Differences in muscularity of the hind leg (HL) and lumbar region (LR) were investigated between sexes (ram vs ewe lambs), breeds (Scottish Blackface, SBF vs Texel, TEX) and progeny of high- and low-muscularity sires (HM, LM) (n=471). The influence of these factors on meat eating quality (MEQ) was also examined (n=229). TEX lambs had 16% greater muscularity than SBF in both regions, whilst differences between sire groups were 4%. Ewe lambs had slightly higher values of muscularity for the HL than rams, but values were similar for the LR. Meat from SBF lambs had higher tenderness, stronger lamb flavour and higher overall liking than TEX meat. Sex had a weak influence with ram lambs having a stronger abnormal flavour and lower overall liking in the LR only. No significant differences in MEQ were found between HM- and LM-sired lambs, suggesting that improvements in muscularity would not have unfavourable effects on MEQ.

The use of various live animal measurements to predict carcass and meat quality in two divergent lamb breeds.

Live weight, subjective scores of condition and conformation, live animal video image analysis (LVIA), ultrasound and X-ray computed tomography (CT) scanning were used to investigate the best method or combination of methods for predicting carcass and meat quality traits in live Texel and Scottish Blackface lambs. Predictors derived from CT alone accounted for a high proportion of the variance in dissected fat and muscle weight in Texel lambs (adjusted R(2)=∼0.8), as well as intra-muscular fat content in the loin (∼0.6), but lower proportions in Blackface lambs (∼0.7 for fat, 0.4-0.5 for muscle and intra-muscular fat), after adjusting for sire and fixed effects. Adding traits measured by other in vivo methods increased prediction accuracies (adjusted R(2)) by up to 0.26, depending on trait and data set. Shear force and ultimate pH could not be accurately predicted using the traits considered here (adjusted R(2)<0.4). Although the same methods tended to be best for predicting product quality traits between breeds, prediction accuracies differed.

Fat deposition, fatty acid composition and meat quality: A review.

This paper reviews the factors affecting the fatty acid composition of adipose tissue and muscle in pigs, sheep and cattle and shows that a major factor is the total amount of fat. The effects of fatty acid composition on meat quality are also reviewed. Pigs have high levels of polyunsaturated fatty acids (PUFA), including the long chain (C20-22) PUFA in adipose tissue and muscle. The full range of PUFA are also found in sheep adipose tissue and muscle whereas cattle 'conserve' long chain PUFA in muscle phospholipid. Linoleic acid (18:2n-6) is a major ingredient of feeds for all species. Its incorporation into adipose tissue and muscle in relation to the amount in the diet is greater than for other fatty acids. It is deposited in muscle phospholipid at a high level where it and its long chain products eg aracidonic acid (20:4n-6) compete well for insertion into phospholipid molecules. Its proportion in pig adipose tissue declines as fat deposition proceeds and is an index of fatness. The same inverse relationships are not seen in ruminant adipose tissue but in all species the proportion of 18:2n-6 declines in muscle as fat deposition increases. The main reason is that phospholipid, where 18:2n-6 is located, declines as a proportion of muscle lipid and the proportion of neutral lipid, with its higher content of saturated and monounsaturated fatty acids, increases. Oleic acid (18:1cis-9), formed from stearic acid (18:0) by the enzyme stearoyl Co-A desaturase, is a major component of neutral lipid and in ruminants the same enzyme forms conjugated linoleic acid (CLA), an important nutrient in human nutrition. Like 18:2n-6, α-linolenic acid (18:3n-3) is an essential fatty acid and is important to ruminants since it is the major fatty acid in grass. However it does not compete well for insertion into phospholipid compared with 18:2n-6 and its incorporation into adipose tissue and muscle is less efficient. Greater biohydrogenation of 18:3n-3 and a long rumen transit time for forage diets also limits the amount available for tissue uptake compared with 18:2n-6 from concentrate diets. A positive feature of grass feeding is that levels of the nutritionally important long chain n-3 PUFA are increased ie EPA (20:5n-3) and DHA (22:6n-3). Future research should focus on increasing n-3 PUFA proportions in lean carcasses and the use of biodiverse pastures and conservation processes which retain the benefits of fresh leafy grass offer opportunities to achieve this. The varying fatty acid compositions of adipose tissue and muscle have profound effects on meat quality. Fatty acid composition determines the firmness/oiliness of adipose tissue and the oxidative stability of muscle, which in turn affects flavour and muscle colour. Vitamin E is an essential nutrient, which stabilises PUFA and has a central role in meat quality, particularly in ruminants.

Prediction of sensory characteristics of lamb meat samples by near infrared reflectance spectroscopy.

This study was implemented to evaluate the potential of visible and near infrared reflectance (NIR) spectroscopy to predict sensory characteristics related to the eating quality of lamb meat samples. A total of 232 muscle samples from Texel and Scottish Blackface lambs was analyzed by chemical procedures and scored by assessors in a taste panel (TP). Then, these parameters were predicted from Vis/NIR spectra. The prediction equations showed that the absorbance data could explain a significant but relatively low proportion of the variability (R(2)<0.40) in the taste panel traits (texture, juiciness, flavour, abnormal flavour and overall liking) of the lamb meat samples. However, a top-tail approach, looking at the spectra of the 25 best and worst samples as judged by TP assessors, provided more meaningful results. This approach suggests that the assessors and the spectrophotometer were able to discriminate between the most extreme samples. This may have practical implications for sorting meat into a high quality class, which could be branded, into a low quality class sold for a lower price for less demanding food use. Regarding the chemical parameters, both intramuscular fat and water could be more accurately predicted by Vis/NIR spectra (R(2)=0.841 and 0.674, respectively) than sensory characteristics. In addition, the results obtained in the present study suggest that the more important regions of the spectra to estimate the sensory characteristics are related to the absorbance of these two chemical components in meat samples.

Accuracy of in vivo muscularity indices measured by computed tomography and their association with carcass quality in lambs.

Assessments of muscle mass and skeletal dimensions by Computed Tomography (CT) enable the development of new muscularity indices for the hind leg (HL) and lumbar region (LR) in lambs. Compared to previous CT muscularity indices, the accuracy was much higher with the new index in the HL (correlations between CT and dissection indices of 0.89 vs 0.51). The accurate measurement of femur length by CT used in the calculation of the new HL index made an important contribution to the higher accuracy of the index. The improvement in accuracy was smaller for the LR (0.55 vs 0.44). The association of CT muscularity indices and carcass quality in Texel and Scottish Blackface lambs showed that improved muscularity is not phenotypically correlated with detrimental effects on carcass composition. CT muscularity indices provide an alternative method to improve carcass conformation and leanness, using measurements that at a constant weight are independent of fatness.

Regional variation in the hedonic evaluation of lamb meat from diverse production systems by consumers in six European countries.

This paper describes the responses of consumers in six European countries (Greece, Italy, Spain, France, Iceland and United Kingdom) tasting meat from twelve different local types of lambs produced in those same six countries. Animals represented 10 breeds and crossbreeds, three sexes, several diets composed of either milk, concentrates and various forages as main ingredients and different slaughter ages, from 1 and 12 months, and carcass weights, from 5.5 to 30.4kg. Tests were conducted by 36 volunteer families in each of the six countries involved in the study. Families were asked to roast the joints using their own cooking criteria, evaluating (from "dislike extremely" to "like extremely") flavour, tenderness, juiciness and overall liking. Also the cook was asked to rate the odour during cooking. Country and lamb type and their interaction were statistically significant for all the variables analysed. Results suggest a link between the assessments of a given lamb type and the consumers' culinary background, showing clear associations between country and lamb type preferences. It was possible to separate, independently of the country, different groups of families with similar preferences. Five family groups, which included 88 families (40.74%), had a clear Mediterranean origin and preferred types of lamb fed either milk or mainly concentrate diets. Seven family groups, which included 93 families (43.06%) with a clear northern origin, preferred types reared on grass or with grass included in the diet. The rest of the groups (four) that included 35 families (16.20%) had no clear composition (northern or Mediterranean), and they had a wider taste preference. It can clearly be seen that there are two categories of consumers of lamb in the analysed European market: those who prefer "milk or concentrate taste" and those who prefer "grass taste".

The relationship between body dimensions of living pigs and their carcass composition.

The performance of a visual image analysis (VIA) system was tested with regards to its potential to determine in vivo carcass composition and conformation, either alone, or in conjunction with other in vivo measures such as live weight and backfat depth. Pigs of both sexes of a commercial type were reared and slaughtered at weights ranging from 50 to 120 kg. Feeding was ad libitum on diets ranging from 0.14 to 0.19 kgkg(-1) crude protein content to produce animals of a range of body condition. Two analyses were carried out: the first analysis addressed the relationship between dimensionless carcass and VIA indices; the second analysis assessed the relationship between carcass composition and VIA body shape using detrended carcass and VIA data, which were produced by removal of allometric growth trends. A statistically significant relationship (P<0.05) between in vivo VIA body size and shape and carcass muscle dimensions and composition was found for most body regions. Adjusted R(2) statistics ranged between 0.13 and 0.54 for relative fat weights and between 0.14 and 0.51 for relative lean weights. The predictive power of the regression models, indicated by R(2)-like statistics for prediction, was approximately 70% of the adjusted R(2) values. The descriptive and predictive powers of the corresponding models generally strengthened if VIA indices were combined with other in vivo measurements. The relationships between in vivo and carcass measures remained statistically significant (P<0.05) after removal of the growth trends, although adjusted R(2) statistics generally decreased. The predictive power of models corresponding to the detrended measures was, however, weak. The results show in vivo VIA measurements to be useful in the estimation of muscle size, carcass conformation and composition, all of which are of significant importance to the pig production, marketing and processing industries.

Transfer of spinal cord material to subsequent bovine carcasses at splitting.

During the slaughter process, cattle carcasses are split by sawing centrally down the vertebral column, resulting in contamination of each half with spinal cord material. Using a novel method based on a real-time PCR assay, we measured saw-mediated tissue transfer among carcasses. Up to 2.5% of the tissue recovered from each of the five subsequent carcasses by swabbing the split vertebral face came from the first carcass to be split; approximately 9 mg was spinal cord tissue. Under controlled conditions in an experimental abattoir, between 23 and 135 g of tissue accumulated in the saw after splitting five to eight carcasses. Of the total tissue recovered, between 10 and 15% originated from the first carcass, and between 7 and 61 mg was spinal cord tissue from the first carcass. At commercial plants in the United Kingdom, between 6 and 101 g of tissue was recovered from the saw, depending on the particular saw-washing procedure and number of carcasses processed. Therefore, if a carcass infected with bovine spongiform encephalopathy were to enter the slaughter line, the main risk of subsequent carcass contamination would come from the tissue debris that accumulates in the splitting saw. This work highlights the importance of effective saw cleaning and indicates that design modifications are required to minimize the accumulation of spinal cord tissue debris and, hence, the risk of cross-contamination of carcasses.

Weight loss from beef sides during storage post mortem and its effects on carcass composition.

The effects of storage on carcass weight, carcass composition and the water content of tissues have been investigated. Ten Friesian-cross steer carcasses were used, one side being dissected 1 day after slaughter and the other after storage at + 1°C and 84 % relative humidity for 20 days. The rate of weight loss from the sides (range in hot weight, 103·0 to 201·5 kg) was linear between days 1 and 20, with a mean loss of 4·2 kg (0·17 %/day). During the period of storage, there was a reduction in weight of all tissues except intermuscular fat (IMF) and fatter sides (range 14·72-32·23 % dissectible fat) had a proportionately smaller loss. In percentage composition terms, there was a significant reduction in subcutaneous fat (SCF)of 0·36 percentage units, P < 0·01, and in lean, of 0·59 percentage units, P < 0·05; there was a significant gain in IMF of 0·63 percentage units, P < 0·01, but it was considered that changes were not large enough to seriously affect the interpretations of dissection data in most experiments. During storage, all tissues except IMF lost water, particularly SCF, which lost 28 % of the original amount. In the day 1 sides, 35 % of the total loss from hot weight to recovered tissue weight (after dissection) occurred during jointing and dissection and 65 % during storage. In the day 20 sides, the values were 12 %, and 88 %, respectively.

Sensory assessment of fatness and conformation of beef steers.

Human judgement, based on looking, handling and experience, still plays an important part in choosing beef animals for various purposes. This paper describes an attempt at a scientific investigation of the method. Two groups of steers-(a) sixteen Aberdeen Angus and (b) thirty Herefords-were assessed by different panels of judges for fatness and conformation, regionally and overall. Repeat assessments were made on the group (a) animals. The carcasses were assessed by the same panels, then dissected into component tissues. On the basis of discrimination and consistency tests and correlation with dissection data a best panel was chosen for the group (a) animals. It was found that judges were very effective in ranking animals within the total sample but, contrary to intuitive ideas, the average score was better related to quantities of dissected tissues than the score of any individual, which makes the method more expensive than might be thought.

Estimating beef carcass composition using the speed of ultrasound.

The reciprocal of the speed of 2·25 MHz (nominal) ultrasound (RV) was measured at selected sites through the soft tissues of 72 beef carcasses from Friesian. Hereford and Hereford × Friesian bulls and steers at or within 1 h of stunning. The measurement sites were: through M. adductor horizontal to the caudal edge of the symphysis pubis (S2), through M. scalenus just cranial to the first rib (S3) and through M. longissimus thoracis between the tenth and eleventh ribs, approximately 6 cm from the midline (S4). The thickness of extractable lipid (d(f)) at each site was defined as the product ßd, where ß was the volume fraction of extractable lipid and d was the tissue thickness. The thickness of lipid-free tissue (d(ff)) was defined as (d-d(f)) and ß was calculated from the ultrasonic measurements using an empirical linear relation between ß and RV. When cold, the intact sides were scored independently for fatness and conformation by two experienced judges according to the EAAP system and their mean scores determined. Sides were split at the level of the last rib and the depth of subcutaneous fat measured at 25%, 50% and 75% of the width of M. longissimus thoracis from the midline. The three ultrasonic characteristics (RV, d(f) and d(ff)) at each site, the mean fat depth and the mean fat and conformation scores were examined for correlation with % fat and % lean in the sides determined by complete physical dissection. The best predictors of % fat were mean d(f) at S3 and S4, mean d(f) at S2, S3 and S4 and mean EAAP fat score which were all of comparable precision (rsd, respectively, 2·07, 2·06 and 2·08). The best predictors of % muscle were mean d(f) at S3 and S4, mean d(f) at S2, S3 and S4 and mean RV at S2, S3 and S4 (rsd, respectively, 1·79, 1·79 and 1·90). The corresponding residual standard deviations for mean EAAP fat score and mean fat depth were 2·18 and 2·20.

Effect of pelvic suspension on three major leg muscles in the pig carcass and implications for ham manufacture.

Thirty-two female pigs were slaughtered and their left sides suspended conventionally by the Achilles tendon whilst right sides were suspended from the pelvic bone. The first 16 pigs were used to measure suspension effects on the characteristics of three major leg muscles (m. gluteobiceps, m. semimembranosus and m. rectus femoris) and to assess their suitability for ham manufacture. The remaining pigs were used for the production of hams, made from tunnel- boned whole legs injected to a target 10% weight gain, then tumbled and cooked. Compared with conventional hanging, pelvic suspension resulted in significantly (P<0.01) lower weight loss from the sides during chilling (2.8 and 2.5%). There were major changes in the shape of all three muscles, with pelvic suspension producing marked increases in the width of the m. gluteobiceps (24%) and length of the m. semimembranosus (34%), and a small reduction in the length of the m. rectus femoris (2%). It also resulted in the two former muscles having a relatively higher brine retention, lower drip losses after storage and lower instrumental texture values (Volodkevitch shear force). Cooking loss was reduced in the pelvic-suspended m. semimembranosus. Similarly, whole gammon hams made from pelvic-suspended sides had greater injection gains than hams from conventionally-hung sides (13.6 and 12.3%), with lower cooking losses (16.7 and 19.0%). Instrumental texture values (punch and die peak force) made on the individual muscles in 3-mm thick slices were lower for the m. gluteobiceps (5914 and 9085 g) and m. semimembranosus (6163 and 7600 g) as a result of pelvic suspension. There were minor but significant effects on some colour parameters which probably have little commercial impact. The results demonstrate the advantages of pelvic suspension in terms of brine uptake and retention, and hence increased yield, as well as reduced toughness, for at least two of the major leg muscles, m. gluteobiceps and m. semimembranosus, with no disadvantage for the m. rectus femoris. Together, these three muscles constitute about half of the trimmed leg weight.

Relationships between beef carcass shape and muscle to bone ratio.

Relationships between muscularity and muscle to bone ratio were investigated for beef carcasses of several breeds and crosses, and three genders using data from Bristol and Alberta. Side dissection data in terms of muscle, fat and bone weights were used to calculate muscle to bone ratios (MtoB) and muscularity indexes (MUSC) for the whole side or for the region around the femur bone. Highly significant breed and gender effects on MtoB and MUSC were shown for both the Bristol and the Alberta data sets, but the group differences for MtoB were not the same as those for MUSC despite the fact that these two characteristics were closely correlated. For both sets of data, for example, MUSC values at a common muscle plus bone weight were significantly higher for carcasses of bulls than heifers, but similarly adjusted MtoB values were generally higher for carcasses of heifers than bulls. Differences among breed groups were mainly in a similar direction for MUSC and MtoB, but the size of the differences varied widely. For example, relative to the Friesian, the Jersey breed had a significantly higher MtoB but a significantly lower MUSC, and carcasses of double-muscled bulls had a femur-region MtoB that was 19.2% greater than that of a group of Shorthorn-cross carcasses, but a MUSC that was only 1.7% higher. These findings show that because of the inconsistent relationships between muscularity and muscle to bone ratio among different classes of beef carcasses, lean meat yield cannot always be predicted without bias if measures of carcass shape are used as indicators of muscle to bone ratio.

Progress towards using the speed of ultrasound for beef leanness classification.

Following the observation of a high correlation between the reciprocal of the speed of ultrasound and lean proportion in beef carcasses, commercial equipment (VOSI) was developed and its performance alongside a smaller assembly (Mini G) is reported. The speed of ultrasound was measured through six sites on beef carcasses within 1 h of stunning: three sites with VOSI and three sites with Mini G. Sides were also scored for fatness and conformation using the EAAP system, and subcutaneous fat depth was measured at 25,50 and 75% of the width of M. longissimus thoracis from the midline at the last rib. All sides were dissected into subcutaneous fat, intermuscular fat, muscle and bone. The reciprocal speed averaged over the three VOSI sites (RV346) was the best single predictor of the proportion of lean in the side. Multiple regression analyses, in predicting per cent lean, showed that addition of conformation score improved the precision of fat score and fat depth for a group of 26 sides. It did not provide a significant improvement over RV346. However, in another group of 50 sides showing more variation in side mass and conformation, conformation score did significantly improve RV346. The best prediction of per cent lean, involving RV346 and tissue thicknesses, gave a residual standard deviation of 1·35%, and conformation score did not significantly improve this regression.

Growth of carcass components and its relation with conformation in pigs of three types.

The growth of carcass tissues and developmental changes in tissue distribution were studied in three pig types which were selected to have morphologies that could be described as attenuated, blocky and flabby. These were achieved by incorporating, respectively, Landrace, Pietrain and Meishan genes to give commercial 'types' (designated L, P and M,) exhibiting some of the phenotypic qualities of these breeds. Twenty-five female pigs of each type with an average start weight of 27.2 kg were fed ad libitum and slaughtered over a (nominal) live weight range of 35-115 kg. Relations were quantified using the logarithmic transformation of data in the allometric model. Significant type differences in relative growth rates (the b coefficient or slope in the logarithmic plot) were not common, occurring in 14% of the relationships examined, whereas 61% of differences in the constant term (a or intercept in the logarithmic plot) were significant. Increase in carcass weight with age was not different between the types but in relation to slaughter live weight (dressing percentage) P had the highest value, M the lowest. Carcass dimensions showed that, relative to body length, P had the widest ham and shoulder over the whole size range whereas M had a deep (ventral-dorsal) shoulder and wide belly, attributes of shape that would be regarded as undesirable by the meat trade. Relative to carcass weight, L was only slightly longer (3 mm) in the body than M at the heavy end of the weight range but markedly longer (29 mm) than P. These differences in carcass conformation were also evident in the shape of pelvic limb muscles which, at a given length, were lightest and narrowest in M and, in some cases, heavier and wider in P than in L. Pelvic limb volume relative to limb length was greatest in P and least in M. Carcass composition (at a given prepared side weight) of P was characterized by low fat and high lean weights, and a high lean to bone ratio. Subcutaneous fat b was lowest in P, indicating that P was early maturing, but M carcasses had the most subcutaneous and intermuscular fat, also indicative of early maturing. There was, thus, no simple relation between maturity characteristics and carcass composition. M carcasses also had the greatest weight of skin. P had a light hindloin and heavy pelvic limb, M a heavy shoulder, hindloin and flank but a light pelvic limb; L had a light shoulder but a heavy foreloin. The distribution of individual tissues mirrored these differences in joint weights to a varying extent; in most cases the match (relatively heavy/light) was with a single tissue. These data, thus, indicated some pig type differences in tissue distribution and of particular significance was the relatively light lean mass in the pelvic limb of M. The results showed important differences in carcass quality between commercially available pig types differing in conformation.

Estimation of lamb carcass composition from measurements of the speed of ultrasound in the soft tissues of live animals and carcasses.

The application of the velocity of sound (VOS) technique to lamb carcasses in a previous study (Fisher & Page, 1986) measured composition at a hind limb and neck site but was not as precise as fat scores in predicting lean proportion. This study examines VOS measurements made at sites in the hind limbs and along the vertebral column in live sheep and carcasses. A group (A) comprising five breeds of males and females (n = 61) and a sub-group (B) of Scottish Blackface castrated males (n = 34) were studied, and the reciprocal velocity of ultrasound (RV) was measured on the live sheep immediately behind the shoulder and over the last rib using a fixed-distance transducer assembly operating at 5 MHz, and in the hind limbs at 2·25 MHz using the apparatus described by Miles et al. (1984). Corresponding measurements were made on the carcasses which were classified by a Meat and Livestock Commission fatstock officer and then dissected. Standard deviations of lean proportion were 4·48% (A) and 3·39% (B). The residual standard deviations (rsds) for groups A and B respectively were obtained using the following predictors: live mass (LM) 4·27% and 2·96%; LM + breed (B) 3·08% (group A only); LM + mean RV 2·36% and 2·07%; LM + B + mean RV 1·99% (group A only). Using carcass measurements: carcass mass (CM) 4·25% and 2·90%; CM + MLC fat score 2·99% and 2·12%; CM + RV last rib 2·89% and 2·02%. These data show that VOS measurements through dorsal sites of live sheep provide encouragingly precise estimates of carcass lean proportion. For carcasses, dorsal sites provide a less precise estimate of carcass lean but when carcass mass is included in multiple regression the precision of the correlation is comparable with that of multiple regression of fat score with carcass mass.

Fatty acid composition and eating quality of lamb types derived from four diverse breed × production systems.

Carcass composition, muscle fatty acids and eating quality of loin chops were examined in ram lambs from four diverse breed × production system groups: pure Welsh Mountain off upland flora, pure Soays off lowland grass, Suffolk crosses off lowland grass and Suffolk crosses off concentrates. The two Suffolk groups had heavier and better muscled carcasses than the others and Soays were particularly lean. Fatty acid composition was different between the groups. The forage-fed lambs all had high concentrations of n-3 polyunsaturated fatty acids (PUFA) including 18:3 (α-linolenic acid) and 20:5 (eicosapentaenoic acid) compared with Suffolks-concentrates which had high concentrations of the n-6 PUFA 18:2 (linoleic acid) and 20:4 (arachidonic acid). Soays were high in both n-3 and n-6 PUFA. Flavour characteristics in grilled chops were similar in Welsh Mountain and Suffolks-grass which differed from Soays and Suffolks-concentrates. The latter two groups had low scores for lamb flavour and overall liking and high scores for abnormal lamb flavour, metallic, bitter, stale, and rancid. Soays had the highest score for livery. These results extend previous findings of the association between feed, PUFA composition and lamb flavour profile and confirm that forage-fed lamb is preferred by UK taste panellists. They also identify a specific breed effect on the quality of meat from lambs raised on forage. These findings suggest that possibilities exist for the production of meat with specific quality characteristics.

Effects of fatty acids on meat quality: a review.

Interest in meat fatty acid composition stems mainly from the need to find ways to produce healthier meat, i.e. with a higher ratio of polyunsaturated (PUFA) to saturated fatty acids and a more favourable balance between n-6 and n-3 PUFA. In pigs, the drive has been to increase n-3 PUFA in meat and this can be achieved by feeding sources such as linseed in the diet. Only when concentrations of α-linolenic acid (18:3) approach 3% of neutral lipids or phospholipids are there any adverse effects on meat quality, defined in terms of shelf life (lipid and myoglobin oxidation) and flavour. Ruminant meats are a relatively good source of n-3 PUFA due to the presence of 18:3 in grass. Further increases can be achieved with animals fed grain-based diets by including whole linseed or linseed oil, especially if this is "protected" from rumen biohydrogenation. Long-chain (C20-C22) n-3 PUFA are synthesised from 18:3 in the animal although docosahexaenoic acid (DHA, 22:6) is not increased when diets are supplemented with 18:3. DHA can be increased by feeding sources such as fish oil although too-high levels cause adverse flavour and colour changes. Grass-fed beef and lamb have naturally high levels of 18:3 and long chain n-3 PUFA. These impact on flavour to produce a 'grass fed' taste in which other components of grass are also involved. Grazing also provides antioxidants including vitamin E which maintain PUFA levels in meat and prevent quality deterioration during processing and display. In pork, beef and lamb the melting point of lipid and the firmness/hardness of carcass fat is closely related to the concentration of stearic acid (18:0).