Tannin phenotyping of the Vitaceae reveals a phylogenetic linkage of epigallocatechin in berries and leaves.

BACKGROUND AND AIMS: Condensed tannins, responsible for berry and wine astringency, may have been selected during grapevine domestication. This work examines the phylogenetic distribution of condensed tannins throughout the Vitaceae phylogenetic tree. METHODS: Green berries and mature leaves of representative true-to-type members of the Vitaceae were collected before 'véraison', freeze-dried and pulverized, and condensed tannins were measured following depolymerization by nucleophilic addition of 2-mercaptoethanol to the C4 of the flavan-3-ol units in an organic acidic medium. Reaction products were separated and quantified by ultrahigh pressure liquid chromatography/diode array detection/mass spectrometry. KEY RESULTS AND CONCLUSIONS: The original ability to incorporate epigallocatechin (EGC) into grapevine condensed tannins was lost independently in both the American and Eurasian/Asian branches of the Vitaceae, with exceptional cases of reversion to the ancestral EGC phenotype. This is particularly true in the genus Vitis, where we now find two radically distinct groups differing with respect to EGC content. While Vitis species from Asia are void of EGC, 50 % of the New World Vitis harbour EGC. Interestingly, the presence of EGC is tightly coupled with the degree of leaf margin serration. Noticeably, the rare Asian EGC-forming species are phylogenetically close to Vitis vinifera, the only remnant representative of Vitis in Eurasia. Both the wild ancestral V. vinifera subsp. sylvestris as well as the domesticated V. vinifera subsp. sativa can accumulate EGC and activate galloylation biosynthesis that compete for photoassimilates and reductive power.

Impact of nitrogen deficiency on succinic acid production by engineered strains of Yarrowia lipolytica.

Yarrowia lipolytica strains PGC01003 and PGC202 engineered for succinic acid production were studied and compared to the wild type strain W29. For the first time, these two strains were characterized in a chemically defined medium. Strain growth and organic acid production were investigated in fed-batch mode with glycerol as carbon and energy source. This study evaluated the impact of nitrogen deficiency strategy to redirect carbon flux toward succinic acid synthesis. Strain PGC01003 produced 19 g L-1 succinic acid with an overall yield of 0.23 g g-1 and an overall productivity of 0.23 g L-1 h-1, while strain PGC202 produced 33 g L-1 succinic acid with an overall yield of 0.12 g g-1 and a productivity of 0.57 g L-1 h-1. Nitrogen limitation effectively stopped biomass growth and increased succinic acid yield of PGC01003 and PGC202 by 18 % and 62 %, respectively. However, the specific succinic acid production rate was reduced by 77 % and 66 %, respectively.

Furanolysis with Menthofuran: A New Depolymerization Method for Analyzing Condensed Tannins.

An improved analytical depolymerization method for characterizing condensed tannins was developed with menthofuran (3,6-dimethyl-4,5,6,7-tetrahydro-1-benzofuran) as the nucleophilic trapping reagent. Herein, menthofuran was compared with routinely used nucleophiles, phloroglucinol and 2-mercaptoethanol. At 30 °C and in the presence of 0.1 M HCl, menthofuran displayed the outstanding ability to enable the fast and full depolymerization of procyanidin B2 using only a 1:1 molar ratio of both reactants. Under the same conditions, phloroglucinol and 2-mercaptoethanol led to a reaction equilibrium with significantly lower conversion yields. Application to commercial tannin extracts showed that a menthofuran-to-extract weight ratio of 1 gave the same yields of procyanidin constitutive units as 10-fold higher molecular equivalent phloroglucinol and 100-fold 2-mercaptoethanol. Finally, guidelines for implementing the menthofuran depolymerization method are proposed to assess the tannin content and composition of extracts as well as of plant materials without prior extraction.

The use of extracted-ion chromatograms to quantify the composition of condensed tannin subunits.

RATIONALE: The analysis of tannins is currently usually done by liquid chromatography after the chemical depolymerization of tannins. However, one of the main limitations of this method is the difficulty in specifically detecting each constitutive tannin monomer in a complex matrix, as numerous compounds co-elute with the monomers, thereby compromising the analysis. METHODS: The depolymerization of tannins under acidic conditions and in the presence of thioglycolic acid releases the various constitutive monomers, either as terminal units or as extension units. The tannin subunits were then quantified using extracted-ion chromatogram (EIC) mass spectrometry, which required the determination of the ionization efficiency of the monomers. Thus, we used AgBF4-assisted coupling for the hemisynthesis of the noncommercial epicatechin gallate dimer. RESULTS: The EIC showed that the derivatives of the extension units were twice as ionized as the terminal units. Unlike the UV chromatograms, this new EIC-based method is more specific and accurate because it is not impacted by the co-elution phenomenon. This result, when added to the linearity obtained on a large range of the calibration curves, allowed for quantification of tannin subunits from EIC in complex mixtures with less pretreatment of the samples. CONCLUSIONS: Due to its specificity and sensitivity, this EIC-based method represents a significant step toward improving the quantification of the tannin composition of samples. The results of this study should allow the oxidation markers to be quantified more accurately and taken into account, thereby providing a better indication of the actual tannin composition.

New Biosourced Flame Retardant Agents Based on Gallic and Ellagic Acids for Epoxy Resins.

The aim of this work was an investigation of the ability of gallic (GA) and ellagic (EA) acids, which are phenolic compounds encountered in various plants, to act as flame retardants (FRs) for epoxy resins. In order to improve their fireproofing properties, GA and EA were treated with boric acid (to obtain gallic acid derivatives (GAD) and ellagic acid derivatives (EAD)) to introduce borate ester moieties. Thermogravimetric analysis (TGA) highlighted the good charring ability of GA and EA, which was enhanced by boration. The grafting of borate groups was also shown to increase the thermal stability of GA and EA that goes up respectively from 269 to 528 °C and from 496 to 628 °C. The phenolic-based components were then incorporated into an epoxy resin formulated from diglycidyl ether of bisphenol A (DGEBA) and isophorone diamine (IPDA) (72, 18, and 10 wt.% of DGEBA, IPDA, and GA or EA, respectively). According to differential scanning calorimetry (DSC), the glass transition temperature (Tg) of the thermosets was decreased. Its values ranged from 137 up to 108 °C after adding the phenolic-based components. A cone calorimeter was used to evaluate the burning behavior of the formulated thermosets. A significant reduction of the peak of heat release rate (pHRR) for combustion was detected. Indeed, with 10 wt.% of GA and EA, pHRR was reduced by 12 and 44%, respectively, compared to that for neat epoxy resin. GAD and EAD also induced the decrease of pHRR values by 65 and 33%, respectively. In addition, a barrier effect was observed for the resin containing GAD. These results show the important influence of the biobased phenolic compounds and their boron derivatives on the fire behavior of a partially biobased epoxy resin.

Monitoring anthocyanin degradation in Hibiscus sabdariffa extracts with multi-curve resolution on spectral measurement during storage.

This study aims to monitor composition changes in an anthocyanin-rich beverage during storage by the means of UV-VIS measurements associated with a multi-curve resolution procedure. Hibiscus sabdariffa extract was stored at 37 °C for 50 days and UV-VIS spectra were measured on the extract and the fractions of the extract every 5 days. MCR was carried out in two steps, first with the fraction and then the extract spectra. The results enabled the main polyphenols initially present to be identified, anthocyanins and chlorogenic acid, but also found the nature of the main degradation products: the polymers from anthocyanin condensation and scission products. In addition, comparison with HPLC analysis results showed that the MCR procedure recovered the correct shapes of the concentration profiles particularly of anthocyanin and polymer kinetics during storage. This work gives perspective for the use of a rapid and efficient technique to monitor pigment-rich beverage processing or storage.

Exploration of reaction mechanisms of anthocyanin degradation in a roselle extract through kinetic studies on formulated model media.

Effect of oxygen, polyphenols and metals was studied on degradation of delphinidin and cyanidin 3-O-sambubioside of Hibiscus sabdariffa L. Experiments were conducted on aqueous extracts degassed or not, an isolated polyphenolic fraction and extract-like model media, allowing the impact of the different constituents to be decoupled. All solutions were stored for 2months at 37°C. Anthocyanin and their degradation compounds were regularly HPLC-DAD-analyzed. Oxygen concentration did not impact the anthocyanin degradation rate. Degradation rate of delphinidin 3-O-sambubioside increased 6-fold when mixed with iron from 1 to 13mg.kg-1 but decreased with chlorogenic and gallic acids. Degradation rate of cyanidin 3-O-sambubioside was not affected by polyphenols but increased by 3-fold with increasing iron concentration with a concomitant yield decrease of scission product, protocatechuic acid. Two pathways of degradation of anthocyanins were identified: a major metal-catalyzed oxidation followed by condensation and a minor scission which represents about 10% of degraded anthocyanins.

Isolation of Native Proanthocyanidins from Grapevine (Vitis vinifera) and Other Fruits in Aqueous Buffer.

Condensed tannins (also called proanthocyanidins) present in strategic tissues of fruits (outer pericarp and vascular bundles) were known as short polymers of flavan-3-ols. A pretreatment of the plant material (fruits from the grapevine, persimmon) with buffered ascorbic acid and Triton X-100 followed by acetone extraction provided native white fully depolymerizable tannins. Tannins are usually extracted with aqueous solvents and further purified, although artifactual oxidations occur, altering their physicochemical characteristics. Compared to artifactually oxidized tannins prepared according to standard protocols, white tannins (also called leukotannins) exhibit a higher degree of polymerization and a far lower polydispersity.

Anthocyanins degradation during storage of Hibiscus sabdariffa extract and evolution of its degradation products.

Degradation parameters of two main anthocyanins from roselle extract (Hibiscus sabdariffa L.) stored at different temperatures (4-37°C) over 60days were determined. Anthocyanins and some of their degradation products were monitored and quantified using HPLC-MS and DAD. Degradation of anthocyanins followed first-order kinetics and reaction rate constants (k values), which were obtained by non-linear regression, showed that the degradation rate of delphinidin 3-O-sambubioside was higher than that of cyanidin 3-O-sambubioside with k values of 9.2·10(-7)s(-1) and 8.4·10(-7)s(-1) at 37°C respectively. The temperature dependence of the rate of anthocyanin degradation was modeled by the Arrhenius equation. Degradation of delphinidin 3-O-sambubioside (Ea=90kJmol(-1)) tended to be significantly more sensitive to an increase in temperature than cyanidin 3-O-sambubioside (Ea=80kJmol(-1)). Degradation of these anthocyanins formed scission products (gallic and protocatechuic acids respectively) and was accompanied by an increase in polymeric color index.

Effect of Temperature on Acidity and Hydration Equilibrium Constants of Delphinidin-3-O- and Cyanidin-3-O-sambubioside Calculated from Uni- and Multiwavelength Spectroscopic Data.

Delphinidin-3-O-sambubioside and cyanidin-3-O-sambubioside are the main anthocyanins of Hibiscus sabdariffa calyces, traditionally used to make a bright red beverage by decoction in water. At natural pH, these anthocyanins are mainly in their flavylium form (red) in equilibrium with the quinonoid base (purple) and the hemiketal (colorless). For the first time, their acidity and hydration equilibrium constants were obtained from a pH-jump method followed by UV-vis spectroscopy as a function of temperature from 4 to 37 °C. Equilibrium constant determination was also performed by multivariate curve resolution (MCR). Acidity and hydration constants of cyanidin-3-O-sambubioside at 25 °C were 4.12 × 10(-5) and 7.74 × 10(-4), respectively, and were significantly higher for delphinidin-3-O-sambubioside (4.95 × 10(-5) and 1.21 × 10(-3), respectively). MCR enabled the obtaining of concentration and spectrum of each form but led to overestimated values for the equilibrium constants. However, both methods showed that formations of the quinonoid base and hemiketal were endothermic reactions. Equilibrium constants of anthocyanins in the hibiscus extract showed comparable values as for the isolated anthocyanins.

How to gain insight into the polydispersity of tannins: a combined MS and LC study.

In the context of the potential health benefits of food polyphenols, the bioavailability of tannins (i.e. proanthocyanidins) is a major issue, which is strongly influenced by the polydispersity and the degree of polymerisation of tannins. The average degree of polymerisation (DP) of tannins is usually determined using depolymerisation methods, which do not provide any information about their polymer distribution. Moreover, it is still a challenge to characterise tannin fractions of high polydispersity and/or containing polymers of high molecular weights, due to the limit of detection of direct mass spectrometry (MS) analysis methods. In the present work, the polydispersity of several tannin fractions is investigated by two complementary methods: a MALDI-MS method and a semi-preparative sub-fractionation. Using a combination of these methods we are able to gain insight into the DP distributions of the fractions consisting of tannins of medium and high DP. Moreover combining analyses can be useful to assess and compare the DP distributions of most tannin fractions.

Probing the micellar solubilisation and inter-micellar exchange of polyphenols using the DPPH· free radical.

Encapsulation of polyphenols can be used for improving their stability and targeting. We present here a spectrophotometric method to probe the micellar solubilisation and inter-micellar exchange of polyphenols using the 2,2-diphenyl-1-picrylhydrazyl (DPPH·) free radical as a visible probe. Our method relies on the partitioning of DPPH· into micelles, on the reduction of DPPH· by polyphenols, and on the change in absorbance of DPPH· when reduced/oxidised. Hence, an absorbance drop at 528 nm gives evidence of the co-localisation of polyphenols and DPPH· in micelles. Using catechin and sodium dodecyl sulfate (SDS) as model molecules, we have shown that the reduction stoichiometry increases up to the critical micelle concentration (CMC) of SDS, where it reaches a plateau: this is due to the solubilisation of catechin in pre-micellar aggregates and then in micelles. The initial rate of reduction increases with increasing SDS concentration up to the CMC and then decreases due to a dilution effect.

The tannosome is an organelle forming condensed tannins in the chlorophyllous organs of Tracheophyta.

BACKGROUND AND AIMS: Condensed tannins (also called proanthocyanidins) are widespread polymers of catechins and are essential for the defence mechanisms of vascular plants (Tracheophyta). A large body of evidence argues for the synthesis of monomeric epicatechin on the cytosolic face of the endoplasmic reticulum and its transport to the vacuole, although the site of its polymerization into tannins remains to be elucidated. The aim of the study was to re-examine the cellular frame of tannin polymerization in various representatives of the Tracheophyta. METHODS: Light microscopy epifluorescence, confocal microscopy, transmission electron microscopy (TEM), chemical analysis of tannins following cell fractionation, and immunocytochemistry were used as independent methods on tannin-rich samples from various organs from Cycadophyta, Ginkgophyta, Equisetophyta, Pteridophyta, Coniferophyta and Magnoliophyta. Tissues were fixed in a caffeine-glutaraldehyde mixture and examined by TEM. Other fresh samples were incubated with primary antibodies against proteins from both chloroplastic envelopes and a thylakoidal chlorophyll-carrying protein; they were also incubated with gelatin-Oregon Green, a fluorescent marker of condensed tannins. Coupled spectral analyses of chlorophyll and tannins were carried out by confocal microscopy on fresh tissues and tannin-rich accretions obtained through cell fractionation; chemical analyses of tannins and chlorophylls were also performed on the accretions. KEY RESULTS AND CONCLUSIONS: The presence of the three different chloroplast membranes inside vacuolar accretions that constitute the typical form of tannin storage in vascular plants was established in fresh tissues as well as in purified organelles, using several independent methods. Tannins are polymerized in a new chloroplast-derived organelle, the tannosome. These are formed by pearling of the thylakoids into 30 nm spheres, which are then encapsulated in a tannosome shuttle formed by budding from the chloroplast and bound by a membrane resulting from the fusion of both chloroplast envelopes. The shuttle conveys numerous tannosomes through the cytoplasm towards the vacuole in which it is then incorporated by invagination of the tonoplast. Finally, shuttles bound by a portion of tonoplast aggregate into tannin accretions which are stored in the vacuole. Polymerization of tannins occurs inside the tannosome regardless of the compartment being crossed. A complete sequence of events apparently valid in all studied Tracheophyta is described.

UPLC-ESI-MS study of the oxidation markers released from tannin depolymerization: toward a better characterization of the tannin evolution over food and beverage processing.

Condensed tannins take an important part in the sensory quality of food and beverage. Sensory analyses are usually carried out with various tannin fractions isolated from food or beverage, and their interpretation are limited by the lack of knowledge in the fine and accurate molecular composition of the tannin fractions. Besides, the studies of the chemical reactivity conducted in model solutions with 'simple' flavanols allow a better understanding of their evolution pathways, but they cannot take into account their reactivity as polymers, specifically regarding oxidation. In particular, competition between intramolecular and intermolecular reactions may strongly impact on the tannin structures (size, branching and conformation) and consequently on their properties. An ultra-performance liquid chromatography-mass spectrometry electrospray ionization mass spectrometer analytical method was thus developed in order to identify oxidized tannins generated by autoxidation. Given the difficulties to separate and detect tannins with high DP, samples were depolymerized by chemical depolymerization prior to analysis. Since the linkages created by oxidation are not cleavable in the usual depolymerization conditions (contrarily to the original interflavanic linkages), specific oxidation residues are released from tannins structures after their autoxidation. Oxidation markers of both intermolecular and intramolecular mechanisms have been identified; these are mainly dimers and trimers, more or less oxidized, and some contain additional hydroxyl groups. Furthermore, the nature of the subunits (extension vs terminal) making up these dimers and trimers was clearly established.

Characterization of oxidized tannins: comparison of depolymerization methods, asymmetric flow field-flow fractionation and small-angle X-ray scattering.

Condensed tannins are a major class of plant polyphenols. They play an important part in the colour and taste of foods and beverages. Due to their chemical reactivity, tannins are not stable once extracted from plants. A number of chemical reactions can take place, leading to structural changes of the native structures to give so-called derived tannins and pigments. This paper compares results obtained on native and oxidized tannins with different techniques: depolymerization followed by high-performance liquid chromatography analysis, small-angle X-ray scattering (SAXS) and asymmetric flow field-flow fractionation (AF4). Upon oxidation, new macromolecules were formed. Thioglycolysis experiments showed no evidence of molecular weight increase, but thioglycolysis yields drastically decreased. When oxidation was performed at high concentration (e.g., 10 g L(-1)), the weight average degree of polymerization determined from SAXS increased, whereas it remained stable when oxidation was done at low concentration (0.1 g L(-1)), indicating that the reaction was intramolecular, yet the conformations were different. Differences in terms of solubility were observed; ethanol being a better solvent than water. We also separated soluble and non-water-soluble species of a much oxidized fraction. Thioglycolysis showed no big differences between the two fractions, whereas SAXS and AF4 showed that insoluble macromolecules have a weight average molecular weight ten times higher than the soluble ones.

Comprehensive study of condensed tannins by ESI mass spectrometry: average degree of polymerisation and polymer distribution determination from mass spectra.

The determination of the molecular mass distribution of tannins is still a challenge. To elucidate it, mass spectrometry is potentially interesting, but many previous studies have highlighted that the mass spectra of a tannin fraction do not always reflect the actual abundance of different chain lengths. To clarify the potentialities offered by the MS approach, a comprehensive study involving different tannin fractions analysed under different conditions was conducted with an electrospray ionization (ESI) source. This study allowed optimised ESI-MS conditions to be established for analysing tannins but also it outlines the limits of detection encountered. If the detection of high molecular weight tannins seems difficult or even impossible, the spectral distortions brought about by this limitation are not totally related to the sole average degree of polymerisation of the tannin fraction studied but greatly depend on its polymer distribution. However, ESI-MS used under optimised conditions is a suitable method to study tannin composition of vegetable extracts which contain degree of polymerisations below 26.

Tannin oxidation: intra- versus intermolecular reactions.

Grape and apple condensed tannin fractions were autoxidized at high concentrations (5 g/L) in aqueous solutions and analyzed by thiolysis (depolymerization followed by HPLC analysis) and small angle X-ray scattering (SAXS). Structural parameters of native (unoxidized) tannin polymers were derived from SAXS according to the wormlike chain model: the length per monomer is 15 A, the length of the statistical segment 17 A, and the cross section of the macromolecule has a radius within the range 3-4.5 A. The rather short length of the statistical segment is an effect of the different location of interflavanol linkages, which cause a loss of orientational correlation between successive monomers. Oxidation created new bonds that were resistant to thiolysis, and, according to thiolysis, some of these new bonds were intramolecular. However, according to SAXS, oxidation at high tannin concentration caused the weight average degree of polymerization to increase, indicating that intermolecular reactions took place as well, creating larger macromolecules. In the case of the smaller grape seed tannins, these intermolecular reactions took place "end to end" leading to the formation of longer linear macromolecules, at least in the earlier stages of oxidation. In the case of the larger apple tannins, the SAXS patterns were characteristic of larger branched macromolecules. Accordingly, the intermolecular reactions were mainly "end to middle". This is in agreement with the higher probabilities of "end to middle" reactions arising from a higher ratio extension unit/terminal unit in the latter case.

Antioxidant activity of wine pigments derived from anthocyanins: hydrogen transfer reactions to the dpph radical and inhibition of the heme-induced peroxidation of linoleic acid.

The consumption of red wine can provide substantial concentrations of antioxidant polyphenols, in particular grape anthocyanins (e.g., malvidin-3-O-beta-d-glucoside (1)) and specific red wine pigments formed by reaction between anthocyanins and other wine components such as catechin (3), ethanol, and hydroxycinnamic acids. In this work, the antioxidant properties of red wine pigments (RWPs) are evaluated by the DPPH assay and by inhibition of the heme-induced peroxidation of linoleic acid in acidic conditions (a model of antioxidant action in the gastric compartment). RWPs having a 1 and 3 moieties linked via a CH(3)-CH bridge appear more potent than the pigment with a direct 1-3 linkage. Pyranoanthocyanins derived from 1 reduce more DPPH radicals than 1 irrespective of the substitution of their additional aromatic ring. Pyranoanthocyanins are also efficient inhibitors of the heme-induced lipid peroxidation, although the highly hydrophilic pigment derived from pyruvic acid appears less active.

New compounds obtained by evolution and oxidation of malvidin 3-O-glucoside in ethanolic medium.

Two new colorless phenolic compounds were formed from malvidin 3- O-glucoside incubated in an ethanolic solution. Their structures were characterized by means of one- and two-dimensional NMR analysis and through electrospray ionization-mass spectrometry. As compared to the structure of the initial anthocyanin skeleton, the first new compound showed the presence of two fused five-membered rings replacing the pyran ring and of a carbonyl function on the 2-position. The first five-membered ring was shown to result from the formation of a new linkage between the B ring 6'-position and the C ring 4-position, while the second was a dihydro furan ring with an oxygenated ether linkage between the 8a-position and the 3-position. The second isolated compound was shown to have similar structure with an ethyl ether moiety in the 3-position instead of the glucose moiety. A mechanism explaining the formation of the isolated compounds involving the passage through the chalcone form of the anthocyanin and an oxidation process is proposed.

Direct mass spectrometry approaches to characterize polyphenol composition of complex samples.

Lower molecular weight polyphenols including proanthocyanidin oligomers can be analyzed after HPLC separation on either reversed-phase or normal phase columns. However, these techniques are time consuming and can have poor resolution as polymer chain length and structural diversity increase. The detection of higher molecular weight compounds, as well as the determination of molecular weight distributions, remain major challenges in polyphenol analysis. Approaches based on direct mass spectrometry (MS) analysis that are proposed to help overcome these problems are reviewed. Thus, direct flow injection electrospray ionization mass spectrometry analysis can be used to establish polyphenol fingerprints of complex extracts such as in wine. This technique enabled discrimination of samples on the basis of their phenolic (i.e. anthocyanin, phenolic acid and flavan-3-ol) compositions, but larger oligomers and polymers were poorly detectable. Detection of higher molecular weight proanthocyanidins was also restricted with matrix-assisted laser desorption ionization (MALDI) MS, suggesting that they are difficult to desorb as gas-phase ions. The mass distribution of polymeric fractions could, however, be determined by analyzing the mass distributions of bovine serum albumin/proanthocyanidin complexes using MALDI-TOF-MS.