ABSTRACT
Nanotechnology is a route of choice that improves administration and efficacy of bioactive compounds. In this study, nanoemulgels were prepared using microfibrillated cellulose from Argania spinosa shell (AS-MFC) and Argan shell (ASE) or Argan press cake extracts (APC) as natural emulsifiers. Oil-in-water (O/W) nanoemulsions were prepared using different natural emulsifiers or synthetic emulsifiers and presented a nano size (d3,2 < 140 nm). Following that, the nanoemulsions were incorporated within AS-MFC matrix and rheological properties confirmed a shear thinning behavior. Confocal micrographs of nanoemulgels confirmed the dispersion of nanoemulsions in the AS-MFC network without affecting the nanoemulsions stability. Finally, in vitro bioassay on B16F10 using ASE or APC nanoemulsions was conducted. This study confirmed cell permeation in B16F10 cells of formulated nanoemulsions and the upregulation of melanin content up to 30% more that the untreated cells. This study designed novel MFC nanoemulgel with high potential application in healthcare and cosmetic field.
Subject(s)
Cellulose/chemistry , Emulsifying Agents/chemistry , Plant Extracts/chemistry , Sapotaceae/metabolism , Particle SizeABSTRACT
BACKGROUND: Hair follicle undergoes a growth cycle under the regulation of dermal papilla cells. Due to their enormous roles, these fibroblast cells have been used in various in vitro studies as a screening model to evaluate the effect of hair growth regulating agents. OBJECTIVE: In the current study, we aim to check the hair growth potential effect of Argan press cake (APC) extracted using 50 or 80 % aqueous ethanol on human hair follicle dermal papilla cells (HFDPCs) and to determine the molecular mechanism. METHODS: APC were applied to HFDPCs, then cell proliferation assays, mitochondrial biogenesis assay, and oxidative stress assay were assessed. DNA microarray was performed from the cells treated with our samples and minoxidil. Validation of the results was done using Quantitative Real-Time PCR with primers for hair-growth related genes. GC/MS analysis was used to determine the compounds contained in APC 50 and 80 %. RESULTS: APC enhanced cell proliferation along with the stimulation of the ATP content. Additionally, APC had an anti-oxidant activity against H2O2 mediated oxidative stress preventing dermal papilla cell senescence. Consistent with this, global gene profiling analysis showed an activation of hair growth-related pathway, and a downregulation of inflammation- and oxidative stress-related genes by APC extracts. GC/MS analysis revealed that these extracts contained pure fatty acids, derived sugar chains, and pure compounds including tocopherols, squalene, and spinasterol. CONCLUSION: Taken together, here we showed that APC extracts had an effect on stimulating hair growth while inhibiting the inflammation and the oxidative stress of HFDPCs and thus can potentially contribute to an anti-hair loss drug development.
Subject(s)
Alopecia/drug therapy , Hair Follicle/drug effects , Plant Extracts/pharmacology , Sapotaceae/chemistry , Alopecia/immunology , Antioxidants , Cell Line , Cell Proliferation/drug effects , Cells, Cultured , Drug Evaluation, Preclinical , Hair Follicle/immunology , Humans , Oxidative Stress/drug effects , Oxidative Stress/immunology , Plant Extracts/therapeutic useABSTRACT
This study compared the interfacial and emulsifying properties of purified saponins and non-purified saponin-rich extracts of Glycyrrhiza glabra, and highlighted potential mechanisms by which crude surface-active compositions, such as liquorice root extract (LRE), act as emulsifiers. LRE presented different fluid properties, in comparison to purified glycyrrhizin (PG), at equivalent glycyrrhizin concentrations. Particularly, it exhibited limited glycyrrhizin fibrilization at pH < pKa and efficiently reduced the interfacial tension at the soybean oil/water interface, independently of pH. LRE also presented better emulsification properties, in comparison to PG samples. Emulsions prepared using LRE had lower droplet sizes when using higher oil mass fractions or lower homogenization pressures, which was attributed to 2 main factors: (i) efficient adsorption of glycyrrhizin molecules at relatively low interfacial curvatures, thus accelerating oil phase breakup during homogenization and (ii) sufficient coverage of newly generated droplets due to adsorption of residual surface-active components (e.g. proteins), thus minimizing droplet coalescence.
Subject(s)
Emulsifying Agents/chemistry , Glycyrrhizic Acid/chemistry , Plant Extracts/chemistry , Emulsions/chemistry , Glycyrrhiza/chemistry , Saponins/chemistry , Soybean Oil/chemistry , Surface Tension , Water/chemistryABSTRACT
Microfibrillated cellulose (MFC) from Argan (Argania spinosa) shells was prepared by chemical purification of cellulose, then mechanical disintegration via high pressure homogenization was performed to isolate fibrils of cellulose. Chemical characterization of raw argan shell (AS-R), purified cellulose (AS-C), and argan shell MFC (AS-MFC) included FT-IR, XRD and NMR. Morphological characterization of AS-MFC was assessed using TEM. Next, the use of AS-MFC as oil-in-water (O/W) emulsions stabilizer was investigated. The particle concentration was observed to affect the long-term stability of the emulsions; high concentrations (0.5-1 % w/w) of AS-MFC resulted in emulsions that were thermodynamically stable during 15 days of storage, which was demonstrated by the droplet's size evolution. The suitable oil concentration for a maximum volume of emulsion using 1 % w/w AS-MFC was demonstrated. The results show that AS-MFC is able to stabilize 70 % w/w MCT oil without visual phase separation. Finally, CLSM shows the adsorption of AS-MFC at the oil-water interface and the formation of a 3D network surrounding oil droplets, confirming Pickering emulsion formation and stabilization.
Subject(s)
Cellulose/chemistry , Sapotaceae/chemistry , Electrolytes , Emulsions , Hydrogen-Ion Concentration , Magnetic Resonance Spectroscopy , Microscopy, Confocal , Microscopy, Electron, Transmission , Nanofibers/chemistry , Nanofibers/ultrastructure , Particle Size , Plant Oils/chemistry , Spectroscopy, Fourier Transform Infrared , Water , X-Ray DiffractionABSTRACT
BACKGROUND: Polysaccharides may enhance/inhibit lipid digestibility of oil-in-water (O/W) emulsions because of their emulsifying and/or stabilizing ability and can also affect the formation, stability, and viscosity of emulsions. Tamarind seed gum (TSG) was used as the sole emulsifier/stabilizer to stabilize an O/W emulsion prepared using high-speed homogenization. We investigated the effects of various TSG concentrations (50-150 g kg-1 ) on the lipid digestibility, rheological properties, and stability of O/W emulsions during in vitro gastrointestinal digestion. RESULTS: A low concentration (50 g kg-1 ) and a high concentration (150 g kg-1 ) of TSG reduced lipid digestibility by about 33% and 45%, respectively, compared to the control sample (without TSG). However, the emulsion containing the intermediate TSG concentration at 100 g kg-1 was the most efficient in the inhibition of lipid digestion, reducing lipid digestibility by about 70% compared to that of the control sample. The stability of emulsion tended to enhance as the concentration of TSG increased. The size of oil droplets before passing through the intestinal phase and the viscosity of the intestinal digested system may be important factors for enhancing/inhibiting lipid digestibility of emulsions. The destabilization of the emulsion during digestion was not clearly detected by rheological analysis because rheological characteristics (e.g. flow behavior index) were mainly driven by TSG. CONCLUSIONS: The addition of TSG in O/W emulsions inhibited lipid digestibility. TSG at a concentration of 100 g kg-1 was the most efficient in the inhibition of lipid digestibility, suggesting that TSG is an attractive alternative ingredient for control of lipid digestibility of emulsion foods. © 2020 Society of Chemical Industry.
Subject(s)
Emulsions/chemistry , Lipid Metabolism , Plant Gums/chemistry , Tamarindus , Digestion , Emulsifying Agents , Emulsions/metabolism , Rheology , Soybean Oil/chemistry , Water/chemistryABSTRACT
The formulation, physicochemical stability and bioaccessibility of astaxanthin (AST) loaded oil-in-water nanoemulsions fabricated using gypenosides (GPs) as natural emulsifiers was investigated and compared with a synthetic emulsifier (Tween 20) that is commonly applied in food industry. GPs were capable of producing nanoemulsions with a small volume mean diameter (d4,3â¯=â¯125⯱â¯2â¯nm), which was similar to those prepared using Tween 20 (d4,3â¯=â¯145⯱â¯6â¯nm) under the same high-pressure homogenization conditions. GPs-stabilized nanoemulsions were stable against droplet growth over a range of pH (6-8) and thermal treatments (60-120⯰C). Conversely, instability occurred under acidic (pH 3-5) and high ionic strength (25-100â¯mM CaCl2) conditions. In comparison with Tween 20, GPs were more effective at inhibiting AST from degradation during 30â¯days of storage at both 5 and 25⯰C. However, GPs led to lower lipid digestion and AST bioaccessibility from nanoemulsions than did Tween 20.
Subject(s)
Emulsifying Agents/chemistry , Emulsions/chemistry , Gynostemma/chemistry , Kinetics , Osmolar Concentration , Plant Extracts/chemistry , Polysorbates/chemistry , Xanthophylls/chemistryABSTRACT
Betanin is the main pigment of the food color beetroot red (E162). Due to the fair heat and light stability of E162, this pigment is mainly used in minimally processed packaged food products. Encapsulation increases the stability of betanin, but detailing on the effect of different sources of betanin on the properties and stability of multiple emulsions are scarce. Here we describe the encapsulation of E162, spray-dried beetroot juice and betanin in a monodisperse food-grade water-in-oil-in-water (W/O/W) emulsions by using microchannel emulsification. We compare the tinctorial strength of the encapsulated pigments and investigate the effect of temperature, storage period and pigment concentration on emulsion stability and color. Betanin increases the overall stability of the W/O/W emulsion, reduce the oil droplet size and improve size distribution when compared to the negative control without pigment and to emulsions containing betanin from other sources.
Subject(s)
Beta vulgaris , Betacyanins/chemistry , Coloring Agents/chemistry , Food Handling/methods , Fruit and Vegetable Juices/analysis , Soybean Oil/chemistry , Water/chemistry , Color , Emulsions , Food Storage , Particle Size , Powders , Temperature , Time FactorsABSTRACT
In this study ginseng saponins (GS) were used as natural emulsifiers to formulate and stabilize O/W nanoemulsions loaded with astaxanthin (AST). GS were found to be highly effective at reducing the interfacial tension at the soybean oil-water interfaces, and were capable of producing nano-scaled droplets (d4,3â¯≈â¯125â¯nm) using a high-pressure homogenizer. The droplet size of the nanoemulsions decreased with increasing emulsifier concentration and homogenization pressure. The nanoemulsions were stable without droplet coalescence against thermal treatment (30-90⯰C, 30â¯min), and over a narrow range of pH values (7-9). GS-coated droplets were unstable in acidic conditions (pH 3-6) and in the presence of salt (>25â¯mM NaCl). The formulated nanoemulsions showed slight change in d4,3 during 15â¯days of storage at 5, 25 and 40⯰C. However, the chemical stability strongly depended on the storage temperature, with the lowest level of AST retained in nanoemulsions stored at higher temperature.
Subject(s)
Emulsifying Agents/chemistry , Emulsions/chemistry , Nanotechnology/methods , Panax/chemistry , Saponins/chemistry , Dietary Supplements/analysis , Drug Stability , Hydrogen-Ion Concentration , Particle Size , Soybean Oil , Surface Tension , Temperature , Water , Xanthophylls/analysisABSTRACT
In this study, we formulated and stabilized oil-in-water nanoemulsions using a crude extract from argan press-cake as sole emulsifier. Various extracts from argan press-cake were prepared in order to select the most surface-active one(s) foreseeing emulsions preparation. Fifty percent (v/v) ethanolic extract reduced the interfacial tension to a minimum value at both MCT oil and soybean oil interfaces (12.7 and 10.5â¯mNâ¯m-1 respectively). This extract was also effective at producing fine emulsions with small droplet sizes (d3,2â¯<â¯115â¯nm) and good physical stability using different oils such as soybean oil, MCT oil and fish oil and at conventional homogenization conditions (100â¯MPa for 4 passes). On the other hand, the emulsions were very sensitive to NaCl addition (≥25â¯mM) and to acidic pH (<3) indicating that the main stabilization mechanism is electrostatic, likely due to the presence of surface-active compounds with ionizable groups such as saponins.
Subject(s)
Emulsions/chemistry , Plant Oils/chemistry , Emulsifying Agents/chemistry , Fish Oils/chemistry , Nanostructures/chemistry , Saponins/chemistry , Sodium Chloride/chemistry , Soybean Oil/chemistry , Surface Tension , Water/chemistryABSTRACT
This study evaluates the effect of modified lecithin (ML) and sodium caseinate (SC) on the formulation, stability and bioaccessibility of astaxanthin (AXT) loaded oil-in-water (O/W) nanoemulsions. These nanoemulsions were formulated using high-pressure homogenization in four passes at 100MPa. The volume mean diameter (d4,3) of nanoemulsions produced by ML and SC were 163±5 and 144±12 nm, respectively. The physiochemical stability of nanoemulsions was recorded at 25°C. The nanoemulsions prepared by ML were stable for 30 minutes against a wide range of pH and heating temperatures (60-120 °C). However, ML-stabilized nanoemulsions showed droplet growth when treated at high NaCl concentrations. In comparison, droplet growth was observed in SC-stabilized nanoemulsions at pH4 and at high temperature treatment. However, SC-stabilized nanoemulsions were stable at high NaCl concentration (500 mM). The SC-stabilized nanoemulsions showed good physical and chemical stability (>70%) after 30 days of storage. The bioaccessibility of AXT in nanoemulsions was significantly higher in ML (33%) than in SC-stabilized nanoemulsions (6%), indicating a strong influence of emulsifier on bioaccessibility. These findings provide valuable information in designing nutritional products such as aqueous based AXT fortified beverages.
Subject(s)
Caseins/chemistry , Dietary Supplements , Emulsifying Agents/chemistry , Lecithins/chemistry , Nanoparticles , Soybean Oil/chemistry , Water/chemistry , Digestion , Drug Stability , Emulsions , Food Handling/methods , Hydrogen-Ion Concentration , Osmolar Concentration , Temperature , Time Factors , Xanthophylls/chemistryABSTRACT
The objective of this study is to evaluate the effect of either a solution of Thymus capitatus essential oil or its nanoemulsion on the quality of milk contaminated by bacteria. After 24h of S. aureus inoculation, bacterial growth reached 202×10(3)CFU/ml in the presence of the essential oil while it was limited to 132×10(3)CFU/ml when treated with nanoemulsion. The reduction of antioxidant capacity of milk treated with essential oil was higher when treated with nanoemulsion. Moreover, free essential oil was more efficient in protecting proteins from degradation than the nanoemulsion. For instance, after 24h of E. hirae contamination, 26% of the total proteins were consumed in the presence of nano-encapsulated essential oil, while only 14% of the initial content was consumed when free essential oil was added. Concerning milk acidity increase and the inhibition of peroxide production, no statistical differences have been recorded between the use of free essential oil or its nano-emulsion. In conclusion, bulk or nano-encapsulated T. capitatus essential oil preserve milk quality and can extend its shelf life.
Subject(s)
Food Preservation/methods , Food Preservatives/pharmacology , Milk/microbiology , Oils, Volatile/pharmacology , Plant Oils/pharmacology , Thymus Plant/chemistry , Animals , Cattle , Milk/chemistry , Nanoparticles/chemistry , Staphylococcus aureus/drug effects , Staphylococcus aureus/growth & developmentABSTRACT
The study used microchannel emulsification (MCE) to encapsulate quercetin in food grade oil-in-water (O/W) emulsions. A silicon microchannel plate (Model WMS 1-2) comprised of 10,300 discrete 10×104µm microslots was connected to a circular microhole with an inner diameter of 10µm. 1% (w/w) Tween 20 was used as optimized emulsifier in Milli-Q water, while 0.4mgml(-1) quercetin in different oils served as a dispersed phase. The MCE was carried by injecting the dispersed phase at 2mlh(-1). Successful emulsification was conducted below the critical dispersed phase flux, with a Sauter mean diameter of 29µm and relative span factor below 0.25. The O/W emulsions remained stable in terms of droplet coalescence at 4 and 25°C for 30days. The encapsulation efficiency of quercetin in the O/W emulsions was 80% at 4°C and 70% at 25°C during the evaluated storage period.
Subject(s)
Emulsions , Quercetin/chemistry , Chemistry, Pharmaceutical , Emulsifying Agents , Plant OilsABSTRACT
Nanoscale Science, Engineering and Technology are applied to Food and Nutrition. Various delivery systems include nanoemulsions, microemulsions, solid lipid nanoparticles, micelles, and liposomes. The nanoscale systems have advantages, such as higher bioavailabitity, and other physicochemical properties. The symposium will provide an overview of the formulation, characterization, and utilization of nanotechnology-based food and nutrition.
Subject(s)
Dietary Supplements , Emulsions , Food Technology , Functional Food , Lipids , Nanoparticles , Nanotechnology , Engineering , Humans , Liposomes , MicellesABSTRACT
This study sought to encapsulate a high concentration of L-ascorbic acid, up to 30% (w/v), in the inner aqueous phase of water-in-oil-water (W/O/W) emulsions with soybean oil as the oil phase. Two-step homogenization was conducted to prepare W/O/W emulsions stabilized by a hydrophobic emulsifier and 30% (v/v) of W/O droplets stabilized by a hydrophilic emulsifier. First-step homogenization prepared W/O emulsions with an average aqueous droplet diameter of 2.0 to 3.0 µm. Second-step homogenization prepared W/O/W emulsions with an average W/O droplet diameter of 14 to 18 µm and coefficients of variation (CVs) of 18% to 25%. The results indicated that stable W/O/W emulsions containing a high concentration of L-ascorbic acid were obtained by adding gelatin and magnesium sulfate in the inner aqueous phase and glucose in both aqueous phases. L-Ascorbic acid retention in the W/O/W emulsions was 40% on day 30 and followed first-order kinetics.
Subject(s)
Ascorbic Acid/chemistry , Emulsions/chemistry , Water/chemistry , Ascorbic Acid/metabolism , Drug Stability , Gelatin/chemistry , Humans , Kinetics , Magnesium Sulfate/chemistry , Particle Size , Soybean Oil/chemistryABSTRACT
Soybean oil-in-water (O/W) emulsion-agar gel samples were prepared and their digestibility evaluated by using an in vitro gastrointestinal digestion model. Emulsion-agar sols were obtained by mixing the prepared O/W emulsions with a 1.5 wt % agar solution at 60 °C, and their subsequent cooling at 5 °C for 1 h formed emulsion-agar gels. Their gel strength values increased with increasing degree of polymerization of the emulsifiers, and the relative gel strength increased in the case of droplets with an average diameter smaller than 700 nm. Flocculation and coalescence of the released emulsion droplets depended strongly on the emulsifier type; however, the emulsifier type hardly affected the ζ-potential of emulsion droplets released from the emulsion-agar gels during in vitro digestion. The total FFA content released from each emulsion towards the end of the digestion period was nearly twice that released from the emulsion-agar gel, indicating that gelation of the O/W emulsion may have delayed lipid hydrolysis.
Subject(s)
Agar/chemistry , Digestion , Food Handling/methods , Gastrointestinal Tract/physiology , Soybean Oil/chemistry , Soybean Oil/metabolism , Water/chemistry , Biological Availability , Biomimetics , Emulsions , Fatty Acids, Nonesterified/analysis , Gels , Hydrolysis , Soybean Oil/pharmacokineticsABSTRACT
The inhibitory effect of Picholine olive oil from Montpellier in Southern France on the chemical mediator release in type I allergy, using rat basophilic leukemia (RBL-2H3) cells, was investigated. Oil-in-water (O/W) emulsions prepared using Picholine olive oil showed an inhibitory effect on the chemical mediator release and decreased expressions of genes related to type I allergy in RBL-2H3 cells. We then measured the phenolic compounds present in Picholine olive oil using high-performance liquid chromatography and investigated some physical properties, such as droplet size, size distribution, viscosity, and surface tension of the resulting olive O/W emulsions. Our findings indicate that Picholine olive oil has high flavonoids content, especially apigenin, and the prepared emulsion of Picholine olive oil resulted in a considerable small size distribution, with an average droplet size of 170 nm.
Subject(s)
Anti-Allergic Agents/pharmacology , Plant Oils/chemistry , Plant Oils/pharmacology , Water/chemistry , beta-N-Acetylhexosaminidases/antagonists & inhibitors , Animals , Apigenin/analysis , Cell Line, Tumor , Chemical Phenomena , Emulsions , France , Hypersensitivity/genetics , Leukemia, Basophilic, Acute , Luteolin/analysis , Olea , Olive Oil , Rats , Species Specificity , TranscriptomeABSTRACT
This paper characterizes the physico-chemical properties of the soybean oil-based polymeric surfactant, Palozengs R-004 (hereafter referred to as R-004). The surface activity of R-004 is comparable to the reported activities of biosurfactants produced by microorganisms and higher than some of the conventional synthetic surfactants. The surface tension of Milli-Q water was reduced to a minimum value of roughly 30mN/m at a concentration of about 0.07wt.%. R-004 exhibited a unique aggregation behavior: small aggregates (pre-micelles) were formed at very low concentrations. Zeta-potential measurements showed that the micelles of R-004 are negatively charged due to the presence of carboxylic groups. The ability of R-004 to form and stabilize microbubbles was evaluated and was found to be greatly affected by filtration while remaining independent of R-004 concentration over the concentration range studied (0.05-0.5wt.%). These results suggest that a very low level of surfactant can be used to produce microbubbles without affecting their properties. Our results suggest the possibility of using soybean oil-based surfactants to food, pharmaceutical, and cosmetic applications.
Subject(s)
Soybean Oil , Surface-Active Agents , Filtration , Micelles , Particle Size , Surface TensionABSTRACT
A putative endo-beta-1,4-D-galactanase gene of Thermotoga maritima was cloned and overexpressed in Escherichia coli. The recombinant enzyme hydrolyzed pectic galactans and produced D-galactose, beta-1,4-D-galactobiose, beta-1,4-D-galactotriose, and beta-1,4-D-galactotetraose. The enzyme displayed optimum activity at 90 degrees C and pH 7.0. It was slowly inactivated above pH 8.0 and below pH 5.0 and stable at temperatures up to 80 degrees C.
Subject(s)
Glycoside Hydrolases/metabolism , Thermotoga maritima/enzymology , Enzyme Stability , Galactans/metabolism , Hydrogen-Ion Concentration , Hydrolysis , Solanum tuberosum/metabolism , TemperatureABSTRACT
In this study, we investigated the use of microchannel (MC) emulsifications in producing monodisperse gelatin/acacia complex coacervate microcapsules of soybean oil. This is considered to be a novel method for preparing monodisperse O/W and W/O emulsions. Generally, surfactants are necessary for MC emulsification, but they can also inhibit the coacervation process. In this study, we investigated a surfactant-free system. First, MC emulsification using gelatin was compared with that using decaglycerol monolaurate. The results demonstrated the potential use of gelatin for MC emulsification. MC emulsification experiments conducted over a range of conditions revealed that the pH of the continuous phase should be maintained above the isoelectric point of the gelatin. A high concentration of gelatin was found to inhibit the production of irregular-sized droplets. Low-bloom gelatin was found to be suitable for obtaining monodisperse emulsions. Finally, surfactant-free monodisperse droplets prepared by MC emulsification were microencapsulated with coacervate. The microcapsules produced by this technique were observed with a confocal laser scanning microscope. Average diameters of the inner cores and outer shells were 37.8 and 51.5 microm; their relative standard deviations were 4.9 and 8.4%.
Subject(s)
Drug Compounding/methods , Emulsions/chemical synthesis , Gelatin/chemistry , Gum Arabic/chemistry , Drug Compounding/instrumentation , Emulsifying Agents/chemistry , Emulsions/chemistry , Fluorescein-5-isothiocyanate/chemistry , Glycerol/analogs & derivatives , Glycerol/chemistry , Hydrogen-Ion Concentration , Laurates/chemistry , Microscopy, Fluorescence , Particle Size , Soybean Oil/chemistry , Surface-Active Agents/chemistryABSTRACT
Some spices showed high inhibitory activity against ovalbumin permeation through Caco-2 cell monolayers. Pimentol from allspice, rosmarinic acid and luteolin-7-O-beta-glucuronide from thyme, quercetin-3-O-beta-glucuronide from coriander and rutin from tarragon were identified as the active principles. A structure-activity relationship study among the active isolates and their related compounds indicated that the presence of a catechol structure played an important role in the inhibitory activity of each compound.